Select a vehicle to find exact fit parts

1985 Mercury Capri

Back to vehicles list

1985 Mercury Capri MagnaFlow Performance Exhaust Parts

Choose your Engine for your 1985 Mercury Capri

4 Cyl 2.3L 6 Cyl 3.8L 8 Cyl 5.0L

Showing 1 - 9 of 9 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1985 Mercury Capri Catalytic Converter - Rear 6 Cyl 3.8L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1985 - Mercury Capri	V	-	Rear	6 Cyl 3.8L	232


Brand	MagnaFlow Performance Exhaust
Part #	94005
Condition	New
Warehouse	C

UPC: 841380012340

1985 Mercury Capri Catalytic Converter 4 Cyl 2.3L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 1
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: Yes
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94015 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1985 - Mercury Capri	L	-	4 Cyl 2.3L	140


Brand	MagnaFlow Performance Exhaust
Part #	94015
Condition	New
Warehouse	C

UPC: 841380012418

1985 Mercury Capri Catalytic Converter - Rear 8 Cyl 5.0L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.50in.
with Single Exhaust Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 2
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5.5
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: Yes
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 0
Features:
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Compact, lightweight construction enables installation in confined areas, welding is required
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94026 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1985 - Mercury Capri	V	-	Rear	8 Cyl 5.0L	302


Brand	MagnaFlow Performance Exhaust
Part #	94026
Condition	New
Warehouse	C

UPC: 841380012463

1985 Mercury Capri Catalytic Converter 6 Cyl 3.8L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required Main and Pre-Converter
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 1
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: Yes
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93515 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1985 - Mercury Capri	V	-	6 Cyl 3.8L	232


Brand	MagnaFlow Performance Exhaust
Part #	93515
Condition	New
Warehouse	C

UPC: 841380011978

1985 Mercury Capri Catalytic Converter 8 Cyl 5.0L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.50in.
Replaces Front and Rear Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 1
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: Yes
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93516 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1985 - Mercury Capri	V	-	8 Cyl 5.0L	302


Brand	MagnaFlow Performance Exhaust
Part #	93516
Condition	New
Warehouse	C

UPC: 841380011985

1985 Mercury Capri Catalytic Converter 4 Cyl 2.3L MagnaFlow Performance Exhaust

Standard Grade Direct-Fit Catalytic Converter
Magnaflow Standard Grade Direct-Fit Catalytic Converter
Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Air Tube Count: 1
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: Yes
- California Air Resources Board (CARB) Certified: No
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23363 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1984-1986 Ford Mustang, 1984-1986 Mercury Capri, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1985 - Mercury Capri	L	-	4 Cyl 2.3L	140


Brand	MagnaFlow Performance Exhaust
Part #	23363
Condition	New
Warehouse	C

UPC: 841380007582

1985 Mercury Capri Catalytic Converter - Front Left 6 Cyl 3.8L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 3
- Body Height: 3
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50005. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1985 - Mercury Capri	V	-	Front Left	6 Cyl 3.8L	232


Brand	MagnaFlow Performance Exhaust
Part #	50005
Condition	New
Warehouse	C

UPC: 841380010773

1985 Mercury Capri Catalytic Converter - Front 8 Cyl 5.0L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
with Dual Exhaust Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 3
- Body Height: 3
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50005. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:

Vehicle	Block	CC	Transmission	Position	Engine	CID
1985 - Mercury Capri	V	-	Manual	Front	8 Cyl 5.0L	302


Brand	MagnaFlow Performance Exhaust
Part #	50005
Condition	New
Warehouse	C

UPC: 841380010773

1985 Mercury Capri Catalytic Converter - Front Right 6 Cyl 3.8L MagnaFlow Performance Exhaust

Standard Grade Universal Catalytic Converter - 2.25in.
Cutting and Welding Required
Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 3
- Body Height: 3
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50005. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.