1986 Chevrolet K10 Skyjacker Parts
Choose your Engine for your 1986 Chevrolet K10
Image
Product
Price
- HYDRO SHOCK W/RED BOOT
- 34 in. Extended; 20.27 in. Collapsed; w/10 - 9 in. Lift
- HYDRO SHOCK W/RED BOOT
- Hydro Shock Absorber
- Product Attributes:
- Collapsed Length: 20.270 In.
- Shock Stroke: 13.730 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 34.000 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Multi-Stage Velocity Sensitive Valving
- Twin Tube Construction
- 5/8 in. Diameter Hardened And Double Chrome Rod
- Red Polyurethane Bushings
- Includes Red Boot 15 Other Colors Available
- Limited Lifetime Warranty
- Skyjacker(R) Suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S., control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the ‘shock' of bumps and suspension loading is actually performed by the springs in the suspension. The shock's real job is controlling the energy stored in the springs.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1986 - Chevrolet K10 | V | - | Rear | 6 Cyl 4.3L | 262 |
- FRT BRAKE LNS 79-87 GM; 3-4IN.
- 7200 GVWR Or Less; Lift Height 3-4 in.; Pair
- FRT BRAKE LNS 79-87 GM;3-4in.
- Stainless Steel Brake Line Front
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
- Overall Length: Oem
- Fitting Type: Oem
-
Features:
- DOT Certified/European T.U.V. Approved
- Stainless Steel Braided
- Heavy Duty Offroad Brass Fitting
- Outer Extruded Polyurethane Coating
- Street Legal In 50 States
- Limited Lifetime Warranty
- Skyjackers stainless Steel Brake Lines are the perfect addition to a suspension kit or to just up grade your braking system. Choose from their universal and factory replacements.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Chevrolet K10 | Front |
- SOFTRIDE FRONT SPRING/6IN. GM
- Lift Height 6 in.; Single
- SOFTRIDE FRONT SPRING/6in. GM
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Chevrolet K10 | Front |
- FRT BRAKE LNS 79-87 GM; 5-8IN.
- 7200 GVWR Or Less; Lift Height 6-8 in.; Pair
- FRT BRAKE LNS 79-87 GM;5-8in.
- Stainless Steel Brake Line Front
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
- Overall Length: Oem
- Fitting Type: Oem
-
Features:
- DOT Certified/European T.U.V. Approved
- Stainless Steel Braided
- Heavy Duty Offroad Brass Fitting
- Outer Extruded Polyurethane Coating
- Street Legal In 50 States
- Limited Lifetime Warranty
- Skyjackers stainless Steel Brake Lines are the perfect addition to a suspension kit or to just up grade your braking system. Choose from their universal and factory replacements.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Chevrolet K10 | Front |
- FITTED LEAFS FOR C125; PR
- Lift Height 2.5 in.; For Use w/PN[C125] Softride Leaf Spring; Pair
- FITTED LEAFS FOR C125;PR
- Fitted Leaf
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Fitted Leafs are designed as an option Exclusively for Skyjacker(R)Softride(R) Lifted Leaf Springs. These are used when the additional weight of aftermarket accessories are installed such as a heavy w in. bumper, swing tire carrier, or all your extra gear.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Chevrolet K10 | Front |
- SOFTRIDE REAR SPRG/6IN. GM
- Lift Height 6 in.; Single
- SOFTRIDE REAR SPRG/6in. GM
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Chevrolet K10 | Rear |
- STEERING ARM 69-87GMC/CHEVY
- Lift Height 4-8 in.
- STEERING ARM 69-87GMC/CHEVY
- Steering Arm
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Transfers Motion From The Drag Link To Knuckle
- Limited Lifetime Warranty
- Skyjacker not only builds great lift kits, they know and understand what it takes to make your truck work properly and safely while gaining some altitude. That is why they have engineered these heavy-duty steering components to keep your trucks steering operating the way it should.
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Chevrolet K10 |
- SOFTRIDE REAR SPRG/4IN. GM
- Lift Height 4 in.; Single
- SOFTRIDE REAR SPRG/4in. GM
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1986 - Chevrolet K10 | Rear |
- 2.5IN. SWAY BAR LWRG BRACKETS
- Front; Lift Height 3-6 in.
- 2.5in.SWAY BAR LWRG BRACKETS
- Sway Bar Relocation Bracket
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Sway Bar Lowering Kit
- Limited Lifetime Warranty
- Skyjacker sway bar relocation brackets are designed to connect the factory sway bar to a vehicle that has a suspension lift. They are made of steel and include the necessary mounting hardware for installation on lifted vehicles.
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Chevrolet K10 |
- 4IN. SR 73-87 GM 1/2 W/REAR SP
- 4 in. Lift; Includes Front/Rear Leaf Springs; Front/Rear U Bolt Kits; Bushing Kit Optional 4 in. Offset Drag Link Available PN[GMDL4]~Lwrng Brkts Must Be Ordered If Equip w/Frt Swy Bar
- 4in.SR 73-87 GM 1/2 W/REAR SP
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Other Parts Required For A Complete Set
- Components Powder Coated Black To Resist Corrosion
- Greater Level Of Performance
- Limited Lifetime Warranty
- Skyjacker Suspensions suspension lift kits provide a smooth, comfortable ride, while responding to on or off-road conditions. They help you get the right height, clearance, and attitude on your truck and maintain that factory ride quality, while improving handling. They come with all of the necessary mounting hardware and detailed instructions, and are available for 2WD or 4WD vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Chevrolet K10 | V | - | 6 Cyl 4.3L | 262 |
Showing 1 - 10 of 52 products
Loading...