2016 GMC Yukon Moog Parts

Choose your Engine for your 2016 GMC Yukon


Showing 1 - 10 of 57 products
Image
SKU
Product
Rating
Price

Moog
  • Ball Joint
  • 4.150 (in) Length Cast Iron Arm without Aluminum Steering Knuckles
  • MOOG K6541 Ball Joint
  • Product Attributes:
    • Cotter Pin Hole: Yes
    • Adjustable: No
    • Suspension Grade Type: Standard
    • Maximum Outside Diameter: 2.360
    • Mounting Hole Quantity: 0
    • Castle Nut Included: Yes
    • Mounting Type: Press-in
    • Greaseable: Yes
  • Features:
    • PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
    • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
    • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
    • KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
    • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
    • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
  • Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position
2016 - GMC Yukon Front Lower

Moog
  • Ball Joint
  • 4.150 (in) Length Cast Iron Arm Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation without Aluminum Steering Knuckles
  • MOOG K6541 Ball Joint
  • Product Attributes:
    • Cotter Pin Hole: Yes
    • Adjustable: No
    • Suspension Grade Type: Standard
    • Maximum Outside Diameter: 2.360
    • Mounting Hole Quantity: 0
    • Castle Nut Included: Yes
    • Mounting Type: Press-in
    • Greaseable: Yes
  • Features:
    • PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
    • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
    • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
    • KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
    • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
    • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
  • Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
104267, 104327, 12472819, 12475478, 15245582, 15922557, 19209396, 20869199, 20869200, 260-1528, 45D2272, 46D2272A, 505-1272, 505-1272B, 533-015, 610.66017, B6541, BJ91255...VIEW MORE

Additional Fitment Information:
Vehicle Position
2016 - GMC Yukon Front Lower

Moog
  • Caster/Camber Adjusting Kit
  • Camber / Caster Plus or Minus 1.5 Degrees Non-Greasable with Bolts & Cams
  • MOOG K100026 Caster/Camber Adjusting Kit
  • Features:
    • Can bring vehicles back to factory specification
    • Can solve excessive tire wear and steering issues
    • Shims and bushings provide precise camber, caster and toe adjustments
    • Incorporates proven design and engineering features
    • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
  • By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

This Part Fits the Following OEM/Substitute Numbers:
13100026, 2643717, 4182512, 45K5012, 545510, 611-1211, AA3717, AE123451, AK90269, VV100026

Additional Fitment Information:
Vehicle Position
2016 - GMC Yukon Front

Moog
  • Stabilizer Bar Link
  • Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
  • MOOG K6700 Stabilizer Bar Link
  • Product Attributes:
    • Bolt Length:
      • 225.0
      • 8.868
    • Bushing Material: Rubber
    • Greaseable: Yes
  • Features:
    • EASY TO INSTALL -- Wrench flats ensure easy installation and removal
    • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
    • KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
    • STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
    • PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
10386415, 15039569, 15257472, 18391, 265-1634, 41038, 45G0425, 46G0425A, 5206 0011AB, 52060011AB, 535-834, 545-1425B, 5451425, 606.66021, 60766021, JTS738, K6700, MK6700...VIEW MORE

Additional Fitment Information:
Vehicle Position
2016 - GMC Yukon Rear

Moog
  • Stabilizer Bar Link
  • MOOG K6700 Stabilizer Bar Link
  • Product Attributes:
    • Bolt Length:
      • 225.0
      • 8.868
    • Bushing Material: Rubber
    • Greaseable: Yes
  • Features:
    • EASY TO INSTALL -- Wrench flats ensure easy installation and removal
    • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
    • KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
    • STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
    • PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position
2016 - GMC Yukon Rear

Moog
  • Coil Spring Set
  • without Electronic Dampening Control Suspension without Trailering Package Constant Rate Spring
  • MOOG 81069 Coil Spring Set
  • Product Attributes:
    • Spring Color: Black
    • Rear Spring Relaxed Length: 17.177
    • Wire Diameter: 0.64
    • Front Spring Compressed Length: 5.266
    • Rear Spring Compressed Length: 5.266
    • Front Spring Outside Diameter: 5.710
    • Front Spring Relaxed Length: 17.177
    • Rear Spring Outside Diameter: 5.710
  • Features:
    • 100% Load tested
    • Easy to install
    • Provides like-new steering
    • Designed to lower stresses for longer service life
    • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
  • By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

This Part Fits the Following OEM/Substitute Numbers:
15182559, 15182561, 1582944322675760, 25783733, 277-3522, 45H2164, 589-1144, 630.66140, CS81069, RCS20637S, SMS81069

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2016 - GMC Yukon V 5328 Rear 8 Cyl 5.3L 325

Moog
  • Tie Rod End
  • Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
  • MOOG EV800938 Tie Rod End
  • Product Attributes:
    • End 2 Gender: Male
  • Features:
    • ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
    • PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
    • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
    • EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
  • Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
22834082, 580-321, MS50770

Additional Fitment Information:
Vehicle Position
2016 - GMC Yukon Inner

Moog
  • Stabilizer Bar Bushing Kit
  • 36 (mm) Sway Bar Diameter Standard Design
  • MOOG K200222 Stabilizer Bar Bushing Kit
  • Product Attributes:
    • Includes Dust Boots: No
    • Quantity of Bushings: 2
    • Bar Diameter (Inch): 1.420
    • Includes Hardware: No
    • Inner Diameter (Inch): 1.420
    • Base to Centerline (Inch): 1.120
    • Base to Centerline (mm): 43.8
    • Length (Inch): 1.470
    • Meets/Exceeds OE Manufacturer Specs: Exceeds
    • Part Description: Sway Bar Bushing
    • Outer Diameter (Inch): 1.760
  • Features:
    • PREMIUM MATERIALS -- Made from high-quality natural rubber material for durability and ride performance
    • EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
    • HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
  • Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

This Part Fits the Following OEM/Substitute Numbers:
15124516, 15135385, 2652748, 45G1673, 531-608, 550-1673, 602.66109, BSK90209, HB200222, JBU1285, MS508140, MS50868, MS50869

Additional Fitment Information:
Vehicle Position
2016 - GMC Yukon Front To Frame

Moog
  • Stabilizer Bar Bushing Kit
  • OE Type Standard Design
  • MOOG K6408 Stabilizer Bar Bushing Kit
  • Product Attributes:
    • Includes Dust Boots: No
    • Quantity of Bushings: 2
    • Bar Diameter (Inch): 1.130
    • Includes Hardware: No
    • Inner Diameter (Inch): 1.130
    • Length (Inch): 1.450
    • Meets/Exceeds OE Manufacturer Specs: Exceeds
    • Part Description: Sway Bar Bushing
    • Outer Diameter (Inch): 1.750
  • Features:
    • PREMIUM MATERIALS -- Made from high-quality natural rubber material for durability and ride performance
    • EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
    • HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
  • Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

This Part Fits the Following OEM/Substitute Numbers:
04-86506, 14071381, 265-2153, 45G0631, 46G0631A, 486506, 539-044, 550-1131B, 550113-1, 602.66027, BB6408, E-6621-TU, E6621, FA7156, FB7156, HB1429, JBU1101, K6408...VIEW MORE

Additional Fitment Information:
Vehicle Position
2016 - GMC Yukon Rear To Frame

Moog
  • Tie Rod End
  • Design Allows Easier Installation
  • MOOG ES800948 Tie Rod End
  • Product Attributes:
    • End 2 Thread Pitch: 2.0
    • Dust Boot Included: Yes
    • End 2 Thread Diameter: 14.0
    • End 1 Thread Direction: Clockwise
    • End 2 Thread Direction: Clockwise
    • End 1 Gender: Female
    • Greaseable: Yes
    • End 1 Thread Diameter: 16.0
    • End 1 Thread Pitch: 1.5
    • End 2 Gender: Female
    • Length - Stud Center to End: 5.510
  • Features:
    • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
    • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
    • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
    • PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
    • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
    • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
22868912, 2693900, 2695692, 4012563, 4051274, 45A10036, 45A2563, MS50630

Additional Fitment Information:
Vehicle Position
2016 - GMC Yukon Outer
Showing 1 - 10 of 57 products

Loading...