Image
Product
Price
- Ball Joint
- MOOG K8195T Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1990 - Chevrolet Blazer | Front Lower |
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K8195T Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-88001, 02-88004, 0288001E, 10247PA, 10253, 10253HD, 1253K, 14039008, 260-1106, 260-1342, 260-1342FT, 260-1364, 2601342FT, 288001, 288004, 305113, 31027, 3633950...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1990 - Chevrolet Blazer | Front Lower |
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K8194T Ball Joint
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-88000, 02-88003, 0288000E, 10246PA, 10252, 10252HD, 10252PA, 1252K, 14032427, 14039008, 260-1105, 260-1343, 260-1343FT, 260-1365, 2601343FT, 288000, 288003, 305112...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1990 - Chevrolet Blazer | Front Upper |
- Ball Joint
- MOOG K8194T Ball Joint
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1990 - Chevrolet Blazer | Front Upper |
- Non-Greaseable Super Strength Universal Joint
- Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 234 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.125
- 28.6
- Bearing Diameter A - mm: 28.5
- Length Axis 1:
- 2.557
- 64.9
- Length Axis 2:
- 2.557
- 64.9
- Length A - Inch: 2.557
- OE Series: Mechanics 3, Saginaw 44 And American Axle 1344
- Length A - mm: 64.9
- Bearing Diameter A - Inch: 1.125
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.125
- 28.5
- Bearing Diameter B - Inch: 1.125
- Bearing Type A: Round Grooved
- Greaseable: No
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.557
- Length B - mm: 64.9
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 28.6
- Lubricateable: No
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2-3011BF, 20040P, 23011G, 45U0136, U3147HP
Additional Fitment Information:
| Vehicle | Trans Type | Transmission | Position | Trans. Speed | Drive Type |
|---|---|---|---|---|---|
| 1990 - Chevrolet Blazer | Transmission | Automatic | Rear Driveshaft at Rear Axle | 3 | 4WD |
- Greaseable Super Strength Universal Joint
- Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 235 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.125
- 28.6
- Bearing Diameter A - mm: 28.5
- Length Axis 1:
- 2.557
- 64.9
- Length Axis 2:
- 2.557
- 64.9
- Length A - Inch: 2.557
- OE Series: Mechanics 3, Saginaw 44 And American Axle 1344
- Length A - mm: 64.9
- Bearing Diameter A - Inch: 1.125
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.125
- 28.5
- Bearing Diameter B - Inch: 1.125
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.557
- Length B - mm: 64.9
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 28.6
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2157105, 45U0110
Additional Fitment Information:
| Vehicle | Trans Type | Transmission | Position | Trans. Speed | Drive Type |
|---|---|---|---|---|---|
| 1990 - Chevrolet Blazer | Transmission | Automatic | Rear Driveshaft at Transmission | 3 | 4WD |
- Non-Greaseable Super Strength Universal Joint
- with Lube Fitting in Body Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 269 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-0153BF, 10153G, 20049P, 45U0145, 5-529X, 529, DT467, G5-467X, U153HP
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1990 - Chevrolet Blazer | Front Driveshaft at Front Axle | 4WD |
- Tie Rod End Adjusting Sleeve
- MOOG ES362S Tie Rod End Adjusting Sleeve
- Product Attributes:
- Length: 4.5
-
Features:
- Coated for corrosion resistance
- Alloy steel construction provides durability
- Includes any necessary hardware
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-88901, 0388901E, 14007644, 15617288, 269-1105, 269-1120, 269-1128, 310180, 3735346, 3735347, 388901, 4112842, 4112843, 41137, 425-1002, 425-1002B, 45A6002, 46A6002A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1990 - Chevrolet Blazer | Pitman Arm To Steering Arm |
- Non-Greaseable Super Strength Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 231 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2-0053BF, 20053G, 20054P, 210-0447, 282, 45U0123, 5-282X, 5-471X, DT447, G5-447X, U178HP
Additional Fitment Information:
| Vehicle | Trans Type | Transmission | Position | Trans. Speed | Drive Type |
|---|---|---|---|---|---|
| 1990 - Chevrolet Blazer | Transmission | Manual | Rear Driveshaft at Transmission | 4 | 4WD |
- Non-Greaseable Super Strength Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 231 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Trans Type | Transmission | Position | Trans. Speed | Drive Type |
|---|---|---|---|---|---|
| 1990 - Chevrolet Blazer | Transmission | Manual | Rear Driveshaft at Rear Axle | 4 | 4WD |
Showing 1 - 10 of 45 products
Loading...