1986 Chevrolet K20 Proform Parts
Choose your Submodel for your 1986 Chevrolet K20
Image
Product
Price
- Black Cap
- Dist w/Internal Coil Black Cap
- Kit Includes Cap Coil, Rotor, Coil Cover, Control Module, Adjustable Vacuum Advance Canister Bushing, Wire Harness, Curve Kit and Hardware
- Product Attributes:
- Voltage: 50,000 Volts
- Ignition Coil Included: Yes
- Category: Gm Hei Tune-up Kit
- Number of Cylinders: 8
- Feature/Benefit: Gm V8 Hei Electronic Tune-up Kit: Contains High-power 50,000 Volt Hei Coil; Superior No Arc Rotor; Coil Dust Cover; High-performance, Low-saturation Control Module; Adjustable Vacuum Advance Unit; Hei Bushing; Wire Harness & Capacitor; High Performance Ad
- Applications: Gm Hei Distributors 1973 To 1990
- Cap Color: Black
- Make: Gm
- Vacuum Advance: Adjustable
- and mounting hardware.
-
Suggested Purchase Quantity: 5
- Most jobs typically require 5 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Chevrolet K20 | V | - | 8 Cyl 5.7L | 350 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter Gear Reduction Type 1.4KW Compression Ratio: 11:1 Finish: Natural Flywheel Tooth Number: 153 and 168-Tooth Gear Reduction Ratio: 3.75: 1 Material: Aluminum/Steel Mounting Plate: Straight Bolt Mounting Plate
- Sold Each
- Product Attributes:
- Rotation: Standard
- Design: Offset Gear Reduction
- Gear Reduction Ratio:
- 11.0:1
- 3.75:1
- Grade Type: Performance
- Feature/Benefit: High-torque, Gear-reduction Design.
- Over-Crank Protection: No
- Compression Ratio: 11 : 1
- Nose Cone Type: Open Nose
- Part Type: Starter Motor
- Make: Chevrolet
- Family: Mini Hitachi
- Finish: Natural
- Category: Starters
- Power Output: 1.4 Kw
- Applications: Chevy Small Block Engines, Chevy Big Block Engines And Chevy V6 Engines
- Mounting Plate: Straight Bolt Mounting Plate
- Solenoid Attached: Yes
- Flywheel Tooth Number: 153 & 168-tooth
- Mounting Type: Flange
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations. Fits all Chevy V6 and small and big block V 8 engines using 153 or 168 tooth flywheels. Heavy-duty PROFORM P/N 66258 weighs 1-1/2 lbs. more and is 1" longer than P/N 66256.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Valves | Engine | Engine VIN | Engine Version | CID |
|---|---|---|---|---|---|---|---|---|
| 1986 - Chevrolet K20 | V | - | OHV | 16 | 8 Cyl 5.7L | L | Chevrolet | 350 |
- Fits SB Chevy Engines
- Electric Engine Water Pump Aluminum Fits SB Chevy Engines Finish: Blue
- Sold Individually
- Product Attributes:
- Rotation: Standard
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Length: 6.5 Inch
- Impeller Vane Quantity: 1
- Part Type: Water Pump
- Make: Chevrolet
- Finish: Blue
- Outlet Quantity: 1
- Hub Height: 7
- Category: Water Pumps
- Installation Warnings: No
- Applications: Chevy Small Block Engines
- Hub Hole Quantity: 1
- Impeller Rotation: Standard
- Pulley Included: No
- Hub Hole Thread Size: 1 Ntp
- Feature/Benefit: Affordable Electric Water Pumps Eliminate Unnecessary Weight And Impeller Drag Experienced At High Rpm, Pumps Up To 35+ Gallons Of Water Per Minute, And Delivers The Cooling That Can Make The Difference Between A Win And Second Place!
- Engine: Chevy Sb Gen 1
- Flow Rate: 35 Gpm
- Pump Flow: 35 Gpm
- Hub Hole Thread Diameter: 1
- Includes Back Housing: No
- Mounting Hole Quantity: 4
- Water Pump Drive Type: Electric
- Thermostat And Housing Included: No
- Condition: New
- Impeller Material: Aluminum
- Ever consider going electric? PROFORM's affordable electric water pumps eliminate unnecessary weight and impeller drag experienced at high RPM, pumps up to 35+ gallons of water per minute, and delivers the cooling that can make the difference between a win and second place! Durable but light-weight die-cast aluminum, epoxy powder coated for corrosion resistance in the color of your choice. Race or street. Comes with mating weather-tight connector. Draws 6 amps. Billet fitting (1in pipe to 1 3/in hose) included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Chevrolet K20 | V | - | 8 Cyl 5.7L | 350 |
- SB Chevy
- Chrome SB Chevy Mounting Bolt(s) Included: No Emblem Style: Recessed Red and Black Emblem Valve Cover Bolt Pattern: Perimeter Bolt Valve Cover Height: Tall Material: Die Cast Aluminum
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Length:
- 19.75
- 502
- Width:
- 127
- 5
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish: Chrome
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Aluminum
- Die Cast Aluminum
- PCV Grommet Included: Yes
- Feature/Benefit: Sold In Pairs.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Height:
- 3
- 76
- Valve Cover Gasket Included: No
- Valve Cover Height: 4 Inch
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Cast
- Material Thickness:
- 0.175
- 4.5
- Breather Cap Included: No
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.825
- 71.5
- Sheen Level: High Gloss
- Valve Cover Type: Tall
- New in 2009! These innovative valve covers have an aggressive design that will make your engine stand out at the show. These premium die-cast aluminum valve covers offer more internal clearance than most other valve covers because our innovative mold designs are at the forefront of modern die-casting technology. These valve covers are available in 10 different styles, which include raised, recessed, and no emblems at all. All valve covers with baffles include grommets. Sold in pairs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Chevrolet K20 | V | - | 8 Cyl 5.7L | 350 |
- 100% New
- 80 AMP 1 Wire Style Machined Pulley Chrome Finish 100% New
- Sold Individually
- Product Attributes:
- Brushless: No
- Voltage: 12 Volt
- Ground Type: Positive
- Pulley Diameter: 2 1/2 Inch
- External Fan Included: Yes
- Part Type: Alternator
- Case Material: Aluminum
- Case Color: Chrome
- Fan Type: Internal
- Amperage Rating: 80
- Amperage Output: 80 Amp
- Family: 10si Style
- Finish: Chrome
- Case Circumference: 17.5
- Drive End To Rotor Shaft End Distance: 6
- AC Service Tap: No
- Category: Alternators
- Applications: Chevy Small Block 305 To 350 Engines 1972 To 1987; Chevy Big Block 402 To 454 Engines 1970 To 1986; Pontiac 326 To 455 Engines 1962 To 1979; Oldsmobile 215 To 455 Engines 1963 To 1984; Buick 215 To 455 Engines 1963 To 1977
- External Regulator Included: Yes
- Case Style: 10si Style
- Regulator Type: Internal
- Decoupled Or Clutch Pulley: Yes
- Distance Between Mounting Feet: 6.133
- Drive End To Pulley 1st Groove Distance: 1.4
- Feature/Benefit: A Manufacturing Break-through Has Enabled Proform To Offer 100% New Alternators With The Same Affordability As Our Popular Re-built Models!
- One Wire Capable: Yes
- Outside Pulley Diameter: 2.621
- Pulley Cogged Quantity: 1
- Plug Clock Rear View Main Mounting Ear at 6 O Clock: 2
- Pulley Belt Type: V-belt
- Pulley Groove Quantity: 0
- Mounting Type: Standard
- Can you tell the difference? Most chrome alternators look nearly the same, and that's why what's on the inside is so critical. Reliability starts with how it's made. Choosing PROFORM means choosing alternators with components produced by highly specialized machines, assembled by highly trained personnel using dedicated jigs and equipment, with everything 100% new for maximum longevity and optimum performance. After assembly each alternator is individually tested at the factory. Finally, it's boxed with a quality assurance graph that documents the specific unit's output performance. We do the testing, not you! And PROFORM proves it!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Chevrolet K20 | V | - | 8 Cyl 5.7L | 350 |
- 100% New
- 100 AMP Style 1-Wire Style Natural Finish 100% New
- Sold Individually
- Product Attributes:
- Brushless: No
- Ground Type: Positive
- Pulley Diameter: 2 1/2 Inch
- External Fan Included: Yes
- Case Material: Aluminum
- Case Color: Natural
- Fan Type: Internal
- Amperage Rating: 100
- Amperage Output: 100 Amp
- Family: 10si Style
- Finish:
- Natural
- Powder Coated
- Case Circumference: 10
- Drive End To Rotor Shaft End Distance: 3.25
- AC Service Tap: No
- Category: Alternators
- External Regulator Included: Yes
- Case Style: 10si Style
- Decoupled Or Clutch Pulley: Yes
- Drive End To Pulley 1st Groove Distance: 1.4
- Feature/Benefit: A Manufacturing Break-through Has Enabled Proform To Offer 100% New Alternators With The Same Affordability As Others' Re-built Models!
- One Wire Capable: Yes
- Outside Pulley Diameter: 2.621
- Pulley Cogged Quantity: 1
- Plug Clock Rear View Main Mounting Ear at 6 O Clock: 2
- Pulley Belt Type: V-belt
- Pulley Groove Quantity: 0
- Mounting Type: Standard
- Can you tell the difference? Most alternators look nearly the same, and that's why what's on the inside is so critical. Reliability starts with how it's made. Choosing PROFORM means choosing alternators with components produced by highly specialized machines, assembled by highly trained personnel using dedicated jigs and equipment, with everything 100% new for maximum longevity and optimum performance. After assembly each alternator is individually tested at the factory. Finally, it's boxed with a quality assurance graph that documents the specific unit's output performance. We do the testing, not you! And PROFORM proves it!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1986 - Chevrolet K20 | V | - | 8 Cyl 5.7L | Silverado | 350 |
- 16 Pcs
- SB Chevy Std Length 16 Pcs Finish: Black Oxide Material: 4130 Chromoly Steel Stud Diameter (in.): 5/16 in.
- Sold As Set Of 16 Pieces
- Product Attributes:
- Category: 1-piece Pushrod Set
- Feature/Benefit: Heat-treated .065 Wall Thickness 4130 Chrome Moly, For Use With Guide Plates.
- Applications: Chevy Small Block Engines
- Exhaust Overall Length: 7.800 In.
- Make: Chevrolet
- Material: 4130 Chromoly Steel
- Pushrod Style: 1-piece
- Stud Diameter (in.): 5/16 In.
- Finish: Black Oxide
- Intake Overall Length: 7.800 In.
- Heat-treated .065 wall thickness 4130 chrome moly, for use with guide plates. 25% thicker walls than a major competitor's brand. Gloss black finish. Premium one-piece pushrods for the price of competitors 3-piece! Each end is precision formed with specified radius for optimum wear characteristics with minimal metal-to-metal friction. 16 pieces per package.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Chevrolet K20 | V | - | 8 Cyl 5.7L | 350 |
- Fits SB Chevy Engines
- Electric Engine Water Pump Aluminum Fits SB Chevy Engines Finish: Black
- Sold Individually
- Product Attributes:
- Rotation: Standard
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Length: 6.5 Inch
- Impeller Vane Quantity: 1
- Part Type: Water Pump
- Make: Chevrolet
- Finish: Black
- Outlet Quantity: 1
- Hub Height: 6.5
- Category: Water Pumps
- Installation Warnings: No
- Applications: Chevy Small Block Engines
- Hub Hole Quantity: 1
- Impeller Rotation: Standard
- Pulley Included: No
- Hub Hole Thread Size: 1 Ntp
- Feature/Benefit: Affordable Electric Water Pumps Eliminate Unnecessary Weight And Impeller Drag Experienced At High Rpm.
- Engine: Chevy Sb Gen 1
- Flow Rate: 35 Gpm
- Pump Flow: 35 Gpm
- Hub Hole Thread Diameter: 1
- Includes Back Housing: No
- Mounting Hole Quantity: 4
- Water Pump Drive Type: Electric
- Thermostat And Housing Included: No
- Condition: New
- Impeller Material: Aluminum
- Ever consider going electric? PROFORM's affordable electric water pumps eliminate unnecessary weight and impeller drag experienced at high RPM, pumps up to 35+ gallons of water per minute, and delivers the cooling that can make the difference between a win and second place! Durable but light-weight die-cast aluminum, epoxy powder coated for corrosion resistance in the color of your choice. Race or street. Comes with mating weather-tight connector. Draws 6 amps. Billet fitting (1in pipe to 1 3/hose) included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Chevrolet K20 | V | - | 8 Cyl 5.7L | 350 |
- Fits SB Chevy
- Stamped Steel Short Black with Bowtie Logo Fits SB Chevy Mounting Bolt(s) Included: No Valve Cover Bolt Pattern: Perimeter Bolt Valve Cover Height: Stock Emblem Style: Recessed Red Emblem
- Sold As Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Length:
- 19.75
- 502
- Width:
- 127
- 5
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Perimeter Bolt
- Hold Down Tabs Included: No
- Finish:
- Black Crinkle
- Powder Coated
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: Engine Valve Covers Feature The Red Inchchevrolet Inch And Inchbowtie Inch Logos.
- Engine: Chevy Sb Gen 1
- Breather Grommet Included: Yes
- Height:
- 2.5
- 64
- Valve Cover Gasket Included: No
- Valve Cover Height: Stock
- Mounting Location: Perimeter
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Emblem Style: Recessed Red Emblem
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.375
- 61
- Sheen Level: Matte
- Valve Cover Type: Short
- These engine valve covers are manufactured from high quality stamped steel material. They are a short style valve cover and do not include oil breather baffles. They have a great looking black crinkle finish with a red Chevrolet and Bowtie logos. Designed to fit 1955 to 1986 262-400 Small Block Chevy engines. This is an officially licensed Gm Performance Parts product. Sold as one pair. Backed by a limited 30 day factory warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Chevrolet K20 | V | - | 8 Cyl 5.7L | 350 |
- 1-Pair
- Emblem: Chevy Bowtie Emblem
- Sold As One Pair
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Wire Looms - Black
- Feature/Benefit: Using The Divisional Red Color, The Chevrolet Name And Bowtie Emblem Are Molded Onto The Black Nylon Head Of Each Wire Loom, Mounted On Chrome Stems.
- Using the divisional red color, the CHEVROLET name and Bowtie Emblem are molded onto the black nylon head of each wire loom, mounted on chrome stems. Fits Chevrolet small-block V8, 1959-86 and Chevrolet big-block V8 1965-91. 4-wire looms, 2 per package.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Chevrolet K20 | V | - | 8 Cyl 5.7L | 350 |
Showing 1 - 10 of 93 products
Loading...