Image
Product
Price
- SHOCKS
- FRONT SHOCK - STOCK HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, LARGE DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN FEATURES A VULCANIZED RUBBER LOWER BUSHING 15.0" EXTENDED, 9.5" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 1450SL IS A SINGLE STEM-TO-LOOP FRONT SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2003 - Dodge Ram 1500 | RWD |
- SHOCKS
- REAR SHOCK - 5-6" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, 1.5" WIDE SLEEVES FOR UP TO A 9/16"/14MM MOUNTING BOLT 20.3" EXTENDED, 12.4" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 2000LL-4 IS A SINGLE LOOP-TO-LOOP REAR SHOCK: TWIN TUBE, STEEL BODY, BLACK
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2003 - Dodge Ram 1500 | RWD |
- FRONT LIFT COILS W/ MT SHOCKS
- 2.5" FRONT LIFT COILS WITH LIFT COILS INSTALLED, UPPER CONTROL ARM CAN MAKE CONTACT WITH COIL BUCKET AT FULL DROOP AND CAUSE A "BANG" SOUND. TO AVOID THIS, WE RECOMMEND ADDING OUR FORGED ALUMINUM UNIBALL UCA'S (PART# 852400) CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 2.5" FRONT LIFT COILS W/ MT SHOCKS (5.7L)
- MAXTRAC SUSPENSION'S PART# 872171 IS A SET OF 2.5" FRONT LIFT COILS & FRONT MAXTRAC SHOCKS MADE FROM HOT WOUND STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2003 - Dodge Ram 1500 | RWD |
- FRONT LIFT COILS W/ FOX SHOCKS
- 2.5" FRONT LIFT COILS W/ FOX SHOCKS CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9" WIDE RIMS FENDER TRIMMING MAY BE REQUIRED DUE TO FOX SHOCKS BEING LONGER, UCA'S CAN MAKE CONTACT W/ COIL BUCKET WHEN SUSPENSION DROOPS OUT AND CAN MAKE NOISE MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 872170F IS A PAIR OF 2.5" FRONT LIFT COILS W/ FOX 2.0 PERFORMANCE SERIES FRONT SHOCKS MADE FROM HOT WOUND STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2003 - Dodge Ram 1500 | RWD |
- BLOCKS / U-BOLTS
- 2" LIFT BLOCKS BUILT WITH 2 DEGREES OF ANGLE REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 810020 IS A PAIR OF 2" LIFT BLOCKS CAST FROM STEEL & COATED W/ A BLACK FINISH
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Dodge Ram 1500 |
- U-BOLTS
- U-BOLT DIMS: 13.00" x 3.625" x 0.562" GOLD ZINC PLATED FINISH MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- ROUND U-BOLTS (13.5" X 3.625" X 9/16")
- MAXTRAC SUSPENSION'S PART# 910205 IS A SET OF 9/16" ROUND U-BOLTS (FITS MULTIPLE SPECIFIC APPLICATIONS)
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Dodge Ram 1500 |
- SHACKLES
- 2" REAR LIFT SHACKLES THESE SHACKLES GIVE 2" OF DROP ON 2019+ GM 1500 2WD/4WD OR 2" LIFT ON 2002-2008 RAM 1500 2WD/4WD MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 2" LOWERING SHACKLES
- MAXTRAC SUSPENSION'S PART# 712120 IS A PAIR OF 2" REAR SHACKLES FABRICATED FROM STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Dodge Ram 1500 |
- BLOCKS / U-BOLTS
- 1" LIFT BLOCKS BUILT WITH ZERO DEGREES OF ANGLE REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 810010 IS A PAIR OF 1" LIFT BLOCKS CAST FROM STEEL & COATED W/ A BLACK FINISH
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Dodge Ram 1500 |
- TORSION KEYS
- 1"-3" LIFT TORSION KEYS CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- MAXTRAC SUSPENSION'S PART# 842113 IS A PAIR OF LIFT TORSION KEYS FORGED FROM STEEL & POWDER COATED GREY
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2003 - Dodge Ram 1500 | 4WD |
- REAR LIFT BOX KIT W/ FOX SHOCKS
- 2" REAR LIFT KIT W/ FOX SHOCKS THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 702145 TO MAKE A COMPLETE 4.5" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES
- 2" REAR LIFT BOX KIT W/ FOX SHOCKS
- MAXTRAC SUSPENSION'S PART# 902120F IS A REAR BOX KIT INCLUDING 2" LIFT BLOCKS, U-BOLTS & A PAIR OF FOX 2.0 PERFORMANCE SERIES REAR SHOCKS
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2003 - Dodge Ram 1500 | RWD |
Showing 1 - 10 of 15 products
Loading...