1993 GMC C1500 Rough Country Parts
Choose your Engine for your 1993 GMC C1500
Image
Product
Price
- 2 in. Lift; Includes Coil Springs; Ball Joint Spacer; Blocks; U-Bolts; Hardware; Front and Rear Premium N3 Shocks Superseded From PN[230.20]
- Suspension Lift Kit w/Shocks; 2 in. Lift; Includes Coil Springs; Ball Joint Spacer; Blocks; U-Bolts; Hardware; Front and Rear Premium N3 Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 2 In.
- WARNING CA Proposition 65: No
-
Features:
- Incredible Ride Quality And Performance
- Includes Application Valved N3 Series Shock Absorbers
- Suspension Lift Kit w/Shocks; 2 in. Lift; Includes Coil Springs; Ball Joint Spacer; Blocks; U-Bolts; Hardware; Front and Rear Premium N3 Shocks;
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - GMC C1500 | V | - | 6 Cyl 4.3L | 262 |
- 2 in. Block And Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black
- U-Bolt Kit; 2 in. Block And U-Bolt Kit; Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black;
- U-Bolt Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fabricated Steel Blocks Are Stronger And Offer A Longer Lifespan
- Tapered To Reduce Drive Shaft Angle
- Single 9/16 in. Pin Blocks
- 2.5 in. Wide
- Powder Coated Black
- U-Bolts Are E-Coated Black
- Corrosion Resistant
- Has the rear of your vehicle started to sag, or are you looking to add a bit of lift height? Whatever the case maybe we have you covered at Rough Country. Upgrade your rear suspension with Rough Countrys vehicle-specific block and U-bolt kit! Rough Countrys rear block and U-bolt kits provide a simple remedy to an age-old problem that simply happens over the span of your vehicle lift. Each kit offers two fabricated steel blocks that are tapered to reduce driveline angles and are much stronger than the standard cast block option. These heavy-duty replacements feature a single pin measuring in a 9/16- in. to snuggle fit into your factory axle pad. Also included is a set of e-coated corrosion-resistant steel U-bolts. Our U-bolts offer four inches of thread ensuring that you have plenty of length to securely install this kit to the rear of your vehicle in no time flat. Best of all, Rough Countrys vehicle-specific kits are backed by Rough Countrys Satisfaction Guarantee!
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - GMC C1500 |
- Includes Shackles Bushings; Hardware Rear; 1-2.5 in. Drop~Install Time 1-2 Hours
- Lowering Shackles; Includes Shackles Bushings; Hardware;
- Lowering Shackles
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- 100 pct. Bolt-on Installation
- Maintains Factory Ride Quality
- Fine Tune The Stance Of Your Truck
- Lower the rear of you GM/F-150 with Rough Countrys 1-2.5in lowering shackles! From the factory, your GM/F-150 sits lower in the front than the rear. This economical and simple lowering shackle makes it easy to reduce the amount of rear height, giving you a level look from front to back for an drastically improved appearance. Installation has never been easier. Rough Countrys lowering shackles offer two mounting holes for installation allowing your truck to be lowered 1-2.5 inches. These heavy duty shackles are constructed of .25 steel offering O.E. style rubber bushings to face the road ahead. Best of all Rough Countrys lowering shackles are back by Rough Countrys Lifetime Replacement Guarantee!
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - GMC C1500 | Rear |
- 2 in.; Lowering Spindles; Grade 9 Hardware; Hardened Washers;Front w/2 in. Drop And Rear w/2 in. Drop
- Lowering Kit; 2 in.; Lowering Spindles; Grade 9 Hardware; Hardened Washers;
- Lowering Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Drops The Front 2 in. And The Rear 2 in.
- Can Be Fully Realigned To Factory Specs
- Can Be Returned To Stock Height
- Includes Grade 9 Hardware And Hardened Washers
- Lowering Kit; 2 in.; Lowering Spindles; Grade 9 Hardware; Hardened Washers;
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - GMC C1500 | Front and Rear |
- 6 in. Lift; Includes Spindles; Lift Blocks; Coil Springs; U-Bolts; Hardware; Front and Rear Premium N3 Shocks
- Suspension Lift Kit w/Shocks; 6 in. Lift; Includes Spindles; Lift Blocks; Coil Springs; U-Bolts; Hardware; Front and Rear Premium N3 Shocks;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: No
-
Features:
- Increased Ground Clearance
- Fabricated Blocks Are Stronger
- Offer A Longer Lifespan Than Cast Blocks
- New Coil Springs Breath Life Back Into Older Suspension.
- Includes Application Valved N3 Series Shock Absorbers
- Offer The Best In Balanced Performance For On And Off-road Use
- Get a total transformation for your truck with Rough Countrys 6- in. Suspension Lift for 88-98 2WD 1500 pickups. This kit offers enough clearance to run 33x12.50 tires for an improved, aggressive look and better off-road performance.Rough Countrys 6- in. Suspension Lift maintains an incredible ride quality. Each kit includes a set of durable coil springs that provide a smooth ride and enhanced vibration damping - a fantastic improvement over the aging factory springs! This kit also includes Rough Countrys premium N3 shocks. These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN tensile strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.Includes a Lifetime Replacement Guarantee!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - GMC C1500 | V | - | 6 Cyl 4.3L | 262 |
- 4 in. Lift Install Time 4-6 Hours~Includes The Following Parts~U-Bolts~Necessary Installation Hardware~Lift Blocks~Front And Rear Premium N2.0 Series Shocks~Lifted Spindles
- Suspension Lift Kit w/Shocks; 4 in. Lift;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: No
-
Features:
- Increased Ground Clearance
- Maintains Factory Ride Quality
- Includes Application Valved N3 Series Shock Absorbers
- Offer The Best In Balanced Performance For On And Off-road Use
- Suspension Lift Kit w/Shocks; 4 in. Lift;
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - GMC C1500 | V | - | 6 Cyl 4.3L | 262 |
- 20x10 [5x5/5x4.5]
- One-Piece Series 93 Wheel; 20x10 [5x5/5x4.5];
- One-Piece Series 93 Wheel
- Product Attributes:
- WARNING CA Proposition 65: No
- Wheel Width: 20
- Size: 20x10
- Wheel Diameter: 10
- Offset: Negative 18mm
- Backspace: 4.75
- Bolt Pattern:
- 5x4.5
- 5x5
-
Features:
- Matte Black W/milled Accents Finish
- 7-spoke Design
- Single-piece Aluminum Construction
- Includes A Rough Country Carbon Fiber Design Center Cap
- Limited Lifetime Structural Warranty
- Set yourself apart from the pack with Rough Countrys One-Piece Series 93 Wheels. This 7-spoke black and machined wheel offers an incredible look thats sure to turn heads. This one-of-a-kind wheel features 7 spokes that flare out near the lip for a dramatic visual style thats perfect for any lifted vehicle. This stylish wheel features a gloss black coat with machined accents that pop under any truck or Jeep.Rough Countrys Series 93 is a one-piece wheel design, constructed from a single piece of heavy-duty aluminum for the optimal balance of weight and performance. Each Series 93 Wheel includes dual machined 'œRough Country' logos and a center cap with 'œRC' carbon fiber logo design and includes a limited lifetime warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - GMC C1500 |
- 3 in. Lift; Includes Body Lift Pucks; Bumper Brackets; Steering Extension; Hardware
- Body Lift Kit; 3 in. Lift; Includes Body Lift Pucks; Bumper Brackets; Steering Extension; Hardware;
- Body Lift Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Includes Steering Extension
- Body Lift Pucks Are Made From Fiberglass Reinforced Nylon
- For Superior Strength And Durability
- Take your truck to new heights with Rough Countrys 3- in. body lift for 88-94 Chevy / GMC Pickups! This all-inclusive body lift kit comes with everything you need to gain additional ride height at a fantastic price, with no unsightly bumper gaps often found on inferior kits!This simple solution provides enough wheel well clearance to run up to 33x12.50 tires, and works great with factory or aftermarket wheels! Each kit includes a series of durable, fiberglass reinforced, Nylon body pucks for a lifetime of unyielding performance. This kit also includes front and rear Bumper relocation brackets which relocate the bumpers to sit flush with the body of the vehicle. This fantastic feature eliminates the odd-looking bumper gap seen in other inferior kits. This kit also features a steering extension to ensure your factory components remain at the optimum angle after lifting. Best of all, Rough Country Body Lift Kits feature a lifetime Replacement Guarantee!
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - GMC C1500 |
- Includes Mounting Brackets and Hardware Superseded From PN[87386.20]
- N3 Steering Stabilizer; Includes Mounting Brackets and Hardware;
- N3 Steering Stabilizer
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-on Installation.
- Improves Control And Handling.
- Reduces Bump Steer.
- Reduces Tie Rod And Ball Joint Wear And Tear.
- Chrome Hardened 9/16 in. Piston Rod
- Steering stabilizers are designed to restrain in bump steering in and front end vibration, giving added life to tires, ball joints and other steering components and are highly recommended for vehicles running aftermarket tires. The durable 18mm chrome hardened piston rod and large-bodied cylinder dwarfs factory equipment, ensuring a more effective vibration damping each and every time you take to the trails. Rough Countrys N3 Steering Stabilizer kit is easy to install, with a 100 % bolt-on installation process that can be installed in a home garage with common tools.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1993 - GMC C1500 | Front |
- Pair; 2 in. Drop; Includes Grade 9 Hardware; Hardened Washers Install Time 2-3 Hours
- Drop Spindles; Pair; 2 in. Drop; Includes Grade 9 Hardware; Hardened Washers;
- Drop Spindles
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Drops The Front 2 in.
- Can Be Fully Realigned To Factory Specs
- Can Be Returned To Stock Height
- Includes Grade 9 Hardware And Hardened Washers
- Drop Spindles; Pair; 2 in. Drop; Includes Grade 9 Hardware; Hardened Washers;
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - GMC C1500 |
Showing 1 - 10 of 22 products
Loading...