Image
Product
Price
- 4 Pcs
- Black Crinkle w/Bowtie Logo SB Chevy
- Sold As One Set Of 4 Pieces
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Hold-down Clamps
- Feature/Benefit: Premium Black Crinkle Hold Down Clamps With Distinctive Look And Boldly Striking Bowtie Emblems, Inlaid With Classic Chevrolet Red, Are Ced Painted For Long-term Corrosion Resistance, And Then Black Crinkle Painted On The Outer Surface.
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986; Chevy V6 Engines
- Part Type: Valve Cover Holdown Clamps
- Emblem Style: Recessed Red Emblem
- Material: Steel
- Finish: Black Crinkle
- Premium Black crinkle hold down clamps with distinctive look and boldly striking Bowtie Emblems, inlaid with classic Chevrolet red, are CED painted for long-term corrosion resistance, and then black crinkle painted on the outer surface. By spreading the load over a wider area, this clamp minimizes distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage. Fits Chevrolet small-block V8 and V6/90 engines through 1986. 4 per package.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1976 - Chevrolet Monza | V | - | 8 Cyl 4.3L | 2+2 | G | Naturally Aspirated | 262 |
- Black Cap
- Dist w/Internal Coil Black Cap
- Kit Includes Cap Coil, Rotor, Coil Cover, Control Module, Adjustable Vacuum Advance Canister Bushing, Wire Harness, Curve Kit and Hardware
- Product Attributes:
- Voltage: 50,000 Volts
- Ignition Coil Included: Yes
- Category: Gm Hei Tune-up Kit
- Number of Cylinders: 8
- Feature/Benefit: Gm V8 Hei Electronic Tune-up Kit: Contains High-power 50,000 Volt Hei Coil; Superior No Arc Rotor; Coil Dust Cover; High-performance, Low-saturation Control Module; Adjustable Vacuum Advance Unit; Hei Bushing; Wire Harness & Capacitor; High Performance Ad
- Applications: Gm Hei Distributors 1973 To 1990
- Cap Color: Black
- Make: Gm
- Vacuum Advance: Adjustable
- and mounting hardware.
-
Suggested Purchase Quantity: 5
- Most jobs typically require 5 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1976 - Chevrolet Monza | V | - | 8 Cyl 4.3L | 262 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter Gear Reduction Type 1.4KW Compression Ratio: 11:1 Finish: Natural Flywheel Tooth Number: 153 and 168-Tooth Gear Reduction Ratio: 3.75: 1 Material: Aluminum/Steel Mounting Plate: Straight Bolt Mounting Plate
- Sold Each
- Product Attributes:
- Rotation: Standard
- Design: Offset Gear Reduction
- Gear Reduction Ratio:
- 11.0:1
- 3.75:1
- Grade Type: Performance
- Feature/Benefit: High-torque, Gear-reduction Design.
- Over-Crank Protection: No
- Compression Ratio: 11 : 1
- Nose Cone Type: Open Nose
- Part Type: Starter Motor
- Make: Chevrolet
- Family: Mini Hitachi
- Finish: Natural
- Category: Starters
- Power Output: 1.4 Kw
- Applications: Chevy Small Block Engines, Chevy Big Block Engines And Chevy V6 Engines
- Mounting Plate: Straight Bolt Mounting Plate
- Solenoid Attached: Yes
- Flywheel Tooth Number: 153 & 168-tooth
- Mounting Type: Flange
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations. Fits all Chevy V6 and small and big block V 8 engines using 153 or 168 tooth flywheels. Heavy-duty PROFORM P/N 66258 weighs 1-1/2 lbs. more and is 1" longer than P/N 66256.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Valves | Engine | Engine VIN | Engine Version | CID |
|---|---|---|---|---|---|---|---|---|
| 1976 - Chevrolet Monza | V | - | OHV | 16 | 8 Cyl 5.0L | Q | Chevrolet | 305 |
- SB Chevy
- Chrome SB Chevy Mounting Bolt(s) Included: No Emblem Style: Recessed Red and Black Emblem Valve Cover Bolt Pattern: Perimeter Bolt Valve Cover Height: Tall Material: Die Cast Aluminum
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Length:
- 19.75
- 502
- Width:
- 127
- 5
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Aluminum
- Die Cast Aluminum
- PCV Grommet Included: Yes
- Feature/Benefit: Sold In Pairs.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Height:
- 3
- 76
- Valve Cover Gasket Included: No
- Valve Cover Height: 4 Inch
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Cast
- Material Thickness:
- 0.175
- 4.5
- Breather Cap Included: No
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.825
- 71.5
- Sheen Level: High Gloss
- Valve Cover Type: Tall
- New in 2009! These innovative valve covers have an aggressive design that will make your engine stand out at the show. These premium die-cast aluminum valve covers offer more internal clearance than most other valve covers because our innovative mold designs are at the forefront of modern die-casting technology. These valve covers are available in 10 different styles, which include raised, recessed, and no emblems at all. All valve covers with baffles include grommets. Sold in pairs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1976 - Chevrolet Monza | V | - | 8 Cyl 4.3L | 262 |
- SB Chevy
- Black SB Chevy Mounting Bolt(s) Included: No Emblem Style: Raised/Milled Emblem Valve Cover Bolt Pattern: Perimeter Bolt Valve Cover Height: Tall Material: Die Cast Aluminum Height: 4.5 Width: 9.75 Length: 20.0 Weight: 7.75
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Length:
- 19.75
- 502
- Width:
- 127
- 5
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish:
- Black Crinkle
- Powder Coated
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Aluminum
- Die Cast Aluminum
- PCV Grommet Included: Yes
- Feature/Benefit: New In 2009!
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Height:
- 3
- 76
- Valve Cover Gasket Included: No
- Valve Cover Height: 4 Inch
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Cast
- Material Thickness:
- 0.175
- 4.5
- Breather Cap Included: No
- Emblem Style: Raised/milled Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.825
- 71.5
- Sheen Level: Matte
- Valve Cover Type: Tall
- These innovative valve covers have an aggressive design that will make your engine stand out at the show. These premium die-cast aluminum valve covers offer more internal clearance than most other valve covers because our innovative mold designs are at the forefront of modern die-casting technology. These valve covers are available in 10 different styles, which include raised, recessed, and no emblems at all. All valve covers with baffles include grommets. Sold in pairs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1976 - Chevrolet Monza | V | - | 8 Cyl 4.3L | 262 |
- SB Chevy
- Orange SB Chevy Mounting Bolt(s) Included: No Emblem Style: Raised/Milled Emblem Valve Cover Bolt Pattern: Perimeter Bolt Valve Cover Height: Tall Material: Die Cast Aluminum
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Length:
- 19.75
- 502
- Width:
- 127
- 5
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish:
- Chevy Orange
- Painted
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Aluminum
- Die Cast Aluminum
- PCV Grommet Included: Yes
- Feature/Benefit: Valve Covers Feature Raised And Milled Aluminum Inchchevrolet Inch And Inchbowtie Inch Logos.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Height:
- 3
- 76
- Valve Cover Gasket Included: No
- Valve Cover Height: 4 Inch
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Cast
- Material Thickness:
- 0.175
- 4.5
- Breather Cap Included: No
- Emblem Style: Raised/milled Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.825
- 71.5
- Sheen Level: Semi-gloss
- Valve Cover Type: Tall
- These innovative valve covers have an aggressive design that will make your engine stand out at the show. These premium die-cast aluminum valve covers offer more internal clearance than most other valve covers because our innovative mold designs are at the forefront of modern die-casting technology. All valve covers with baffles include grommets. Sold in pairs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1976 - Chevrolet Monza | V | - | 8 Cyl 4.3L | 262 |
- Fits SB Chevy
- Stamped Steel Short Chrome with Bowtie Logo Fits SB Chevy Mounting Bolt(s) Included: No Emblem Style: Recessed Red and Black Emblem Valve Cover Bolt Pattern: Perimeter Bolt Valve Cover Height: Stock
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Length:
- 19.75
- 502
- Width:
- 127
- 5
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: The Latest Look For Chevrolet Small-block V8, 1958-1986.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Height:
- 2.5
- 64
- Valve Cover Gasket Included: No
- Valve Cover Height: Stock
- Technical Note: Chev Sm-blk Valve Covers & Valve Cover W/baffle Will Not Clear Most Stud Girdles
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.375
- 61
- Sheen Level: High Gloss
- Valve Cover Type: Short
- The Latest Look for Chevrolet Small-block V8, 1958-1986. These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. The chrome plating meets GM quality specifications. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. Stamped valve covers are offered in either tall or production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy small-block valve covers and valve covers with baffles will not clear most stud girdle applications. Chevy small-block or S/B refers to 1958-1986 engines, unless otherwise specified.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1976 - Chevrolet Monza | V | - | 8 Cyl 4.3L | 262 |
- Includes Tube and Dipstick
- Locking Includes Tube and Dipstick
- Sold as One Kit
- Product Attributes:
- Handle Color: Black
- Feature/Benefit: ...because Nhra Says So.
- Part Type: Transmission Dipstick
- Style: Locking
- Tube Included: Yes
- Dipstick Location: Passenger Side
- Tube Length: 14
- Mounting Hole Quantity: 1
- Make: Gm
- Finish: Black
- Transmission Type: Turbo 350
- Adjustable: No
- Category: Transmission
- Outside Diameter: 125
- Applications: Gm Th350 Transmission
- Material: Steel
- ...because NHRA says so. No more tranny blowouts and fluid on the track with this affordable locking trans dipstick. Gold iridite finish. Computer formed for precise fit.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Transmission Manuf. Code |
|---|---|
| 1976 - Chevrolet Monza | THM350 |
- Internally Balanced
- Fits SB Chevy Engines Internally Balanced Diameter: 6 3/4-in. Finish: Natural Material: Nodular Iron
- 100% New OEM Replacement Unit
- Product Attributes:
- Diameter: 6 3/4-in.
- Category: Harmonic Bal
- Feature/Benefit: Fits Chevy Small And Big Block Engines.
- Applications: Chevy Small Block 350 Engines 1955 To 1986
- Internally/Externally Balanced: Internal
- Material: Nodular Iron
- Thickness: 1 1/8 Inch
- Finish: Natural
- RPM Limit: 6000 Rpm
- Fits Chevy small and big block engines. These are brand-new OE replacement harmonic balancers. Affordable pricing eliminates the need to clean your old stock balancer. Enhance your balancer by adding the patented balancer covers.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1976 - Chevrolet Monza | V | - | 8 Cyl 4.3L | 262 |
- 100% New
- Amperage Output: 100 AMP Case Style: 10SI Style Finish: Chrome
- Sold Individually
- Product Attributes:
- Brushless: No
- Voltage: 12 Volt
- Ground Type: Positive
- Pulley Diameter: 2 1/2 Inch
- External Fan Included: Yes
- Part Type: Alternator
- Case Material: Aluminum
- Case Color: Chrome
- Fan Type: Internal
- Amperage Rating: 100
- Amperage Output: 100 Amp
- Family: 10si Style
- Finish: Chrome
- Case Circumference: 17.5
- Drive End To Rotor Shaft End Distance: 6
- AC Service Tap: No
- Category: Alternators
- Applications: Chevy Small Block 305 To 350 Engines 1972 To 1987; Chevy Big Block 402 To 454 Engines 1970 To 1986; Pontiac 326 To 455 Engines 1962 To 1979; Oldsmobile 215 To 455 Engines 1963 To 1984; Buick 215 To 455 Engines 1963 To 1977
- External Regulator Included: Yes
- Case Style: 10si Style
- Regulator Type: Internal
- Decoupled Or Clutch Pulley: Yes
- Distance Between Mounting Feet: 6.133
- Drive End To Pulley 1st Groove Distance: 1.4
- Feature/Benefit: This Alternator Can Be Clocked To All Four Positions By The User.
- One Wire Capable: Yes
- Outside Pulley Diameter: 2.621
- Pulley Cogged Quantity: 1
- Plug Clock Rear View Main Mounting Ear at 6 O Clock: 2
- Pulley Belt Type: V-belt
- Pulley Groove Quantity: 0
- Mounting Type: Standard
- Can you tell the difference? Most chrome alternators look nearly the same, and that's why what's on the inside is so critical. Reliability starts with how it's made. Choosing PROFORM means choosing alternators with components produced by highly specialized machines, assembled by highly trained personnel using dedicated jigs and equipment, with everything 100% new for maximum longevity and optimum performance. After assembly each alternator is individually tested at the factory. Finally, it's boxed with a quality assurance graph that documents the specific unit's output performance. We do the testing, not you! And PROFORM proves it!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1976 - Chevrolet Monza | L | 2294 | 4 Cyl 2.3L | 2+2 | A | Naturally Aspirated | 140 |
Showing 1 - 10 of 89 products
Loading...