Image
Product
Price
- DIFFERENTIAL COVER BOLT
- with Dana 44 Axle with Dana 44 Axle(s)
- FSGR
- Product Attributes:
- Thread Size: .312-18
- Self Locking: Y
- Head Style: Hex
- Length Under Head (In): 0.625
- Grade: 5
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5738663, DS34279, N155154
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1972 - Ford Bronco | Front |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1972 - Ford Bronco | Front Driveshaft - CV at Transfer Case | 4WD |
- Ball Joint Kit - Upper/Lower (One Side)
- with Dana 44 Axle with Dana 44 Axle(s)
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Location: Upper/lower
- Greasable: N
- Adjustable: N
- Ball Joint Kit: Y
- Axle Model: Dana 30/44
-
Features:
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Includes upper and one lower ball joint, one lower ball joint and hardware
- Genuine OE quality. Tested and proven.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
16378083, 28065X, 3894976, 706107X, 706136X, 706145X, 706196X, 816753, DS706116X, J8124333
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1972 - Ford Bronco | Front |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1972 - Ford Bronco | Front Driveshaft at Front Axle | 4WD |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1972 - Ford Bronco | Rear Driveshaft at Rear Axle | 4WD |
- Differential Gear Set - DANA 44 4.56 RATIO
- with 4.56 Gear Ratio with Dana Model 44 Axle
- FSGR
- Product Attributes:
- Axle Type: Semi Floating
- Ring Teeth Count: 50
- Gear Ratio: 4.55
- Ring Gear Diameter (In.): 8.500
- Pinion Gear Included: Y
- Ring Gear Included: Y
- Axle Model: Dana 44
- Ring Gear Bolt Qty: 10
- Pinion Shaft Diameter: 0.983
- Ring Gear Rotation: Standard
- Include Installation Kit: Y
- Pinion Spline Count: 26
- Carrier Breaks: 3.92 And Up
- On Vehicle Location: Rear
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 11
- Ring Gear Bolt Thread In.: .375-24
-
Features:
- All Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
- Lapped to reduce noise and heat. Lubrication process allows for no break in period.
- Precision heat-treating and shot-peening delivers consistent quality, enhanced life by reducing residual stress doubling the fatigue life of the gear
- High-grade steel for maximum durability
- All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.
This Part Fits the Following OEM/Substitute Numbers:
15584145, 3634301, 4506120, 83503087, D44456, DS221055X, YGD44456
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1972 - Ford Bronco | Front |
- Ball Joint Kit - Upper/Lower (One Side)
- with Dana 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Location: Upper/lower
- Greasable: N
- Adjustable: N
- Ball Joint Kit: Y
- Axle Model: Dana 30/44
-
Features:
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Includes upper and one lower ball joint, one lower ball joint and hardware
- Genuine OE quality. Tested and proven.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1972 - Ford Bronco | Front |
- Universal Joint Greaseable 1310 Series OSR
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02362830, 031468, 04371-04010, 04371-04020, 04371-0C010, 0437104010, 0437104020, 043710C010, 04723072, 051025Z1546, 051025Z3207, 055-0737, 06-06-1242, 1-0153, 1-0153G, 1-0154, 1-0200, 1-0278...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1972 - Ford Bronco | Rear Driveshaft at Rear Axle |
- DOUBLE CARDAN CV CENTERING YOKE; GREASABLE; CENTERLINE TO END 1.531in
- From Serial #(s) G70001 Greasable Greaseable with CV Centering Yoke Kit
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Yoke Style: 3
- Bolt Circle Diameter (In): 3.218
- Series: 1310
- Bolt Hole Distance (In) B: 2.343
- Bolt Hole Diameter (In) C: .312-24
- Bolt Hole Distance (In) A: 1.500
- Ctr To Flange Dimension (In) E: 1.531
- Greaseable: Y
- Fits Ball Stud Size (In): 0.500
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
This Part Fits the Following OEM/Substitute Numbers:
032755, 04384663, 06258549, 131NCV82HD, 2104-211355X, 211355 X, 211355X, 211355XR, 211355XSB, 2GN979, 4400002, 45U0801, 607, 7-0082, AT68670, D211355X, D2TZ-4782-A, DS211355X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1972 - Ford Bronco | Transfer Case To Front Axle | 4WD |
- DOUBLE CARDAN CV CENTERING YOKE; GREASABLE; CENTERLINE TO END 1.531in
- From Serial #(s) G70001 Greasable Greaseable with CV Centering Yoke Kit
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Yoke Style: 3
- Bolt Circle Diameter (In): 3.218
- Series: 1310
- Bolt Hole Distance (In) B: 2.343
- Bolt Hole Diameter (In) C: .312-24
- Bolt Hole Distance (In) A: 1.500
- Ctr To Flange Dimension (In) E: 1.531
- Greaseable: Y
- Fits Ball Stud Size (In): 0.500
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1972 - Ford Bronco | Transfer Case To Rear Axle | 4WD |
Showing 1 - 10 of 38 products
Loading...