1986 Volkswagen Quantum MagnaFlow Performance Exhaust Parts
Image
Product
Price
- Standard Grade Universal Catalytic Converter - 2.25in.
- Standard Series; 2.25in. Tubing; 2.25in. In/Out; Overall L-13in.; W-4.375 in.; Conv L-9in.; NotAirTubeKitAdaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
- Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
- 53000 Series OBDII Compliant Universal Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Inlet Diameter: 2.250 In.
- WARNING CA Proposition 65: No
- Outlet Mounting Hardware Included: No
- Body Width:
- 4.375
- 4.375 In.
- Outlet Attachment Type: Weld-on
- Body Height: 5.125
- Inlet Mounting Hardware Included: No
- Recommended Use: Converter
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Heat Shield Included: Yes
- Core Shape: Round
- Air Tube Adaptable: No
- California Air Resources Board (CARB): No
- Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Post Converter
- Hangers Included: No
- Heat Shield Attached: Yes
- CARB Executive Order Number: Not Applicable
- Subtitles: Federal / Epa Compliant
- Body Type:
- Clam Shell
- Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter:
- 2.25
- 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Substrate Material: Ceramic
- Main Piping Diameter: 2.250 In.
- Converter Body Size: 4.375 In. O.d.
- Outlet Orientation: Straight
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Inlet Quantity: 1
- Body Shape: Round
- Core Substrate Material: Ceramic
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 1
- Emission: Non-california (49-state)
- Inlet Attachment Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53035. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1986 - Volkswagen Quantum | L | 2226 | Front | 5 Cyl 2.2L | - |
- Standard Grade Universal Catalytic Converter - 2.00in.
- Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.75
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Post Converter
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 1
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53134 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Volkswagen Quantum | L | 2226 | 5 Cyl 2.2L | - |
- Standard Grade Universal Catalytic Converter - 2.25in.
- Standard Series; 2.25in. Tubing; 2.25in. In/Out; Overall L-13in.; W-4.375 in.; Conv L-9in.; NotAirTubeKitAdaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
- Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
- 53000 Series OBDII Compliant Universal Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Inlet Diameter: 2.250 In.
- WARNING CA Proposition 65: No
- Outlet Mounting Hardware Included: No
- Body Width:
- 4.375
- 4.375 In.
- Outlet Attachment Type: Weld-on
- Body Height: 5.125
- Inlet Mounting Hardware Included: No
- Recommended Use: Converter
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Heat Shield Included: Yes
- Core Shape: Round
- Air Tube Adaptable: No
- California Air Resources Board (CARB): No
- Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Post Converter
- Hangers Included: No
- Heat Shield Attached: Yes
- CARB Executive Order Number: Not Applicable
- Subtitles: Federal / Epa Compliant
- Body Type:
- Clam Shell
- Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter:
- 2.25
- 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Substrate Material: Ceramic
- Main Piping Diameter: 2.250 In.
- Converter Body Size: 4.375 In. O.d.
- Outlet Orientation: Straight
- Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
- Inlet Quantity: 1
- Body Shape: Round
- Core Substrate Material: Ceramic
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 1
- Emission: Non-california (49-state)
- Inlet Attachment Type: Weld-on
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53035. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1986 - Volkswagen Quantum | L | 2226 | Front | 5 Cyl 2.2L | - |
Showing 1 - 3 of 3 products
Loading...