Image
Product
Price
- Wedge-Locking Header Bolts
- Hex Head; 3/8-16 Thread X 3/4 in Black Oxide
- Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 3/4 Inch
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Part Type: Header Bolts
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
- 12 Pcs
- Hex Head; 3/8 dia. X 1in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 1 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 1.4KW; Compression Ratio:11 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- Sold Each
- Product Attributes:
- Rotation: Standard
- Design: Offset Gear Reduction
- Gear Reduction Ratio:
- 11.0:1
- 3.75:1
- Grade Type: Performance
- Feature/Benefit: High-torque, Gear-reduction Design.
- Over-Crank Protection: No
- Compression Ratio: 11 : 1
- Nose Cone Type: Open Nose
- Part Type: Starter Motor
- Make: Chevrolet
- Family: Mini Hitachi
- Finish: Natural
- Category: Starters
- Power Output: 1.4 Kw
- Applications: Chevy Small Block Engines, Chevy Big Block Engines And Chevy V6 Engines
- Mounting Plate: Straight Bolt Mounting Plate
- Solenoid Attached: Yes
- Flywheel Tooth Number: 153 & 168-tooth
- Mounting Type: Flange
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations. Fits all Chevy V6 and small and big block V 8 engines using 153 or 168 tooth flywheels. Heavy-duty PROFORM P/N 66258 weighs 1-1/2 lbs. more and is 1" longer than P/N 66256.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
- Fits SB Chevy Engines
- Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Black
- Sold Individually
- Product Attributes:
- Rotation: Standard
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Length: 6.5 Inch
- Impeller Vane Quantity: 1
- Part Type: Water Pump
- Make: Chevrolet
- Finish: Black
- Outlet Quantity: 1
- Hub Height: 6.5
- Category: Water Pumps
- Installation Warnings: No
- Applications: Chevy Small Block Engines
- Hub Hole Quantity: 1
- Impeller Rotation: Standard
- Pulley Included: No
- Hub Hole Thread Size: 1 Ntp
- Feature/Benefit: Affordable Electric Water Pumps Eliminate Unnecessary Weight And Impeller Drag Experienced At High Rpm.
- Engine: Chevy Sb Gen 1
- Flow Rate: 35 Gpm
- Pump Flow: 35 Gpm
- Hub Hole Thread Diameter: 1
- Includes Back Housing: No
- Mounting Hole Quantity: 4
- Water Pump Drive Type: Electric
- Thermostat And Housing Included: No
- Condition: New
- Impeller Material: Aluminum
- Ever consider going electric? PROFORM's affordable electric water pumps eliminate unnecessary weight and impeller drag experienced at high RPM, pumps up to 35+ gallons of water per minute, and delivers the cooling that can make the difference between a win and second place! Durable but light-weight die-cast aluminum, epoxy powder coated for corrosion resistance in the color of your choice. Race or street. Comes with mating weather-tight connector. Draws 6 amps. Billet fitting (1in pipe to 1 3/hose) included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 2.2KW; Compression Ratio:15 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 15 : 1
- Part Type: Starter Motor
- Make: Chevrolet
- Finish: Natural
- Category: Starters
- Power Output: 2.2 Kilo Watts
- Mounting Plate: Straight Bolt Mounting Plate
- Applications: Chevy V6 Engines, Chevy Small Block Engines And Chevy Big Block Engines
- Flywheel Tooth Number: 153 & 168-tooth
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
- SB Chevy
- Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Satin
- Sold Each
- Product Attributes:
- Rotation: Standard
- Category: Mech. Water Pump
- Feature/Benefit: Lightweight Aluminum
- Length: Short
- Applications: Chevy Small Block Engines
- Flow Rate: 25 Gpm
- Part Type: Water Pump
- Tool Type: Piston Installation Tools
- Make: Chevrolet
- Material: Aluminum
- Finish: Satin
- PROFORM's new high flow mechanical water pumps feature heavy duty ball bearings for up to 40% more coolant flow giving you real performance value for your dollar. Aluminum construction reduces front end weight!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
- 168 Tooth
- High-Torque Starter; High Compression; Compression Ratio:14 : 1; Finish:Natural; Flywheel Tooth Number:168-Tooth; Gear Reduction Ratio:4.41:1; Material:Aluminum/Steel; Mounting Plate:Staggered Bolt Mounting Plate; Power Output:1.9 Kilo Watts
- Natural Finish
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 4.41:1
- Feature/Benefit: For Engines With Monster Cubic Inches Or Compression Ratios, These 100% New Starters Challenge The Specifications, Durability, And Reliability Of Anything On The Market.
- Compression Ratio: 14 : 1
- Part Type: Starter Motor
- Make: Chevrolet
- Finish: Natural
- Category: Starters
- Power Output: 1.9 Kilo Watts
- Mounting Plate: Staggered Bolt Mounting Plate
- Applications: Chevy Small Block Engines And Chevy Big Block Engines
- Flywheel Tooth Number: 168-tooth
- Material: Aluminum/steel
- For engines with monster cubic inches or compression ratios, these 100% NEW starters challenge the specifications, durability, and reliability of anything on the market. Built from scratch with all-new components, the torque rating is a healthy 4.41:1 gear reduction, capable of cranking engines up to a whopping 14:1 compression. Comes in the NEW Race Box Packaging! Fits Chevy small and big block engines. Fits Chevy V8.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
- For SB Chevy 69-91
- For SB Chevy; Mounting Bolt(s) Included:No;Finish:Black Crinkle; Material:Steel; Emblem Style:Recessed Red Emblem
- Sold Each
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Technical Note: Gm P/n 10111769 Interchanges W/ Timken And National Part No. 9845.
- Category: Timing Chain Covers
- Feature/Benefit: Black Crinkle Valve Covers, With Their Distinctive Look And Boldly Striking Bowtie And Chevrolet Emblems, Inlaid With Classic Chevrolet Red, Are Ced Painted For Long-term Corrosion Resistance, And Then Black Crinkle Painted On The Outer Surface.
- Applications: Chevy Small Block 262 To 400 Engines 1958 To 1991
- Engine: Chevy Sb Gen 1
- Emblem Style: Recessed Red Emblem
- Mounting Bolt(s) Included: No
- Make: Chevrolet
- Material: Steel
- Finish: Black Crinkle
- Black crinkle valve covers, with their distinctive look and boldly striking Bowtie and CHEVROLET Emblems, inlaid with classic Chevrolet red, are CED painted for long-term corrosion resistance, and then black crinkle painted on the outer surface. Technical Note: Replacement oil seal: GM P/N 10111769 may be difficult to locate, but Timken and National currently produce this oil seal under part no. 9845.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
- 4 Pcs
- Chrome with Red Bowtie Logo; SB Chevy
- Sold As One Set of 4 Pieces
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Hold-down Clamps
- Feature/Benefit: Premium Street Performance Chrome Hold-down Clamps With Distinctive Look And Boldly Striking Bowtie Emblems, Inlaid With Classic Chevrolet Red.
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986; Chevy V6 Engines; Chevy Big Block 396 To 454 Engines 1965 To 1996
- Part Type: Valve Cover Holdown Clamps
- Emblem Style: Recessed Red & Black Emblem
- Material: Steel
- Finish: Chrome
- Premium Street Performance Chrome hold-down clamps with distinctive look and boldly striking Bowtie Emblems, inlaid with classic Chevrolet red. By spreading the load over a wider area, this clamp minimizes distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage. Fits Chevrolet small-block V8 and V6/90 engines through 1986. 4 per package.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1988 - Chevrolet Camaro |
- SB Chevy
- Center Bolt Style;SB Chevy; Mounting Bolt(s) Included:No; Emblem:CHEVROLET and Bowtie Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Stock; Finish:Black Crinkle; Material:Stamped Steel
- Sold As One Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- Grade Type: Premium
- Mounting Hardware Included: No
- Grommets Included: Yes
- Length:
- 19.75
- 502
- Width:
- 127
- 5
- Oil Filler Cap Included: No
- Make: Chevrolet
- Valve Cover Bolt Pattern: Center Bolt
- Hold Down Tabs Included: No
- Finish:
- Black Crinkle
- Powder Coated
- Contains Oil Baffles: Yes
- Category: Valve Covers
- Cylinder Head Type: Ohv
- Applications: Chevy Small Block Engines 1987 To Pre Ls
- Material:
- Stamped Steel
- Steel
- PCV Grommet Included: Yes
- Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers.
- Engine: Chevy Sb Gen 2 Vortec
- Breather Grommet Included: Yes
- Height:
- 2.25
- 57
- Valve Cover Gasket Included: No
- Valve Cover Height: Stock
- Technical Note: Stock Height Chevy Small Block Valve Covers Will Not Clear Valve Trains Using Stud Girdles
- Mounting Location: Center
- Baffeled: Yes
- Surface Type: Logo
- Construction: Stamped
- Material Thickness:
- 0.125
- 3
- Breather Cap Included: No
- Mounting Bolt(s) Included: No
- Inside Clearance Height:
- 2.125
- 54
- Sheen Level: Matte
- Valve Cover Type: Short
- These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. These valve covers bear the powerful Bowtie Emblem. These stamped valve covers are offered in production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy small-block valve covers and valve covers with baffles will not clear most stud girdle applications. Fits Chevy small-block engines 1987 to current.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
Showing 1 - 10 of 25 products
Loading...