Image
Product
Price
- Coil Spring Set
- Except 4.1 Gear Ratio Except 4.56 Gear Ratio Except Heavy Duty Except GM Brake Code JD7 Constant Rate Spring
- MOOG 6454 Coil Spring Set
- Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
- 13.61
- 345.70
- Wire Diameter:
- 0.82
- 21.00
- Front Spring Compressed Length:
- 10.00
- 254.00
- Rear Spring Compressed Length:
- 10.00
- 254.00
- Front Spring Outside Diameter: 5.340
- Front Spring Relaxed Length:
- 13.61
- 345.70
- Rear Spring Outside Diameter: 5.340
-
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
This Part Fits the Following OEM/Substitute Numbers:
277-2074, 328098, 328099, 328100, 328101, 45H0076, 52049830, 585-1076, 630.66078, 831-6454, 92-6454, CS6454, FCS6454S, SMS6454, U6454P
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 1986 - Chevrolet G30 | Front | GAS |
- Coil Spring Set
- Except GM Brake Code JB8 Constant Rate Spring
- MOOG 6454 Coil Spring Set
- Product Attributes:
- Spring Color: Black
- Rear Spring Relaxed Length:
- 13.61
- 345.70
- Wire Diameter:
- 0.82
- 21.00
- Front Spring Compressed Length:
- 10.00
- 254.00
- Rear Spring Compressed Length:
- 10.00
- 254.00
- Front Spring Outside Diameter: 5.340
- Front Spring Relaxed Length:
- 13.61
- 345.70
- Rear Spring Outside Diameter: 5.340
-
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 1986 - Chevrolet G30 | Front | DIESEL |
- Stabilizer Bar Bushing Kit
- OE Type Standard Design
- MOOG K6169 Stabilizer Bar Bushing Kit
- Product Attributes:
- Includes Dust Boots: No
- Quantity of Bushings: 2
- Bar Diameter (Inch): 1.060
- Includes Hardware: No
- Inner Diameter (Inch): 1.060
- Length (Inch): 1.380
- Meets/Exceeds OE Manufacturer Specs: Exceeds
- Part Description: Sway Bar Bushing
- Outer Diameter (Inch): 1.770
-
Features:
- PREMIUM MATERIALS -- Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
04-86500, 11176, 265-1377, 265-1979, 265-2175, 265-2178, 320110, 3927019, 45G0527, 45G0653, 46G0527A, 486500, 531-464, 550-1027, 550-1027B, 550115-3, 602.66023, 8-03927-019-0...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Chevrolet G30 | Front To Frame |
- Greaseable Super Strength Universal Joint
- Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 235 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.125
- 28.6
- Bearing Diameter A - mm: 28.5
- Length Axis 1:
- 2.557
- 64.9
- Length Axis 2:
- 2.557
- 64.9
- Length A - Inch: 2.557
- OE Series: Mechanics 3, Saginaw 44 And American Axle 1344
- Length A - mm: 64.9
- Bearing Diameter A - Inch: 1.125
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.125
- 28.5
- Bearing Diameter B - Inch: 1.125
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.557
- Length B - mm: 64.9
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 28.6
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2157105, 45U0110
Additional Fitment Information:
| Vehicle | Trans Type | Transmission | Position | Trans. Speed | Wheel FeedBase |
|---|---|---|---|---|---|
| 1986 - Chevrolet G30 | Transmission | Automatic | At Transmission | 3 | 125.0 |
- Greaseable Super Strength Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 232 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
114578B, 2154178, 45U0109
Additional Fitment Information:
| Vehicle | Position | Wheel FeedBase |
|---|---|---|
| 1986 - Chevrolet G30 | At Center Bearing | 125.0 |
- Greaseable Premium Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium
- MOOG Greaseable Premium 331 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
114-10HD, 114-10HP, 114-578, 114-578R, 114-578U, 12471503, 12476231, 12547189, 14067677, 15583283, 15634970, 178, 2-0053, 20053, 20054, 20140, 20190, 20194...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Wheel FeedBase |
|---|---|---|
| 1986 - Chevrolet G30 | At Center Bearing | 125.0 |
- Universal Joint Strap Kit
- Uses 5/16 (in) x 3/4 (in) Cap Screws on 1.81 (in) Bolt Centers
- MOOG 331-10 U-joint Clamp Kit
-
Features:
- For U-Joints 330 & 331
- Contains two 1.81" bolt center clamps and four 5/16-24 x 3/4" cap screws
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
This Part Fits the Following OEM/Substitute Numbers:
1-0019, 10019, 260-0160, 3-70-28X, 45U0502, U9703
Additional Fitment Information:
| Vehicle | Position | Wheel FeedBase |
|---|---|---|
| 1986 - Chevrolet G30 | Rear | 146.0 |
- Tie Rod End Adjusting Sleeve
- 4.72 (in) Length with 11/16 (in) x 18 Threads
- MOOG ES2004S Tie Rod End Adjusting Sleeve
- Product Attributes:
- Length: 4.75
-
Features:
- Coated for corrosion resistance
- Engineered to meet or exceed OE Performance
- Wrench flats on housing and stud provide easy installation and alignment adjustment.
- Polished Stud ball provides low socket torque.
- Stud design is optimized to provide ideal stud swing and strength for each application.
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-84900, 0384900E, 0645217, 0928833, 12309226, 1474919, 1553703, 1634619, 26033090, 26048561, 26059034, 269-1109, 269-1113, 310252, 3200671, 3497704, 380013C01, 381484...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Chevrolet G30 |
- Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES409LT Tie Rod End
- Product Attributes:
- End 1 Gender: Male
- Greaseable: Yes
- End 2 Gender: Male
- Length - Stud Center to End: 8.858
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-86002, 0386002E, 14002550, 26059505, 269-2231, 310211, 378344, 386002, 3972488, 3986724, 401-1090, 401-1090B, 41083, 45A0090, 46A0090A, 52303478, 534-749, 612.66012...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Chevrolet G30 | Inner |
- Tie Rod End
- MOOG ES409LT Tie Rod End
- Product Attributes:
- End 1 Gender: Male
- Greaseable: Yes
- End 2 Gender: Male
- Length - Stud Center to End: 8.858
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Chevrolet G30 | Inner |
Showing 1 - 10 of 29 products
Loading...