Image
Product
Price
- High-Torque Starter; Gear Reduction Type; Stagger Bolt; Fits Chevy V8-V6 Engines
- High-Torque Starter; Stagger Bolt; Compression Ratio:10 : 1; Finish:Silver/Black; Flywheel Tooth Number:168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Staggered Bolt Mounting Plate; Power Output:1.7 Kilo Watts
- High-Torque Starter; Gear Reduction Type; Hitachi Style; Staggered Mount Type; Fits Chevy V8 Engines; Cast Aluminum Mount; For 10.1:1 Compression Ratio Engines; 100% New Components; Natural Finish;
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 10 : 1
- Part Type: Starter Motor
- Make: Chevrolet
- Category: Starters
- Power Output: 1.7 Kilo Watts
- Mounting Plate: Staggered Bolt Mounting Plate
- Applications: Chevy Small Block Engines And Chevy Big Block Engines
- Flywheel Tooth Number: 168-tooth
- Weight: 8.3 Lbs.
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet G20 | V | - | 6 Cyl 4.3L | 262 |
- Wedge-Locking Header Bolts; Hex Head; 3/8 dia. X 1in Black Oxide ; 12 Pcs
- Hex Head; 3/8 dia. X 1in Black Oxide
- Engine Header Bolts; Wedge-Locking Technology; Hex Head Type; 3/8-16 Thread X 1 Inch Long; Black Oxide Finish; 12 Pcs in kit; Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Diameter: 3/8-in.
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Length: 1 Inch
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Part Type: Header Bolts
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet G20 | V | - | 6 Cyl 4.3L | 262 |
- High-Torque Starter; Gear Reduction Type; 1.4KW; Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 1.4KW; Compression Ratio:11 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- High-Torque Mini Starter; Gear Reduction Type; 1.4KW; Fits All Chevy V8 Engines; Billet Aluminum Mount; For 11.1:1 Compression Ratio Engines; 100% New Components; Offset Design for More Oil Pan Clearance; Black and Silver Finish; Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Category: Starters
- Power Output: 1.4 Kw
- Feature/Benefit: High-torque, Gear-reduction Design.
- Applications: Chevy Small Block Engines, Chevy Big Block Engines And Chevy V6 Engines
- Compression Ratio: 11 : 1
- Mounting Plate: Straight Bolt Mounting Plate
- Part Type: Starter Motor
- Flywheel Tooth Number: 153 & 168-tooth
- Make: Chevrolet
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations. Fits all Chevy V6 and small and big block V 8 engines using 153 or 168 tooth flywheels. Heavy-duty PROFORM P/N 66258 weighs 1-1/2 lbs. more and is 1" longer than P/N 66256.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet G20 | V | - | 6 Cyl 4.3L | 262 |
- High-Torque Starter; Gear Reduction Type; 2.2KW; Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 2.2KW; Compression Ratio:15 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- High-Torque Mini Starter; Gear Reduction Type; 2.2KW; Fits All Chevy V8-V6 Engines; Billet Aluminum Mount; For 15.1:1 Compression Ratio Engines; 100% New Components; Offset Design for More Oil Pan Clearance; Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Category: Starters
- Power Output: 2.2 Kilo Watts
- Feature/Benefit: High-torque, Gear-reduction Design.
- Applications: Chevy V6 Engines, Chevy Small Block Engines And Chevy Big Block Engines
- Compression Ratio: 15 : 1
- Mounting Plate: Straight Bolt Mounting Plate
- Part Type: Starter Motor
- Flywheel Tooth Number: 153 & 168-tooth
- Make: Chevrolet
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet G20 | V | - | 6 Cyl 4.3L | 262 |
- Engine Water Pump; Mechanical Short Style; High Flow Model; Satin; SB Chevy
- Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Satin
- Engine Water Pump; Fits Small Block Chevy Engines; High-Flow Model; Mechanical Type; Short Style Pump; Made from High-Quality Aluminum; Satin Finish; Heavy-Duty Ball Bearings; Sold Each
- Product Attributes:
- Rotation: Standard
- Category: Mech. Water Pump
- Feature/Benefit: Lightweight Aluminum
- Length: Short
- Applications: Chevy Small Block Engines
- Flow Rate: 25 Gpm
- Part Type: Water Pump
- Tool Type: Piston Installation Tools
- Make: Chevrolet
- PROFORM's new high flow mechanical water pumps feature heavy duty ball bearings for up to 40% more coolant flow giving you real performance value for your dollar. Aluminum construction reduces front end weight!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet G20 | V | - | 8 Cyl 5.0L | 305 |
- High-Torque Starter; Gear Reduction Type; High Compression; Chevy V8; 168 Tooth
- High-Torque Starter; High Compression; Compression Ratio:14 : 1; Finish:Natural; Flywheel Tooth Number:168-Tooth; Gear Reduction Ratio:4.41:1; Material:Aluminum/Steel; Mounting Plate:Staggered Bolt Mounting Plate; Power Output:1.9 Kilo Watts
- High-Torque Mini Starter; Gear Reduction Type; High Compression Racing Staggered Style; Fits All Chevy V8 Engines with 168 Tooth Flywheel; Staggered Mount; For 14:1 Compression Ratio; 100% New; Offset For Pan Clearance; Natural Finish
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 4.41:1
- Category: Starters
- Power Output: 1.9 Kilo Watts
- Feature/Benefit: For Engines With Monster Cubic Inches Or Compression Ratios, These 100% New Starters Challenge The Specifications, Durability, And Reliability Of Anything On The Market.
- Applications: Chevy Small Block Engines And Chevy Big Block Engines
- Compression Ratio: 14 : 1
- Mounting Plate: Staggered Bolt Mounting Plate
- Part Type: Starter Motor
- Flywheel Tooth Number: 168-tooth
- Make: Chevrolet
- For engines with monster cubic inches or compression ratios, these 100% NEW starters challenge the specifications, durability, and reliability of anything on the market. Built from scratch with all-new components, the torque rating is a healthy 4.41:1 gear reduction, capable of cranking engines up to a whopping 14:1 compression. Comes in the NEW Race Box Packaging! Fits Chevy small and big block engines. Fits Chevy V8.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet G20 | V | - | 6 Cyl 4.3L | 262 |
- Spark Plug Wire Loom Set; Universal; Chrome; Black Plastic; Bowtie Logo; 1-Pair
- Emblem:Chevy Bowtie Emblem
- Spark Plug Wire Loom Set; Universal Valve Cover Mount For Chevy V8 Engines; Fit 7mm-8mm Spark Plug Wires; Chrome Plated Finish With Black Plastic Separators; Features Red Chevy and Bowtie Logos; Sold As One Pair
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Wire Looms - Black
- Feature/Benefit: Using The Divisional Red Color, The Chevrolet Name And Bowtie Emblem Are Molded Onto The Black Nylon Head Of Each Wire Loom, Mounted On Chrome Stems.
- Using the divisional red color, the CHEVROLET name and Bowtie Emblem are molded onto the black nylon head of each wire loom, mounted on chrome stems. Fits Chevrolet small-block V8, 1959-86 and Chevrolet big-block V8 1965-91. 4-wire looms, 2 per package.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet G20 | V | - | 8 Cyl 5.0L | 305 |
- Engine Valve Cover Holdown Clamps; Chrome with Red Bowtie Logo; SB Chevy; 4 Pcs
- Chrome with Red Bowtie Logo; SB Chevy
- Engine Valve Cover Holdown Clamps; Chrome Plated Finish With Red Bowtie Logo; Fits 1955-1986 262-400 Small Block Chevy V8 and V6 Engines; Made From High-Quality Steel; Officially Licensed GM Performance Product; Sold As One Set of 4 Pieces
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Hold-down Clamps
- Feature/Benefit: Premium Street Performance Chrome Hold-down Clamps With Distinctive Look And Boldly Striking Bowtie Emblems, Inlaid With Classic Chevrolet Red.
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986; Chevy V6 Engines; Chevy Big Block 396 To 454 Engines 1965 To 1996
- Part Type: Valve Cover Holdown Clamps
- Emblem Style: Recessed Red & Black Emblem
- Premium Street Performance Chrome hold-down clamps with distinctive look and boldly striking Bowtie Emblems, inlaid with classic Chevrolet red. By spreading the load over a wider area, this clamp minimizes distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage. Fits Chevrolet small-block V8 and V6/90 engines through 1986. 4 per package.
Additional Fitment Information:
| Vehicle |
|---|
| 1994 - Chevrolet G20 |
- Engine Valve Covers; Center Bolt Style; Steel; Black w/Bowtie Logo; SB Chevy
- Center Bolt Style;SB Chevy; Mounting Bolt(s) Included:No; Emblem:CHEVROLET and Bowtie Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Stock; Finish:Black Crinkle; Material:Stamped Steel
- Engine Valve Cover; Baffled; Center Bolt Style; Black Crinkle Finish With Red Chevy and Bowtie Logos; Fits 1987 to 2000 305-350 Small Block Chevy Engines; Made From Quality Steel Material; Officially Licensed GM Product; Sold As One Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- PCV Grommet Included: Yes
- Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers.
- Engine: Chevy Sb Gen 2 Vortec
- Breather Grommet Included: Yes
- Make: Chevrolet
- Valve Cover Bolt Pattern: Center Bolt
- Valve Cover Height: Stock
- Technical Note: Stock Height Chevy Small Block Valve Covers Will Not Clear Valve Trains Using Stud Girdles
- Baffeled: Yes
- Category: Valve Covers
- Applications: Chevy Small Block Engines 1987 To Pre Ls
- Mounting Bolt(s) Included: No
- These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. These valve covers bear the powerful Bowtie Emblem. These stamped valve covers are offered in production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy small-block valve covers and valve covers with baffles will not clear most stud girdle applications. Fits Chevy small-block engines 1987 to current.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet G20 | V | - | 8 Cyl 5.0L | 305 |
- Engine Valve Covers; Center Bolt Style; Die Cast; Polish w/Bowtie Logo; SB Chevy
- Center Bolt Style;Polish w/Bowtie Logo; SB Chevy; Mounting Bolt(s) Included:Yes; Emblem Style:Recessed Red and Black Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Tall; Material:Die Cast Aluminum
- Engine Valve Cover; Baffled; Center Bolt Style; Polished Finish With Chevy and Bowtie Logos; Fits 1987 to 2000 305-350 Small Block Chevy Engines; Made From Quality Die Cast Material; Officially Licensed GM Product; Sold As One Pair
- Product Attributes:
- Emblem: Chevrolet & Bowtie Emblem
- PCV Grommet Included: Yes
- Feature/Benefit: New Larger Emblem.
- Engine: Chevy Sb Gen 2 Vortec
- Part Type: Valve Cover
- Breather Grommet Included: Yes
- Make: Chevrolet
- Valve Cover Bolt Pattern: Center Bolt
- Valve Cover Height: Tall
- Baffeled: Yes
- Category: Valve Covers
- Applications: Chevy Small Block Engines 1987 To Pre Ls
- Emblem Style: Recessed Red & Black Emblem
- Mounting Bolt(s) Included: Yes
- New Larger Emblem. Late-Model Die-Cast Aluminum Valve Covers, 1987-current. Center hold-down, tall. Supplied with mounting bolts, steel and rubber washers (also available separately as 141-133). All valve covers sold in pairs.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1994 - Chevrolet G20 | V | - | 8 Cyl 5.0L | 305 |
Showing 1 - 10 of 22 products
Loading...