2008 Ford F 350 Super Duty MagnaFlow Performance Exhaust Parts
Choose your Engine for your 2008 Ford F-350 Super Duty
Image
Product
Price
- OEM Grade Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.50in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 1
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2008 - Ford F-350 Super Duty | V | - | Left | 8 Cyl 5.4L | 330 |
- OEM Grade Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.50in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 1
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51356 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2008 - Ford F-350 Super Duty | V | - | Right | 8 Cyl 5.4L | 330 |
- Black DPF Series Diesel 5in. Filter-Back
- Single Passenger Side Rear Exit
- Magnaflow Black DPF Series Diesel 5in. Filter-Back
- Black DPF Series Diesel Filter-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Quantity: 1
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 0
- Clamps Included: Yes
- Main Piping Diameter: 5
- Clamping Type: Band Clamp
- Exhaust Tip Intercooled: Yes
- Exhaust Tip Length: 13
- Exhaust Tip Resonated: No
- Valve Included: No
- Exhaust Tip Shape: Round
- Exhaust Tip Diameter: 6
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Black Coated
-
Features:
- Mandrel Bent Tubing
- 409 Stainless Steel Construction with High Temp Satin Black Coating
- 300 Series Stainless Steel Black Coated Intercooled Tip(s)
- The MagnaFlow Black Series Filter-Back Performance Exhaust System 17067 brings the dyno-proven performance and deep resonating sound that we're known for to your 6.4L, 6.7L 2008-2024 Ford in premium kit that includes tailpipe with a premium black powder-coated finish. This Ford exhaust system is designed to produce Mild interior and Moderate exterior sound levels thanks to clever tuning of its fast-flowing mandrel bent 5in. diameter main piping that ends in a Single Passenger Side Rear exit with 6in. Black Coated Welded-On Single Wall Angle Cut Rolled Edge tips. Exhaust kit 17067's filter-back layout features a direct-fit, easy-to-install design and is made of strong, corrosion-resistant stainless steel. It is produced using CNC precision robotic manufacturing techniques and backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2008 - Ford F-350 Super Duty | V | - | 8 Cyl 6.4L | Crew Cab Pickup | 391 |
- PRO DPF Series Diesel 4in. Filter-Back
- Dual Same Side Behind Passenger Rear Tire Exit
- MagnaFlow PRO DPF Series Diesel 4in. Filter-Back
- MagnaFlow PRO DPF Series Diesel Filter-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Quantity: 2
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Same Side Behind Passenger Rear Tire
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 0
- Clamps Included: Yes
- Main Piping Diameter: 4
- Clamping Type: Band Clamp
- Exhaust Tip Intercooled: Yes
- Exhaust Tip Length: 13
- Exhaust Tip Resonated: No
- Valve Included: No
- Exhaust Tip Shape: Round
- Exhaust Tip Diameter: 5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Throaty, powerful performance sound Magnaflow is famous for
- Attention grabbing design thanks to an aggressive style
- Intercooled tips
- The MagnaFlow Pro Series Filter-Back Performance Exhaust System 17873 utilizes its weight-optimized, durable, corrosion resistant stainless steel design to enhance your 6.4L, 6.7L 2008-2024 Ford with MagnaFlow's signature sound and dyno-tested performance. 17873's 4in. diameter mandrel bent main piping features a muffler delete and terminates in a Dual Same Side Behind Passenger Rear Tire exit with 5in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17873 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow's limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2008 - Ford F-350 Super Duty | V | - | 8 Cyl 6.4L | Extended Cab Pickup | 391 |
Showing 1 - 4 of 4 products
Loading...