1999 Ford F 250 Super Duty MagnaFlow Performance Exhaust Parts
Choose your Engine for your 1999 Ford F-250 Super Duty
Image
Product
Price
- HM Grade Universal Catalytic Converter - 5.00in.
- Cutting and Welding Required Spun Body Legal for sale and use in the state of Colorado per regulation number 20, effective 12/15/2023
- Magnaflow HM Grade Universal Catalytic Converter - 5.00in.
- Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6
- Body Height: 6
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 5
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 60112. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- HM Grade Universal Catalytic Converter - 4.00in.
- Universal Replacement Cutting and Welding Required Legal for sale and use in the state of Colorado per regulation number 20, effective 12/15/2023
- Magnaflow HM Grade Universal Catalytic Converter - 4.00in.
- Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6
- Body Height: 6
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 4
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 4
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 60111. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 445 |
- Direct-Fit Exhaust Pipe
- Cutting and Welding Required
- Magnaflow Direct-Fit Exhaust Pipe
- Exhaust Diesel Pipe
- Product Attributes:
- Clamps Included: No
- Pipe Diameter: 4
- Quantity: 1
-
Features:
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
- Superior flow & performance
- The MagnaFlow 4" X 34" Extension 15451 includes a 34in. long, 4in. diameter stainless steel pipe optimized for superior flow characteristics and performance. 15451 is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 96.0 | Crew Cab Pickup | 445 |
- Direct-Fit Exhaust Pipe
- Magnaflow Direct-Fit Exhaust Pipe
- Exhaust Tail Pipe
- Product Attributes:
- Clamps Included: No
- Main Piping Diameter: 4
- Welded Hanger: No
- Grade Type: Performance
- Outlet Inside Diameter: 4
- Exit Style: Single Passenger Side Rear
- Inlet Inside Diameter: 4
- Pipe Bend Type: Mandrel
-
Features:
- Mandrel bent tubing
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
- The MagnaFlow Performance Exhaust Tailpipe 15455 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15455 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 81.0 | Extended Cab Pickup | 445 |
- Multi-Chamber Performance Muffler; 3/2.5in. Center/Dual; 4x14x9 Body
- Magnaflow Multi-Chamber Performance Muffler; 3/2.5in. Center/Dual; 4x14x9 Body
- XL 3x2.5in. Satin Finish Oval Exhaust Muffler
- Product Attributes:
- Outlet Quantity: 2
- Muffler Type: Multi-chamber
- Inlet Quantity: 1
- Exhaust Tip Quantity: 0
- Outlet Inside Diameter: 2.5
- Core Diameter: 2.5
- Reversible: Yes
- Inlet Inside Diameter: 3
- Hanger Included: No
- Body Height: 4
- Body Material: Stainless Steel
-
Features:
- Superior flow & performance
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
- The MagnaFlow XL 4 X 9in. Oval Multi-Chamber Performance Exhaust Muffler 13288 features a straight-through, weight-optimized reversible design with a perforated stainless steel core featuring baffles and tuning gates, enabling it to deliver the powerful signature sound and dyno-proven performance that's made MagnaFlow a household name. Muffler 13288's oval-shaped, 4x9x14in. body and universal 3/2.5in. diameter inlet/outlet layout enables flexible installation options to match the spacing requirements of your vehicle. Professional installation is highly recommended. 13288 is produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless-steel construction, all backed by MagnaFlow's limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 5.4L | 330 |
- Direct-Fit Exhaust Pipe
- For Vehicles not Originally Equipped with a Catalytic Converter
- Magnaflow Direct-Fit Exhaust Pipe
- Exhaust Diesel Turbo Downpipe
- Product Attributes:
- Clamps Included: No
- Main Piping Diameter: 3.5
- Grade Type: Performance
- Pipe Diameter: 3.5
- Quantity: 2
- Hangers Included: No
- Oxygen Sensor Port: No
- Oxygen Sensor Bung Plug Included: No
- Pipe Bend Type:
- 3 In 1
- Mandrel
-
Features:
- Mandrel bent tubing
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
- The MagnaFlow Performance Exhaust Diesel Turbo Downpipe 15459 is a 3.5in. diameter mandrel bent stainless steel pipe designed to connect near your turbocharger and is weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 8 Cyl 7.3L | 81.0 | Extended Cab Pickup | 445 |
- Single Passenger Side Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 24
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 15869 brings out the personality of your 6.8L 1999-2004 Ford with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Ford exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15869 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15869 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 1999 - Ford F-250 Super Duty | V | - | 10 Cyl 6.8L | Crew Cab Pickup | 415 |
Showing 1 - 7 of 7 products
Loading...