Image
Product
Price
- Wedge-Locking Header Bolts; Hex Head; 3/8 dia. X 1in Black Oxide ; 12 Pcs
- Hex Head; 3/8 dia. X 1in Black Oxide
- Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 1 Inch Long; Black Oxide Finish; 12 Pcs in kit; Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 1 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Chevrolet Blazer | V | 5031 | 8 Cyl 5.0L | 307 |
- Wedge-Locking Header Bolts
- Hex Head; 3/8-16 Thread X 3/4 in Black Oxide
- Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 3/4 Inch Long; Black Oxide Finish; 16 Pcs in kit; Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Part Type: Header Bolts
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Chevrolet Blazer | V | 5031 | 8 Cyl 5.0L | 307 |
- Transmission Dipstick Kit; Locking; GM TH350 Trans; Includes Tube and Dipstick
- Locking; Includes Tube and Dipstick
- Transmission Dipstick Kit; Locking; Black CED Finish; Fits GM TH350 Transmissions; Includes Tube and Dipstick; Made from High-Quality Steel Material; Sold as One Kit
- Product Attributes:
- Transmission Type: Turbo 350
- Category: Transmission
- Feature/Benefit: ...because Nhra Says So.
- Applications: Gm Th350 Transmission
- Part Type: Transmission Dipstick
- Style: Locking
- Dipstick Location: Passenger Side
- Make: Gm
- ...because NHRA says so. No more tranny blowouts and fluid on the track with this affordable locking trans dipstick. Gold iridite finish. Computer formed for precise fit.
Additional Fitment Information:
| Vehicle | Transmission Manuf. Code |
|---|---|
| 1970 - Chevrolet Blazer | THM350 |
- High-Torque Starter; Gear Reduction Type; 1.4KW; Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 1.4KW; Compression Ratio:11 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- High-Torque Mini Starter; Gear Reduction Type; 1.4KW; Fits All Chevy V8 Engines; Billet Aluminum Mount; For 11.1:1 Compression Ratio Engines; 100% New Components; Offset Design for More Oil Pan Clearance; Black and Silver Finish; Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Category: Starters
- Power Output: 1.4 Kw
- Feature/Benefit: High-torque, Gear-reduction Design.
- Applications: Chevy Small Block Engines, Chevy Big Block Engines And Chevy V6 Engines
- Compression Ratio: 11 : 1
- Mounting Plate: Straight Bolt Mounting Plate
- Part Type: Starter Motor
- Flywheel Tooth Number: 153 & 168-tooth
- Make: Chevrolet
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations. Fits all Chevy V6 and small and big block V 8 engines using 153 or 168 tooth flywheels. Heavy-duty PROFORM P/N 66258 weighs 1-1/2 lbs. more and is 1" longer than P/N 66256.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Chevrolet Blazer | V | 5031 | 8 Cyl 5.0L | 307 |
- High-Torque Starter; Gear Reduction Type; 2.2KW; Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 2.2KW; Compression Ratio:15 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- High-Torque Mini Starter; Gear Reduction Type; 2.2KW; Fits All Chevy V8-V6 Engines; Billet Aluminum Mount; For 15.1:1 Compression Ratio Engines; 100% New Components; Offset Design for More Oil Pan Clearance; Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Category: Starters
- Power Output: 2.2 Kilo Watts
- Feature/Benefit: High-torque, Gear-reduction Design.
- Applications: Chevy V6 Engines, Chevy Small Block Engines And Chevy Big Block Engines
- Compression Ratio: 15 : 1
- Mounting Plate: Straight Bolt Mounting Plate
- Part Type: Starter Motor
- Flywheel Tooth Number: 153 & 168-tooth
- Make: Chevrolet
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Chevrolet Blazer | V | 5031 | 8 Cyl 5.0L | 307 |
- Electric Engine Water Pump; Aluminum; Blue Powder Coat; Fits SB Chevy Engines
- Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Blue
- Electric Engine Water Pump; Fits Small Block Chevy Engines; Made From Die Cast Aluminum; Body Has Blue Finish and Motor Has Black Finish; Flows 35 GPM; Billet 1.0 Inch NPT to 1-3/4 Inch Hose Fitting Included; Sold Individually
- Product Attributes:
- Rotation: Standard
- Category: Water Pumps
- Feature/Benefit: Affordable Electric Water Pumps Eliminate Unnecessary Weight And Impeller Drag Experienced At High Rpm, Pumps Up To 35+ Gallons Of Water Per Minute, And Delivers The Cooling That Can Make The Difference Between A Win And Second Place!
- Length: 6.5 Inch
- Applications: Chevy Small Block Engines
- Engine: Chevy Sb Gen 1
- Flow Rate: 35 Gpm
- Part Type: Water Pump
- Pump Flow: 35 Gpm
- Condition: New
- Make: Chevrolet
- Ever consider going electric? PROFORM's affordable electric water pumps eliminate unnecessary weight and impeller drag experienced at high RPM, pumps up to 35+ gallons of water per minute, and delivers the cooling that can make the difference between a win and second place! Durable but light-weight die-cast aluminum, epoxy powder coated for corrosion resistance in the color of your choice. Race or street. Comes with mating weather-tight connector. Draws 6 amps. Billet fitting (1in pipe to 1 3/in hose) included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Chevrolet Blazer | V | 5031 | 8 Cyl 5.0L | 307 |
- Electric Engine Water Pump; Aluminum; Black Powder Coat; Fits SB Chevy Engines
- Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Black
- Electric Engine Water Pump; Fits Small Block Chevy Engines; Made From High-Quality Die Cast Aluminum; Black Powder Coat Finish; Flows 35 GPM; Billet 1.0 Inch NPT to 1-3/4 Inch Hose Fitting Included; Sold Individually
- Product Attributes:
- Rotation: Standard
- Category: Water Pumps
- Feature/Benefit: Affordable Electric Water Pumps Eliminate Unnecessary Weight And Impeller Drag Experienced At High Rpm.
- Length: 6.5 Inch
- Applications: Chevy Small Block Engines
- Engine: Chevy Sb Gen 1
- Flow Rate: 35 Gpm
- Part Type: Water Pump
- Pump Flow: 35 Gpm
- Condition: New
- Make: Chevrolet
- Ever consider going electric? PROFORM's affordable electric water pumps eliminate unnecessary weight and impeller drag experienced at high RPM, pumps up to 35+ gallons of water per minute, and delivers the cooling that can make the difference between a win and second place! Durable but light-weight die-cast aluminum, epoxy powder coated for corrosion resistance in the color of your choice. Race or street. Comes with mating weather-tight connector. Draws 6 amps. Billet fitting (1in pipe to 1 3/hose) included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Chevrolet Blazer | V | 5031 | 8 Cyl 5.0L | 307 |
- Transmission Dipstick Kit; Locking; GM TH400 Trans; Includes Tube and Dipstick
- Locking; Includes Tube and Dipstick
- Transmission Dipstick Kit; Locking; Black Finish; Fits GM TH400 Transmissions; Includes Tube and Dipstick; Made from High-Quality Steel Material; Sold as One Kit
- Product Attributes:
- Transmission Type: Turbo 400
- Category: Transmission
- Feature/Benefit: ...because Nhra Says So.
- Applications: Gm Th400 Transmission
- Part Type: Transmission Dipstick
- Style: Locking
- Dipstick Location: Passenger Side
- Make: Gm
- ...because NHRA says so. No more tranny blowouts and fluid on the track with this affordable locking trans dipstick. Black finish. Computer formed for precise fit.
Additional Fitment Information:
| Vehicle | Transmission Manuf. Code |
|---|---|
| 1970 - Chevrolet Blazer | THM400 |
- Differential Cover; 'Perfect Launch' Model; Fits GM 12 Bolt; Aluminum; Black
- 12 Bolt; Aluminum; Black
- Differential Cover; 'Perfect Launch' Model; Fits GM 12 Bolt Rear Ends; Made From High-Quality Aluminum; Black Finish; Features 2 Bolts To Stabilize Bearing Main Caps, Two Magnetic Drain Plugs and Mounting Bolts. Sold Individually
- Product Attributes:
- Emblem: Perfect Launch Emblem
- Category: Differential Covers
- Feature/Benefit: Reinforced Lightweight Aluminum Rear End Covers Designed To Strengthen The Rear Housing Case In Heavy Torque Situations.
- Applications: Gm 12 Bolt, Passanger Car
- Part Type: Differential Cover
- Tool Type: Piston Installation Tools
- Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to stabilize bearing main caps, fluid capacity and magnetic drain plugs, and mounting bolts. All covers have a black painted finish.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1970 - Chevrolet Blazer | V | 5031 | 8 Cyl 5.0L | Base | B | Naturally Aspirated | 307 |
- Engine Water Pump; Mechanical Short Style; High Flow Model; Satin; SB Chevy
- Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Satin
- Engine Water Pump; Fits Small Block Chevy Engines; High-Flow Model; Mechanical Type; Short Style Pump; Made from High-Quality Aluminum; Satin Finish; Heavy-Duty Ball Bearings; Sold Each
- Product Attributes:
- Rotation: Standard
- Category: Mech. Water Pump
- Feature/Benefit: Lightweight Aluminum
- Length: Short
- Applications: Chevy Small Block Engines
- Flow Rate: 25 Gpm
- Part Type: Water Pump
- Tool Type: Piston Installation Tools
- Make: Chevrolet
- PROFORM's new high flow mechanical water pumps feature heavy duty ball bearings for up to 40% more coolant flow giving you real performance value for your dollar. Aluminum construction reduces front end weight!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1970 - Chevrolet Blazer | V | 5031 | 8 Cyl 5.0L | 307 |
Showing 1 - 10 of 41 products
Loading...