Image
Product
Price
- Wedge-Locking Header Bolts
- Hex Head; 3/8-16 Thread X 3/4 in Black Oxide
- Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 3/4 Inch Long; Black Oxide Finish; 16 Pcs in kit; Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Part Type: Header Bolts
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Chevrolet P20 Van | V | - | 8 Cyl 5.0L | 307 |
- Transmission Dipstick Kit; Locking; GM TH350 Trans; Includes Tube and Dipstick
- Locking; Includes Tube and Dipstick; THM350
- Transmission Dipstick Kit; Locking; Black CED Finish; Fits GM TH350 Transmissions; Includes Tube and Dipstick; Made from High-Quality Steel Material; Sold as One Kit
- Product Attributes:
- Transmission Type: Turbo 350
- Category: Transmission
- Feature/Benefit: ...because Nhra Says So.
- Applications: Gm Th350 Transmission
- Part Type: Transmission Dipstick
- Style: Locking
- Dipstick Location: Passenger Side
- Make: Gm
- ...because NHRA says so. No more tranny blowouts and fluid on the track with this affordable locking trans dipstick. Gold iridite finish. Computer formed for precise fit.
Additional Fitment Information:
| Vehicle |
|---|
| 1968 - Chevrolet P20 Van |
- High-Torque Starter; Gear Reduction Type; 2.2KW; Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 2.2KW; Compression Ratio:15 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- High-Torque Mini Starter; Gear Reduction Type; 2.2KW; Fits All Chevy V8-V6 Engines; Billet Aluminum Mount; For 15.1:1 Compression Ratio Engines; 100% New Components; Offset Design for More Oil Pan Clearance; Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Category: Starters
- Power Output: 2.2 Kilo Watts
- Feature/Benefit: High-torque, Gear-reduction Design.
- Applications: Chevy V6 Engines, Chevy Small Block Engines And Chevy Big Block Engines
- Compression Ratio: 15 : 1
- Mounting Plate: Straight Bolt Mounting Plate
- Part Type: Starter Motor
- Flywheel Tooth Number: 153 & 168-tooth
- Make: Chevrolet
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1968 - Chevrolet P20 Van | V | - | 8 Cyl 5.0L | Base | E | Naturally Aspirated | 307 |
- Transmission Dipstick Kit; Locking; GM TH400 Trans; Includes Tube and Dipstick
- Locking; Includes Tube and Dipstick; THM400
- Transmission Dipstick Kit; Locking; Black Finish; Fits GM TH400 Transmissions; Includes Tube and Dipstick; Made from High-Quality Steel Material; Sold as One Kit
- Product Attributes:
- Transmission Type: Turbo 400
- Category: Transmission
- Feature/Benefit: ...because Nhra Says So.
- Applications: Gm Th400 Transmission
- Part Type: Transmission Dipstick
- Style: Locking
- Dipstick Location: Passenger Side
- Make: Gm
- ...because NHRA says so. No more tranny blowouts and fluid on the track with this affordable locking trans dipstick. Black finish. Computer formed for precise fit.
Additional Fitment Information:
| Vehicle |
|---|
| 1968 - Chevrolet P20 Van |
- High-Torque Starter; Gear Reduction Type; 1.4KW; Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 1.4KW; Compression Ratio:11 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- High-Torque Mini Starter; Gear Reduction Type; 1.4KW; Fits All Chevy V8 Engines; Billet Aluminum Mount; For 11.1:1 Compression Ratio Engines; 100% New Components; Offset Design for More Oil Pan Clearance; Black and Silver Finish; Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Category: Starters
- Power Output: 1.4 Kw
- Feature/Benefit: High-torque, Gear-reduction Design.
- Applications: Chevy Small Block Engines, Chevy Big Block Engines And Chevy V6 Engines
- Compression Ratio: 11 : 1
- Mounting Plate: Straight Bolt Mounting Plate
- Part Type: Starter Motor
- Flywheel Tooth Number: 153 & 168-tooth
- Make: Chevrolet
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations. Fits all Chevy V6 and small and big block V 8 engines using 153 or 168 tooth flywheels. Heavy-duty PROFORM P/N 66258 weighs 1-1/2 lbs. more and is 1" longer than P/N 66256.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1968 - Chevrolet P20 Van | V | - | 8 Cyl 5.0L | Base | E | Naturally Aspirated | 307 |
- Electric Engine Water Pump; Aluminum; Black Powder Coat; Fits SB Chevy Engines
- Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Black
- Electric Engine Water Pump; Fits Small Block Chevy Engines; Made From High-Quality Die Cast Aluminum; Black Powder Coat Finish; Flows 35 GPM; Billet 1.0 Inch NPT to 1-3/4 Inch Hose Fitting Included; Sold Individually
- Product Attributes:
- Rotation: Standard
- Category: Water Pumps
- Feature/Benefit: Affordable Electric Water Pumps Eliminate Unnecessary Weight And Impeller Drag Experienced At High Rpm.
- Length: 6.5 Inch
- Applications: Chevy Small Block Engines
- Engine: Chevy Sb Gen 1
- Flow Rate: 35 Gpm
- Part Type: Water Pump
- Pump Flow: 35 Gpm
- Condition: New
- Make: Chevrolet
- Ever consider going electric? PROFORM's affordable electric water pumps eliminate unnecessary weight and impeller drag experienced at high RPM, pumps up to 35+ gallons of water per minute, and delivers the cooling that can make the difference between a win and second place! Durable but light-weight die-cast aluminum, epoxy powder coated for corrosion resistance in the color of your choice. Race or street. Comes with mating weather-tight connector. Draws 6 amps. Billet fitting (1in pipe to 1 3/hose) included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1968 - Chevrolet P20 Van | V | - | 8 Cyl 5.0L | Base | E | Naturally Aspirated | 307 |
- Engine Water Pump; Mechanical Long Style; High Flow Model; Polished; SB Chevy
- Mechanical Long Style; High Flow Model;SB Chevy; Finish:Polished
- Engine Water Pump; Fits Small Block Chevy Engines; High-Flow Model; Mechanical Type; Long Style Pump; Made from High-Quality Aluminum; Polished Finish; Heavy-Duty Ball Bearings; Sold Each
- Product Attributes:
- Rotation: Standard
- Category: Water Pumps
- Feature/Benefit: High Flow Mechanical Water Pump.
- Length: Long
- Applications: Chevy Small Block Engines
- Flow Rate: 25 Gpm
- Part Type: Water Pump
- Pump Flow: 25 Gpm
- Condition: New
- Make: Chevrolet
- PROFORM's new high flow mechanical water pumps feature heavy duty ball bearings for up to 40% more coolant flow giving you real performance value for your dollar.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1968 - Chevrolet P20 Van | V | - | 8 Cyl 5.0L | Base | E | Naturally Aspirated | 307 |
- Engine Water Pump; Mechanical Short Style; High Flow Model; Satin; SB Chevy
- Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Satin
- Engine Water Pump; Fits Small Block Chevy Engines; High-Flow Model; Mechanical Type; Short Style Pump; Made from High-Quality Aluminum; Satin Finish; Heavy-Duty Ball Bearings; Sold Each
- Product Attributes:
- Rotation: Standard
- Category: Mech. Water Pump
- Feature/Benefit: Lightweight Aluminum
- Length: Short
- Applications: Chevy Small Block Engines
- Flow Rate: 25 Gpm
- Part Type: Water Pump
- Tool Type: Piston Installation Tools
- Make: Chevrolet
- PROFORM's new high flow mechanical water pumps feature heavy duty ball bearings for up to 40% more coolant flow giving you real performance value for your dollar. Aluminum construction reduces front end weight!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1968 - Chevrolet P20 Van | V | - | 8 Cyl 5.0L | 307 |
- High-Torque Starter; Gear Reduction Type; High Compression; Chevy V8; 168 Tooth
- High-Torque Starter; High Compression; Compression Ratio:14 : 1; Finish:Natural; Flywheel Tooth Number:168-Tooth; Gear Reduction Ratio:4.41:1; Material:Aluminum/Steel; Mounting Plate:Staggered Bolt Mounting Plate; Power Output:1.9 Kilo Watts
- High-Torque Mini Starter; Gear Reduction Type; High Compression Racing Staggered Style; Fits All Chevy V8 Engines with 168 Tooth Flywheel; Staggered Mount; For 14:1 Compression Ratio; 100% New; Offset For Pan Clearance; Natural Finish
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 4.41:1
- Category: Starters
- Power Output: 1.9 Kilo Watts
- Feature/Benefit: For Engines With Monster Cubic Inches Or Compression Ratios, These 100% New Starters Challenge The Specifications, Durability, And Reliability Of Anything On The Market.
- Applications: Chevy Small Block Engines And Chevy Big Block Engines
- Compression Ratio: 14 : 1
- Mounting Plate: Staggered Bolt Mounting Plate
- Part Type: Starter Motor
- Flywheel Tooth Number: 168-tooth
- Make: Chevrolet
- For engines with monster cubic inches or compression ratios, these 100% NEW starters challenge the specifications, durability, and reliability of anything on the market. Built from scratch with all-new components, the torque rating is a healthy 4.41:1 gear reduction, capable of cranking engines up to a whopping 14:1 compression. Comes in the NEW Race Box Packaging! Fits Chevy small and big block engines. Fits Chevy V8.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1968 - Chevrolet P20 Van | V | - | 8 Cyl 5.0L | Base | 307 |
- Engine Valve Covers; Stamped Steel; Short; Chrome; with Bowtie Logo; Fits SB Chevy
- Short; Fits SB Chevy; Mounting Bolt(s) Included:No; Emblem:CHEVROLET and Bowtie Emblem; Valve Cover Bolt Pattern:Perimeter Bolt; Valve Cover Height:Stock; Finish:Chrome; Material:Stamped Steel
- Engine Valve Cover; Stamped Steel Short Style With Baffles; Chrome Plated Finish With Chevy and Bowtie Logos; Fits 1955 to 1986 262-400 Small Block Chevy Engines; Made From Quality Material; Officially Licensed GM Product; Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- PCV Grommet Included: Yes
- Feature/Benefit: Engine Valve Covers Feature The Inchchevrolet Inch And Inchbowtie Inch Logos.
- Engine: Chevy Sb Gen 1
- Part Type: Valve Cover
- Breather Grommet Included: Yes
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Valve Cover Height: Stock
- Baffeled: Yes
- Category: Valve Covers
- Applications: Chevy Small Block 262 To 400 Engines 1958 To 1986
- Emblem Style: Embossed Emblem
- Mounting Bolt(s) Included: No
- These engine valve covers are manufactured from high quality stamped steel material. They are a short style valve cover and feature oil breather baffles. The valve covers have a great looking and long lasting chrome plated finish that also includes the "Chevrolet" and "Bowtie" logos. Designed to fit 1955 to 1986 262-400 Small Block Chevy engines. This an officially licensed GM Performance Parts product. Sold as one pair. Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1968 - Chevrolet P20 Van | V | - | 8 Cyl 5.0L | Base | E | Naturally Aspirated | 307 |
Showing 1 - 10 of 27 products
Loading...