2006 Toyota Tacoma MaxTrac Parts

Choose your Submodel for your 2006 Toyota Tacoma


Showing 1 - 10 of 48 products
Image
SKU
Product
Rating
Price

MaxTrac
  • 2 in.; Cast Iron; E-Coated; Tapered
  • Lift Blocks; 2 in.; Cast Iron; E-Coated; Tapered;
  • Lift Blocks
  • Product Attributes:
    • Lift/Drop Height: 2 In.
  • Features:
    • 100 Percent Bolt On Installation
    • Ductile Iron Construction
    • Increased Ground Clearance
    • Angled For Pinion Correction
  • Lift Blocks; 2 in.; Cast Iron; E-Coated; Tapered

Additional Fitment Information:
Vehicle
2006 - Toyota Tacoma

MaxTrac
  • 6 in. Lift; Includes Front Spindles With Brake Lines/Front Strut Spacers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear MaxTrac Shocks 6 Lug Wheel
  • Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Front Spindles With Brake Lines/Front Strut Spacers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear MaxTrac Shocks;
  • Suspension Lift Kit w/Shocks
  • Product Attributes:
    • Lift/Drop Height: 6 In.
  • Features:
    • Comes With DOT Approved Extended Brake Lines
    • Will Clear 35 in. Tire
    • Track Width Increases Plus .75 in. Per Side
    • Prior To Installation Measuring Is Required
    • Trimming May Be Required For Optimal Fender Well Clearance
  • The Maxtrac Suspension 6.5-inch lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac strut spacer on top of the factory strut to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Drive Type CID
2006 - Toyota Tacoma V 3956 6 Cyl 4.0L Base RWD 241

MaxTrac
  • 1 in.; Cast Iron; E-Coated; Non Tapered
  • Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered;
  • Lift Blocks
  • Product Attributes:
    • Lift/Drop Height: 1 In.
  • Features:
    • 100 Percent Bolt On Installation
    • Ductile Iron Construction
    • Increased Ground Clearance
  • Lift Blocks; 1 in.; Cast Iron; E-Coated; Non Tapered

Additional Fitment Information:
Vehicle
2006 - Toyota Tacoma

MaxTrac
  • 3 in.; Fabricated Steel; Tapered; Powder Coated Grey
  • Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey;
  • Lift Blocks
  • Product Attributes:
    • Lift/Drop Height: 3 In.
  • Features:
    • Made In The USA
    • Fabricated Steel Blocks
    • Powder Coated For A Long Life
    • Angled For Pinion Correction
  • Lift Blocks; 3 in.; Fabricated Steel; Tapered; Powder Coated Grey

Additional Fitment Information:
Vehicle
2006 - Toyota Tacoma

MaxTrac
  • 6 in. Lift; Includes Front Spindles With Brake Lines/Front Strut Spacers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear MaxTrac Shocks
  • Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Front Spindles With Brake Lines/Front Strut Spacers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear MaxTrac Shocks;
  • Suspension Lift Kit w/Shocks
  • Product Attributes:
    • Lift/Drop Height: 6 In.
  • Features:
    • Comes With DOT Approved Extended Brake Lines
    • Will Clear 35 in. Tire
    • Track Width Increases Plus .75 in. Per Side
    • Prior To Installation Measuring Is Required
    • Trimming May Be Required For Optimal Fender Well Clearance
  • The Maxtrac Suspension 6.5-inch lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac strut spacer on top of the factory strut to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2006 - Toyota Tacoma V 3956 6 Cyl 4.0L Pre Runner 241

MaxTrac
  • 6 in. Lift; Includes Front Spindles With Brake Lines/Front Fox 2.0 Coilovers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear Fox Performance Shocks 6 Lug Wheel
  • Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Front Spindles With Brake Lines/Front Fox 2.0 Coilovers/Rear Blocks/U-Bolts/Rear Brake Line Brackets/Rear Fox Performance Shocks;
  • Suspension Lift Kit w/Shocks
  • Product Attributes:
    • Lift/Drop Height: 6 In.
  • Features:
    • Provide Additional Clearance For Your Vehicle
    • Allowing A Larger Tire Size
    • Made In The USA
  • The Maxtrac Suspension 6.5-lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then replace the factory strut with a Fox fully adjustable Coil-over to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Fox performance shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Drive Type CID
2006 - Toyota Tacoma V 3956 6 Cyl 4.0L Base RWD 241

MaxTrac
  • 4 in. Lift; w/Extended Brake Lines; Made From Ductile Iron; E-Coated; Includes All Necessary Hardware 6 Lug Wheel
  • Axle Spindle; 4 in. Lift; w/Extended Brake Lines; Made From Ductile Iron; E-Coated; Includes All Necessary Hardware;
  • Axle Spindle
  • Features:
    • Ductile Iron Construction
    • Trimming May Be Required For Optimal Fender Well Clearance
    • Will Clear 33 in. Tire
  • Axle Spindle; 4 in. Lift; w/Extended Brake Lines; Made From Ductile Iron; E-Coated; Includes All Necessary Hardware

Additional Fitment Information:
Vehicle Sub Model Drive Type
2006 - Toyota Tacoma Base RWD

MaxTrac
  • 4 in. Lift; Includes Front Spindles With Brake Lines/Rear Blocks/U-Bolts/Rear MaxTrac Shocks 6 Lug Wheel
  • Suspension Lift Kit w/Shocks; 4 in. Lift; Includes Front Spindles With Brake Lines/Rear Blocks/U-Bolts/Rear MaxTrac Shocks;
  • Suspension Lift Kit w/Shocks
  • Product Attributes:
    • Lift/Drop Height: 4 In.
  • Features:
    • 100 Percent Bolt On Installation
    • Comes With DOT Approved Extended Brake Lines
    • Will Clear 33 in. Tire
    • 17 in. Wheel Or Larger With 4.75 in. Backspacing Or Less
    • Track Width Increases Plus .75 in. Per Side
    • Prior To Installation Measuring Is Required
    • Trimming May Be Required For Optimal Fender Well Clearance
  • The Maxtrac Suspension 4-inch lift for the Toyota Tacoma platform is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Drive Type CID
2006 - Toyota Tacoma V 3956 6 Cyl 4.0L Base RWD 241

MaxTrac
  • 2 Pc.; w/High Performance Coils; Fully Adjustable From 0-2 in. Of Lift; Direct Bolt On;w/2.5 in. Lift;
  • Factory Replacement Coil-Over Shocks; 2 Pc.; w/High Performance Coils; Fully Adjustable From 0-2 in. Of Lift; Direct Bolt On;
  • Factory Replacement Coil-Over Shocks
  • Product Attributes:
    • Shock Stroke: 2.000 In.
  • Features:
    • Coil Over
  • Factory Replacement Coil-Over Shocks; w/High Performance Coils; Fully Adjustable From 0-2 in. Of Lift; Direct Bolt On

Additional Fitment Information:
Vehicle Position Sub Model
2006 - Toyota Tacoma Front Pre Runner

MaxTrac
  • 4 in. Lift; Includes Front Spindles With Brake Lines/Rear Blocks/U-Bolts/Rear Fox Performance Shocks 6 Lug Wheel
  • Suspension Lift Kit w/Shocks; 4 in. Lift; Includes Front Spindles With Brake Lines/Rear Blocks/U-Bolts/Rear Fox Performance Shocks;
  • Suspension Lift Kit w/Shocks
  • Product Attributes:
    • Lift/Drop Height: 4 In.
  • Features:
    • Provide Additional Clearance For Your Vehicle
    • Allowing A Larger Tire Size
  • The Maxtrac Suspension 4-inch lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Fox 2.0 monotube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Drive Type CID
2006 - Toyota Tacoma V 3956 6 Cyl 4.0L Base RWD 241
Showing 1 - 10 of 48 products

Loading...