2000 Ford Excursion MagnaFlow Performance Exhaust Parts
Choose your Engine for your 2000 Ford Excursion
Image
Product
Price
- HM Grade Universal Catalytic Converter - 3.00in.
- with Federal Emissions System Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 3.00in.
- Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 7.625
- Body Height: 7.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Post Converter
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 3
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 3
- Sensor Port Count: 1
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 55400 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
F4TZ 5E212-A
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Excursion | V | - | 10 Cyl 6.8L | 415 |
- HM Grade Universal Catalytic Converter - 3.00in.
- with California Emissions System Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 3.00in.
- Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 7.625
- Body Height: 7.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Post Converter
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 3
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 3
- Sensor Port Count: 1
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 55400 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Excursion | V | - | 8 Cyl 5.4L | 330 |
- HM Grade Direct-Fit Catalytic Converter
- with Federal Emissions System
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 0
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 55323 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2000-2004 Ford F-250 Super Duty, 2000-2004 Ford F-350 Super Duty, and more, this direct-fit catalytic converter also interchanges with OE parts 1C3Z-5E212-AA and 1C3Z-5E212-DA, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
1C3Z 5E212-AA, 1C3Z 5E212-BA, 1C3Z 5E212-DA, 1C3Z-5E212-AA, 1C3Z-5E212-DA, 2C3Z 5E212-JA, 2C3Z 5E212-PA, 2C3Z-5E212-AA, 2C3Z-5E212-CA, 2C3Z-5E212-JA, 3C3Z-5E212-GA, 3C3Z-5E212-GB, 3C7Z 5E212-AA, 3C7Z-5E212-AA, YC3Z 5E212-AA, YC3Z 5E212-FA, YC3Z-5E212-AA, YC3Z-5E212-BA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Excursion | V | - | 8 Cyl 5.4L | 330 |
- HM Grade Direct-Fit Catalytic Converter
- with California Emissions System
- Magnaflow HM Grade Direct-Fit Catalytic Converter
- Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Post Converter
- Outlet Gasket Included: No
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: No
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 55324 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2000-2004 Ford F-250 Super Duty, 2000-2004 Ford F-350 Super Duty, and more, this direct-fit catalytic converter also interchanges with OE parts 2C3Z-5E212-PA and 4C3Z-5E212-BA, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
This Part Fits the Following OEM/Substitute Numbers:
1C3Z 5E212-AA, 1C3Z 5E212-BA, 1C3Z 5E212-DA, 1C3Z-5E212-BA, 1C3Z-5E212-EA, 2C3Z 5E212-JA, 2C3Z 5E212-PA, 2C3Z-5E212-NA, 2C3Z-5E212-PA, 4C3Z-5E212-BA, 4C3Z-5E212-NA, YC3Z 5E212-AA, YC3Z 5E212-FA, YC3Z-5E212-BB, YC3Z-5E212-GA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Excursion | V | - | 10 Cyl 6.8L | 415 |
- Direct-Fit Exhaust Pipe
- Cutting and Welding Required
- Magnaflow Direct-Fit Exhaust Pipe
- Exhaust Diesel Pipe
- Product Attributes:
- Clamps Included: No
- Pipe Diameter: 4
- Quantity: 1
-
Features:
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
- Superior flow & performance
- The MagnaFlow 4" X 34" Extension 15451 includes a 34in. long, 4in. diameter stainless steel pipe optimized for superior flow characteristics and performance. 15451 is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Excursion | V | - | 8 Cyl 7.3L | 445 |
- Direct-Fit Exhaust Pipe
- Magnaflow Direct-Fit Exhaust Pipe
- Exhaust Tail Pipe
- Product Attributes:
- Clamps Included: No
- Main Piping Diameter: 4
- Welded Hanger: No
- Grade Type: Performance
- Outlet Inside Diameter: 4
- Exit Style: Single Passenger Side Rear
- Inlet Inside Diameter: 4
- Pipe Bend Type: Mandrel
-
Features:
- Mandrel bent tubing
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
- The MagnaFlow Performance Exhaust Tailpipe 15455 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15455 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Excursion | V | - | 8 Cyl 7.3L | 445 |
- Direct-Fit Exhaust Pipe
- For Vehicles not Originally Equipped with a Catalytic Converter
- Magnaflow Direct-Fit Exhaust Pipe
- Exhaust Diesel Turbo Downpipe
- Product Attributes:
- Clamps Included: No
- Main Piping Diameter: 3.5
- Grade Type: Performance
- Pipe Diameter: 3.5
- Quantity: 2
- Hangers Included: No
- Oxygen Sensor Port: No
- Oxygen Sensor Bung Plug Included: No
- Pipe Bend Type:
- 3 In 1
- Mandrel
-
Features:
- Mandrel bent tubing
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
- The MagnaFlow Performance Exhaust Diesel Turbo Downpipe 15459 is a 3.5in. diameter mandrel bent stainless steel pipe designed to connect near your turbocharger and is weight-optimized with superior flow characteristics and performance. Each performance pipe is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Ford Excursion | V | - | 8 Cyl 7.3L | 445 |
Showing 1 - 7 of 7 products
Loading...