2007 Dodge Ram 2500 MagnaFlow Performance Exhaust Parts
Choose your Engine for your 2007 Dodge Ram 2500
Image
Product
Price
- HM Grade Universal Catalytic Converter - 5.00in.
- Cutting and Welding Required Spun Body Legal for sale and use in the state of Colorado per regulation number 20, effective 12/15/2023
- Magnaflow HM Grade Universal Catalytic Converter - 5.00in.
- Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6
- Body Height: 6
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 5
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 60112. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 359 |
- HM Grade Universal Catalytic Converter - 4.00in.
- Universal Replacement Cutting and Welding Required Legal for sale and use in the state of Colorado per regulation number 20, effective 12/15/2023
- Magnaflow HM Grade Universal Catalytic Converter - 4.00in.
- Universal HM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6
- Body Height: 6
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 4
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 4
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 60111. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 359 |
- Direct-Fit Diesel Oxidation Catalyst
- Legal for sale and use in the state of Colorado per regulation number 20, effective 12/15/2023
- MagnaFlow Direct-Fit Diesel Oxidation Catalyst
- Direct-Fit OEM Grade DOC Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Gasket Included: No
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: Yes
- Outlet Mounting Hardware Included: No
- Body Width: 6
- Body Height: 6
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Metallic
- Inlet Attachment: Clamp-on
- Outlet Quantity: 1
- Heat Shield Included: No
- Inlet Quantity: 1
- Outlet Attachment: Bolt-on
- Sensor Port Count: 1
- Converter Quantity: 1
- Clamp Included: No
-
Features:
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 60507. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2007-2010 Dodge Ram 2500, 2007-2010 Dodge Ram 3500, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Dodge Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- Direct-Fit Exhaust Pipe
- Magnaflow Direct-Fit Exhaust Pipe
- Exhaust Tail Pipe
- Product Attributes:
- Clamps Included: No
- Main Piping Diameter: 4
- Welded Hanger: No
- Grade Type: Performance
- Outlet Inside Diameter: 4
- Exit Style: Single Passenger Side Rear
- Inlet Inside Diameter: 4
- Pipe Bend Type: Mandrel
-
Features:
- Mandrel bent tubing
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
- The MagnaFlow Performance Exhaust Tailpipe 15452 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15452 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2007 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | Extended Crew Cab Pickup | 359 |
- Pro Series Diesel 5in. Cat-Back
- Single Passenger Side Rear Exit
- MagnaFlow Pro Series Diesel 5in. Cat-Back
- MagnaFlow PRO Series Diesel Cat-Back System
- Product Attributes:
- Muffler Type: Straight-through
- Exhaust Tip Quantity: 0
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Muffler Body Width: 7
- Muffler Quantity: 1
- Muffler Body Length: 24
- Clamps Included: Yes
- Main Piping Diameter: 5
- Clamping Type: Band Clamp
- Muffler Body Height: 7
- Muffler Finish: Brushed
- Valve Included: No
- Muffler Body Material: Stainless Steel
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
-
Features:
- Throaty, powerful performance sound Magnaflow is famous for
- Attention grabbing design thanks to an aggressive style
- Intercooled tips
- The MagnaFlow Pro Series Cat-Back Performance Exhaust System17876 enhances your truck with an exhaust that has been weight-optimized and tuned to produce our famous deep signature sound and dyno-proven performance. 17876's mandrel bent 5in. diameter main piping passes through a 1 Straight-Through mufflers before terminating in a Single Passenger Side Rear exit. Exhaust kit 17876 is engineered to produce Aggressive exterior and Moderate interior sound levels. Installation is made easy thanks to this exhaust system's direct-fit, do-it-yourself design. This cat-back emissions-legal exhaust system is made of durable, corrosion resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2007 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | Extended Crew Cab Pickup | 359 |
- PRO DPF Series Diesel 5in. Filter-Back
- Single Passenger Side Rear Exit
- MagnaFlow PRO DPF Series Diesel 5in. Filter-Back
- MagnaFlow PRO DPF Series Diesel Filter-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Quantity: 1
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 0
- Clamps Included: Yes
- Main Piping Diameter: 5
- Clamping Type: Band Clamp
- Exhaust Tip Intercooled: Yes
- Exhaust Tip Length: 13
- Exhaust Tip Resonated: No
- Valve Included: No
- Exhaust Tip Shape: Round
- Exhaust Tip Diameter: 6
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Throaty, powerful performance sound Magnaflow is famous for
- Attention grabbing design thanks to an aggressive style
- Intercooled tips
- The MagnaFlow Ram PRO DPF Series 17874 utilizes it's weight-optimized, durable, corrosion resistant stainless steel design to enhance your truck with MagnaFlow’s signature sound and dyno-tested performance. 17874’s 5in. diameter mandrel bent main piping features a muffler delete and terminates in a Single Passenger Side Rear exit with 6in. Polished Welded-Single Wall-Angle Cut-Rolled Edge-Intercooled tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17874 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow’s limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2007 - Dodge Ram 2500 | L | - | 6 Cyl 6.7L | Crew Cab Pickup | 408 |
- Direct-Fit Exhaust Pipe
- Cutting and Welding Required
- Magnaflow Direct-Fit Exhaust Pipe
- Exhaust Diesel Pipe
- Product Attributes:
- Clamps Included: No
- Pipe Diameter: 4
- Quantity: 1
-
Features:
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
- Superior flow & performance
- The MagnaFlow 4" X 34" Extension 15451 includes a 34in. long, 4in. diameter stainless steel pipe optimized for superior flow characteristics and performance. 15451 is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2007 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | Crew Cab Pickup | 359 |
Showing 1 - 7 of 7 products
Loading...