Image
Product
Price
- 8.5mm; Fits Ford Small Block Engines; HEI Boots; Black
- Custom Spark Plug Wire Set; 8.5mm; Fits Ford Small Block Engines; HEI Boots; Black;
- Custom Spark Plug Wire Set
- Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: Multi-angle
- Engine: Oem
- Engine Make/Size: Oem
-
Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Ford Bronco | V | - | 8 Cyl 5.0L | 302 |
- Street Fire™ Spark Plug Wire Set
- HEI; Multi-Angle Plug; Universal
- Street Fire™ Spark Plug Wire Set; HEI; Multi-Angle Plug; Universal;
- Street Fire(TM) Spark Plug Wire Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Multi-angle
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine: Universal 8 Cylinder
- Engine Make/Size: Universal 8 Cylinder
-
Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
- The street fire spark plug wires feature a low resistance conductor that's wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- 8.5mm; Fits Engines w/Late-model Type HEI Distributor Caps; Includes [8] 90 Degree Boots/Terminal Ends; Black
- Universal Spark Plug Wire Set; 8.5mm; Fits Engines w/Late-model Type HEI Distributor Caps; Includes [8] 90 Degree Boots/Terminal Ends; Black;
- Universal Spark Plug Wire Set
- Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: Multi-angle
- Engine: Universal 8 Cylinder
- Engine Make/Size: Universal 8 Cylinder
-
Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap - Boots and Terminals Included
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes [8] 90 Degree Boots/Terminal Ends
- Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. Its a little more work, but in the end it will be worth it.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- Red Super Conductor; 8.5mm; Fits 8 Cyl. Late Model HEI Caps [Ford Duraspark Or MSD Cap-A-Dapt]; Includes: Wires/90 Degree Boots/Terminals
- Universal Spark Plug Wire Set; Red Super Conductor; 8.5mm; Fits 8 Cyl. Late Model HEI Caps [Ford Duraspark Or MSD Cap-A-Dapt]; Includes: Wires/90 Degree Boots/Terminals;
- Universal Spark Plug Wire Set
- Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: 90 Degree
- Engine: Universal 8 Cylinder
- Engine Make/Size: Universal 8 Cylinder
-
Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap - Boots and Terminals Included
- Includes Mini-Stripper-Crimper
- Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. Its a little more work, but in the end it will be worth it.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- HEI; Multi-Angle Plug; Universal
- Street Fire™ Spark Plug Wire Set; HEI; Multi-Angle Plug; Universal;
- Street Fire™ Spark Plug Wire Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: Multi-angle
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine: Universal 8 Cylinder
- Engine Make/Size: Universal 8 Cylinder
-
Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
- The street fire spark plug wires feature a low resistance conductor that's wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- Red Super Conductor; 8.5mm; Fits 8 Cyl. Late Model HEI Caps [Ford Duraspark Or MSD Cap-A-Dapt]; Includes: Wires/90 Degree Boots/Terminals
- Universal Spark Plug Wire Set; Red Super Conductor; 8.5mm; Fits 8 Cyl. Late Model HEI Caps [Ford Duraspark Or MSD Cap-A-Dapt]; Includes: Wires/90 Degree Boots/Terminals;
- Universal Spark Plug Wire Set
- Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: 90 Degree
- Engine: Universal 8 Cylinder
- Engine Make/Size: Universal 8 Cylinder
-
Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap - Boots and Terminals Included
- Includes Mini-Stripper-Crimper
- Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. Its a little more work, but in the end it will be worth it.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- Iron Gear; Red;CARB E.O. D-40-39
- Ready-To-Run Distributor; Iron Gear; Red;
- Ready-To-Run Distributor
- Product Attributes:
- Distributor Type: Ready To Run
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size: Ford 289-302
-
Features:
- Now includes built-in Rev Limiter
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- Polished steel shaft is guided by a sealed ball bearing
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- Mech. advance assem. can be locked out for crank trigger systems
- MSDs Ready-to-Run Ford Distributors are the perfect upgrade for bulky DuraSpark systems or ancient breaker point models. These distributors come complete and ready-to-run. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pickup is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor youll find MSDs accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives. For protection, there is also an easy-to-set rev limiter!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Ford Bronco | V | - | 8 Cyl 5.0L | 302 |
- Steel Gear For Factory Roller Cam; w/Module;O.E.M. Replacement Part
- Pro-Billet Distributor; Steel Gear For Factory Roller Cam; w/Module;
- Pro-Billet Distributor
- Product Attributes:
- Distributor Type: Hei/breakerless
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size: Ford 351w
-
Features:
- Drop in billet replacement for late model Ford TFI 5.8L dist.
- Supplied w/steel gear to work w/factory roller camshafts
- Factory style ignition module connector accepts factory wiring
- CNC machined billet aluminum housing and billet aluminum base
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Supplied w/Late Model Distributor Cap And Rotor
- Legal to install in all 50 states
- When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state-of-theart Computer Numerical Control (CNC) machine where it is transformed into a precision housing. Inside each housing there is a sealed ball bearing at the top of the shaft. This design is responsible for accurately guiding the oversized polished steel shaft throughout the entire rpm range of your engine. The shaft is also QPQ-coated for friction reduction and corrosion resistance. The Pro-Billet Distributors use a stock-style trigger pick-up to accept factory connectors. For installation, you simply remove the stock distributor and bolt the Pro-Billet MSD in place! Each model is supplied with a high-quality cap with brass terminals for full spark delivery, heavy-duty rotor and a special gear to work with the factory camshafts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- 8.5mm; Fits Ford Small Block Engines; HEI Boots; Red
- Custom Spark Plug Wire Set; 8.5mm; Fits Ford Small Block Engines; HEI Boots; Red;
- Custom Spark Plug Wire Set
- Product Attributes:
- WARNING CA Proposition 65: No
- Boot Type: Multi-angle
- Engine:
- Ford Small Block
- Oem
-
Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to its great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSDs 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Ford Bronco | V | - | 8 Cyl 5.0L | 302 |
- HEI/90 deg.; Universal
- Street Fire™ Spark Plug Wire Set; HEI/90 deg.; Universal;
- Street Fire™ Spark Plug Wire Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Boot Type: 90 Degree
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine: Universal 8 Cylinder
- Engine Make/Size: Universal 8 Cylinder
-
Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
- The street fire spark plug wires feature a low resistance conductor that's wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
Showing 1 - 10 of 46 products
Loading...