1975 Chevrolet K10 MSD Parts
Choose your Engine for your 1975 Chevrolet K10
Image
Product
Price
- J Hook Hold Down; Red HEI Ignition
- GM HEI Distributor Cap; J Hook Hold Down; Red;
- GM HEI Distributor Cap
- Product Attributes:
- Distributor Type: Gm
- WARNING CA Proposition 65: Yes
-
Features:
- Stock GM HEI replacement distributor cap
- Red
- Red, stock GM HEI distributor cap.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Chevrolet K10 | V | - | 8 Cyl 5.7L | 350 |
- Internal Coil; Has J-Hook Hold Down HEI Ignition
- Distributor Cap And Rotor Kit; Internal Coil; Has J-Hook Hold Down;
- Distributor Cap And Rotor Kit
- Product Attributes:
- Distributor Type: Accessories
- WARNING CA Proposition 65: Yes
-
Features:
- Designed w/Performance In Mind
- High Quality Material
- Stainless Terminals
- The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these Cap and Rotor Replacement Kits.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Chevrolet K10 | V | - | 8 Cyl 5.7L | 350 |
- For Use w/PN[8467] Conventional
- Distributor Cap; For Use w/PN[8467];
- Distributor Cap
- Product Attributes:
- Distributor Type: Chevy
- WARNING CA Proposition 65: Yes
-
Features:
- Update The GM Points Cap w/MSD Performance
- High Quality
- Voltage Insulating Material
- Low Resistance
- All MSD extra duty distributor caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low resistance terminals.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Chevrolet K10 | V | - | 8 Cyl 5.7L | 350 |
- Internal Coil; Has J-Hook Hold Down HEI Ignition
- Distributor Cap And Rotor Kit; Internal Coil; Has J-Hook Hold Down;
- Distributor Cap And Rotor Kit
- Product Attributes:
- Distributor Type: Accessories
- WARNING CA Proposition 65: Yes
-
Features:
- Designed w/Performance In Mind
- High Quality Material
- Stainless Terminals
- The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these Cap and Rotor Replacement Kits.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Chevrolet K10 | V | - | 8 Cyl 5.7L | 350 |
- For Use w/PN[8467] Conventional
- Distributor Cap; For Use w/PN[8467];
- Distributor Cap
- Product Attributes:
- Distributor Type: Chevy
- WARNING CA Proposition 65: Yes
-
Features:
- Update The GM Points Cap w/MSD Performance
- High Quality
- Voltage Insulating Material
- Low Resistance
- All MSD extra duty distributor caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low resistance terminals.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Chevrolet K10 | V | - | 8 Cyl 5.7L | 350 |
- GM Points Style Socket Cap Conventional
- Distributor Cap And Rotor Kit; GM Points Style Socket Cap;
- Distributor Cap And Rotor Kit
- Product Attributes:
- Distributor Type: Accessories
- WARNING CA Proposition 65: Yes
-
Features:
- Fits MSD/GM V8 Distributors
- The cap and rotor of any ignition system must be considered maintenance items. To make things easy, we offer these Cap and Rotor Replacement Kits
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Chevrolet K10 | V | - | 8 Cyl 5.7L | 350 |
- GM Points Style Socket Cap Conventional
- Distributor Cap And Rotor Kit; GM Points Style Socket Cap;
- Distributor Cap And Rotor Kit
- Product Attributes:
- Distributor Type: Accessories
- WARNING CA Proposition 65: Yes
-
Features:
- Fits MSD/GM V8 Distributors
- The cap and rotor of any ignition system must be considered maintenance items. To make things easy, we offer these Cap and Rotor Replacement Kits
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1975 - Chevrolet K10 | V | - | 8 Cyl 5.7L | 350 |
- Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; Iron Gear; Red;CARB E.O. D-40-39 Not Legal For Sale Or Use On Pollution Controlled Vehicles
- Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; Iron Gear; Red;
- Pro-Billet Distributor
- Product Attributes:
- Distributor Type: Magnetic Pickup
- Engine Make/Size:
- Chevy Big Block (396-454)
- Chevy Small Block (262-400)
-
Features:
- CNC machined billet aluminum housing and billet aluminum base
- Will not accept a vacuum advance canister
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500 steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSDs adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application. Must be used with an MSD 6, 7 or 8-series ignition.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 1975 - Chevrolet K10 | V | - | 8 Cyl 5.7L | Y | 350 |
- Includes Cap/Rotor/Vacuum Advance; Iron Gear;CARB E.O. D-40-39 CARB E.O. D-40-38~If Replacing A GM HEI- A Blaster SS Coil & Coil Wire Are Required
- Ready-To-Run Distributor; Includes Cap/Rotor/Vacuum Advance; Iron Gear;
- Ready-To-Run Distributor
- Product Attributes:
- Distributor Type: Ready To Run
- Engine Make/Size:
- Chevy Big Block (396-454)
- Chevy Small Block (262-400)
-
Features:
- Simple and clean three wire installation
- Supplied w/An HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-To-Adjust Mech. Advance w/Supplied Springs/Stop Bushings
- Vacuum advance canister for improved economy (can be locked out)
- The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 1975 - Chevrolet K10 | V | - | 8 Cyl 5.7L | Y | 350 |
- Includes Cap/Rotor/Vacuum Advance; Iron Gear;CARB E.O. D-40-39 If Replacing A GM HEI- A Blaster SS Coil and Coil Wire Are Required~CARB E.O. D-40-38
- Ready-To-Run Distributor; Includes Cap/Rotor/Vacuum Advance; Iron Gear;
- Ready-To-Run Distributor
- Product Attributes:
- Distributor Type: Ready To Run
- Engine Make/Size:
- Chevy Big Block (396-454)
- Chevy Small Block (262-400)
-
Features:
- Simple and clean three wire installation
- Supplied w/An HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-To-Adjust Mech. Advance w/Supplied Springs/Stop Bushings
- Vacuum advance canister for improved economy (can be locked out)
- The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 1975 - Chevrolet K10 | V | - | 8 Cyl 5.7L | Y | 350 |
Showing 1 - 10 of 50 products
Loading...