1967 Chevrolet K20 Panel Proform Parts
Choose your Engine for your 1967 Chevrolet K20 Panel
Image
Product
Price
- For SB Chevy
- For SB Chevy; Mounting Bolt(s) Included:Yes; Valve Cover Height:Tall; Emblem:CHEVROLET and Bowtie Emblem; Finish:Black Crinkle; Material:Stamped Steel
- Sold As One Complete Kit
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Valve Cover Height: Tall
- Category: Engine Dress-up Kit
- PCV Grommet Included: Yes
- Feature/Benefit: Black Crinkle Valve Covers, With Their Distinctive Look And Boldly Striking Bowtie And Chevrolet Emblems, Inlaid With Classic Chevrolet Red, Are Ced Painted For Long-term Corrosion Resistance, And Then Black Crinkle Painted On The Outer Surface.
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Engine: Chevy Sb Gen 1
- Mounting Bolt(s) Included: Yes
- Make: Chevrolet
- Material: Stamped Steel
- Finish: Black Crinkle
- Black crinkle valve covers, with their distinctive look and boldly striking Bowtie and CHEVROLET Emblems, inlaid with classic Chevrolet red, are CED painted for long-term corrosion resistance, and then black crinkle painted on the outer surface. Includes a pair of tall baffled Bowtie valve covers (141-751), a 14in classic bowtie air cleaner kit (141-752), a bowtie timing chain cover (141-753), eight bowtie valve cover wing nuts (141-756, two packages), eight bowtie valve cover hold-down clamps (141-757, two packages), and a matching bowtie push-in valve cover breather cap (141-754).
-
Suggested Purchase Quantity: 21
- Most jobs typically require 21 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet K20 Panel | V | - | 8 Cyl 4.6L | 283 |
- 12 Pcs
- Hex Head; 3/8 dia. X 1in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 1 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet K20 Panel | V | - | 8 Cyl 4.6L | 283 |
- Includes Tube and Dipstick
- Locking Includes Tube and Dipstick THM350
- Sold as One Kit
- Product Attributes:
- Handle Color: Black
- Feature/Benefit: ...because Nhra Says So.
- Part Type: Transmission Dipstick
- Style: Locking
- Tube Included: Yes
- Dipstick Location: Passenger Side
- Tube Length: 14
- Mounting Hole Quantity: 1
- Make: Gm
- Finish: Black
- Transmission Type: Turbo 350
- Adjustable: No
- Category: Transmission
- Outside Diameter: 125
- Applications: Gm Th350 Transmission
- Material: Steel
- ...because NHRA says so. No more tranny blowouts and fluid on the track with this affordable locking trans dipstick. Gold iridite finish. Computer formed for precise fit.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1967 - Chevrolet K20 Panel |
- 12 Pcs
- Hex Head 3/8 dia. X 3/4in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac '79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8" bolts
- Product Attributes:
- Bolt Grade: 8
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- Thread Type: Fine
- Head Drive Type: Hex
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet K20 Panel | V | - | 8 Cyl 4.6L | 283 |
- SB Chevy
- Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Satin
- Sold Each
- Product Attributes:
- Rotation: Standard
- Category: Mech. Water Pump
- Feature/Benefit: Lightweight Aluminum
- Length: Short
- Applications: Chevy Small Block Engines
- Flow Rate: 25 Gpm
- Part Type: Water Pump
- Tool Type: Piston Installation Tools
- Make: Chevrolet
- Material: Aluminum
- Finish: Satin
- PROFORM's new high flow mechanical water pumps feature heavy duty ball bearings for up to 40% more coolant flow giving you real performance value for your dollar. Aluminum construction reduces front end weight!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet K20 Panel | V | - | 8 Cyl 4.6L | 283 |
- Wedge-Locking Header Bolts
- Hex Head; 3/8-16 Thread X 3/4 in Black Oxide
- Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Part Type: Header Bolts
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet K20 Panel | V | - | 8 Cyl 4.6L | 283 |
- 12 Pcs
- Hex Head; 3/8 dia. X 3/4in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac '79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8" bolts
- Product Attributes:
- Bolt Grade: 8
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- Thread Type: Fine
- Head Drive Type: Hex
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet K20 Panel | V | - | 8 Cyl 4.6L | 283 |
- Includes Tube and Dipstick
- Locking; Includes Tube and Dipstick; THM400
- Sold as One Kit
- Product Attributes:
- Transmission Type: Turbo 400
- Category: Transmission
- Feature/Benefit: ...because Nhra Says So.
- Applications: Gm Th400 Transmission
- Part Type: Transmission Dipstick
- Style: Locking
- Dipstick Location: Passenger Side
- Make: Gm
- Material: Steel
- Finish: Black
- ...because NHRA says so. No more tranny blowouts and fluid on the track with this affordable locking trans dipstick. Black finish. Computer formed for precise fit.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1967 - Chevrolet K20 Panel |
- Includes Tube and Dipstick
- Locking; Includes Tube and Dipstick; THM350
- Sold as One Kit
- Product Attributes:
- Handle Color: Black
- Feature/Benefit: ...because Nhra Says So.
- Part Type: Transmission Dipstick
- Style: Locking
- Tube Included: Yes
- Dipstick Location: Passenger Side
- Tube Length: 14
- Mounting Hole Quantity: 1
- Make: Gm
- Finish: Black
- Transmission Type: Turbo 350
- Adjustable: No
- Category: Transmission
- Outside Diameter: 125
- Applications: Gm Th350 Transmission
- Material: Steel
- ...because NHRA says so. No more tranny blowouts and fluid on the track with this affordable locking trans dipstick. Gold iridite finish. Computer formed for precise fit.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1967 - Chevrolet K20 Panel |
- Fits SB Block Chevy Engines
- Fits SB Block Chevy Engines; Mounting Bolt(s) Included:Yes; Valve Cover Height:Tall;Emblem:CHEVROLET and Bowtie Emblem; Finish:Chrome; Material:Stamped Steel
- Sold As One Kit
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- PCV Grommet Included: Yes
- Feature/Benefit: Brilliant Chrome Finish With Red Inchbowtie Inch Logo And Black Inchchevrolet Inch Lettering.
- Engine: Chevy Sb Gen 1
- Make: Chevrolet
- Finish: Chrome
- Valve Cover Height: Tall
- Category: Engine Dress-up Kit
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: Yes
- Material: Stamped Steel
- This engine dress-up kit features a great looking chrome finish with red "Bowtie" logos and black "Chevrolet" lettering. Made from high quality steel material. Designed to fit Small Block Chevy engines 1955 to 1986. Kit includes a pair of tall baffled engine valve covers, one 14 inch diameter carburetor air cleaner, one engine timing chain cover, 8 valve cover wing nuts, 8 valve cover hold downs, one push-in valve cover breather and two valve cover grommets (1 regular and 1 PCV). This is an officially licensed GM Performance Parts product. Sold as one complete kit. Backed by a limited 30 day factory warranty.
-
Suggested Purchase Quantity: 22
- Most jobs typically require 22 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1967 - Chevrolet K20 Panel | V | - | 8 Cyl 4.6L | 283 |
Showing 1 - 10 of 18 products
Loading...