1978 Chevrolet C30 Moog Parts
Choose your Engine for your 1978 Chevrolet C30
Image
Product
Price
- Coil Spring Set
- with Dual Rear Wheels (DRW) Constant Rate Spring
- MOOG 6454 Coil Spring Set
- Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
- 13.61
- 345.70
- Wire Diameter:
- 0.82
- 21.00
- Front Spring Compressed Length:
- 10.00
- 254.00
- Rear Spring Compressed Length:
- 10.00
- 254.00
- Front Spring Outside Diameter: 5.340
- Front Spring Relaxed Length:
- 13.61
- 345.70
- Rear Spring Outside Diameter: 5.340
-
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1978 - Chevrolet C30 | V | - | Front | 8 Cyl 5.7L | 350 |
- Coil Spring Set
- with Single Rear Wheels (SRW) Constant Rate Spring
- MOOG 6454 Coil Spring Set
- Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
- 13.61
- 345.70
- Wire Diameter:
- 0.82
- 21.00
- Front Spring Compressed Length:
- 10.00
- 254.00
- Rear Spring Compressed Length:
- 10.00
- 254.00
- Front Spring Outside Diameter: 5.340
- Front Spring Relaxed Length:
- 13.61
- 345.70
- Rear Spring Outside Diameter: 5.340
-
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
This Part Fits the Following OEM/Substitute Numbers:
277-2074, 328098, 328099, 328100, 328101, 45H0076, 52049830, 585-1076, 630.66078, 831-6454, 92-6454, CS6454, FCS6454S, SMS6454, U6454P
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Body | CID |
|---|---|---|---|---|---|---|---|
| 1978 - Chevrolet C30 | V | - | Front | 4 | 8 Cyl 7.4L | Crew Cab Pickup | 454 |
- Coil Spring Set
- Heavy Duty with Single Rear Wheels (SRW) Constant Rate Spring
- MOOG 6454 Coil Spring Set
- Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
- 13.61
- 345.70
- Wire Diameter:
- 0.82
- 21.00
- Front Spring Compressed Length:
- 10.00
- 254.00
- Rear Spring Compressed Length:
- 10.00
- 254.00
- Front Spring Outside Diameter: 5.340
- Front Spring Relaxed Length:
- 13.61
- 345.70
- Rear Spring Outside Diameter: 5.340
-
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Body | CID |
|---|---|---|---|---|---|---|---|
| 1978 - Chevrolet C30 | L | - | Front | 2 | 6 Cyl 4.8L | Cab & Chassis | 292 |
- Stabilizer Bar Bushing Kit
- 1-1/4 (in) Sway Bar Diameter Standard Design without Bracket
- MOOG K6476 Stabilizer Bar Bushing Kit
- Product Attributes:
- Includes Dust Boots: No
- Quantity of Bushings: 2
- Bar Diameter (Inch): 1.250
- Includes Hardware: No
- Inner Diameter (Inch): 1.250
- Length (Inch): 1.450
- Meets/Exceeds OE Manufacturer Specs: Exceeds
- Part Description: Sway Bar Bushing
- Outer Diameter (Inch): 1.730
-
Features:
- PREMIUM MATERIALS -- Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - Chevrolet C30 | Front To Control Arm |
- Stabilizer Bar Bushing Kit
- 1-1/4 (in) Sway Bar Diameter Standard Design without Bracket
- MOOG K6476 Stabilizer Bar Bushing Kit
- Product Attributes:
- Includes Dust Boots: No
- Quantity of Bushings: 2
- Bar Diameter (Inch): 1.250
- Includes Hardware: No
- Inner Diameter (Inch): 1.250
- Length (Inch): 1.450
- Meets/Exceeds OE Manufacturer Specs: Exceeds
- Part Description: Sway Bar Bushing
- Outer Diameter (Inch): 1.730
-
Features:
- PREMIUM MATERIALS -- Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
04-86501, 14019009, 265-2150, 265-2650, 265-2651, 332954, 45G0628, 46G0628A, 486501, 535-789, 550-1128, 550-1128B, 602.66076, BB6476, E-6627-TU, E6627, FA7153, HB1418...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - Chevrolet C30 | Front To Frame |
- Tie Rod End Adjusting Sleeve
- 4.72 (in) Length with 11/16 (in) x 18 Threads
- MOOG ES2004S Tie Rod End Adjusting Sleeve
- Product Attributes:
- Length: 4.75
-
Features:
- Coated for corrosion resistance
- Engineered to meet or exceed OE Performance
- Wrench flats on housing and stud provide easy installation and alignment adjustment.
- Polished Stud ball provides low socket torque.
- Stud design is optimized to provide ideal stud swing and strength for each application.
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-84900, 0384900E, 0645217, 0928833, 12309226, 1474919, 1553703, 1634619, 26033090, 26048561, 26059034, 269-1109, 269-1113, 310252, 3200671, 3497704, 380013C01, 381484...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1978 - Chevrolet C30 |
- Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES409LT Tie Rod End
- Product Attributes:
- End 1 Gender: Male
- Greaseable: Yes
- End 2 Gender: Male
- Length - Stud Center to End: 8.858
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-86002, 0386002E, 14002550, 26059505, 269-2231, 310211, 378344, 386002, 3972488, 3986724, 401-1090, 401-1090B, 41083, 45A0090, 46A0090A, 52303478, 534-749, 612.66012...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - Chevrolet C30 | Inner |
- Tie Rod End
- MOOG ES409LT Tie Rod End
- Product Attributes:
- End 1 Gender: Male
- Greaseable: Yes
- End 2 Gender: Male
- Length - Stud Center to End: 8.858
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - Chevrolet C30 | Inner |
- Stabilizer Bar Bushing Kit
- 1-1/8 (in) Sway Bar Diameter without Bracket OE Type Standard Design
- MOOG K6408 Stabilizer Bar Bushing Kit
- Product Attributes:
- Includes Dust Boots: No
- Quantity of Bushings: 2
- Bar Diameter (Inch): 1.130
- Includes Hardware: No
- Inner Diameter (Inch): 1.130
- Length (Inch): 1.450
- Meets/Exceeds OE Manufacturer Specs: Exceeds
- Part Description: Sway Bar Bushing
- Outer Diameter (Inch): 1.750
-
Features:
- PREMIUM MATERIALS -- Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
04-86506, 14071381, 265-2153, 45G0631, 46G0631A, 486506, 539-044, 550-1131B, 550113-1, 602.66027, BB6408, E-6621-TU, E6621, FA7156, FB7156, HB1429, JBU1101, K6408...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - Chevrolet C30 | Front To Frame |
- Stabilizer Bar Bushing Kit
- 1-1/8 (in) Sway Bar Diameter without Bracket OE Type Standard Design
- MOOG K6408 Stabilizer Bar Bushing Kit
- Product Attributes:
- Includes Dust Boots: No
- Quantity of Bushings: 2
- Bar Diameter (Inch): 1.130
- Includes Hardware: No
- Inner Diameter (Inch): 1.130
- Length (Inch): 1.450
- Meets/Exceeds OE Manufacturer Specs: Exceeds
- Part Description: Sway Bar Bushing
- Outer Diameter (Inch): 1.750
-
Features:
- PREMIUM MATERIALS -- Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - Chevrolet C30 | Front To Control Arm |
Showing 1 - 10 of 50 products
Loading...