Image
Product
Price
- Drive Axle Shaft Universal Joint
- Non-Greasable with Inside Snap Rings with Uncoated
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Isr
- Model Number: Spicer 1310wj
- Snap Ring (2): 2.188
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: N
- Bearing Cap Diameter (1): 1.188
- SR(1)Brng Cap to Brng Cap(OSR): 2.188
- Bearing Cap Diameter A (mm): 1.188
- Snap Ring (1): 2.188
- Length B (mm): 55.6
- SR(2)Brng Cap to Brng Cap(OSR): 2.188
- Pre Greased: Y
- Seal Material: Rubber
- Grease Zerk Included: Not Required
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1310wj
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 55.6
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0297, 1-0298, 371, 377, 45U0104, 45U0114, 5-3226X, CP2971X, UJ371, UJ377
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1981 - Ford F-350 | Front Axle at Wheels | 4WD |
- with Uncoated Non-Greasable with Inside Snap Rings
- HGVF
- Product Attributes:
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310wj
- Length B (mm): 55.6
- SR(2)Brng Cap to Brng Cap(OSR): 2.188
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Pre Greased: Y
- Seal Material: Rubber
- Grease Zerk Included: Not Required
- Coating Type: None
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1310wj
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 55.6
- SR(1)Brng Cap to Brng Cap(OSR): 2.188
- Bearing Cap Diameter A (mm): 1.188
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1981 - Ford F-350 | Front Axle at Wheels | 4WD |
- SPINDLE NUT - OUTER
- with Dana Model 50 Axle with Reverse Rotation without Pin
- FSGR
- Product Attributes:
- Self Locking: N
- Flange Diameter: 63.31mm
- Material: Steel
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1981 - Ford F-350 | Front |
- Axle Shaft Seal
- Replaces OE Part Number(s) F81Z-1175-HA, F81Z-1175-HC with Dana 60 Axle
- FSGR
- Product Attributes:
- Axle Model: Dana 60
- Material: Rubber
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2510566C1, 88967017, DS50381, F81Z-1175-HA, F81Z-1175-HC
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1981 - Ford F-350 | Front Inner |
- Axle Shaft Seal
- Replaces OE Part Number(s) F81Z-1175-HA, F81Z-1175-HC with 3.112in Outside Diameter with Dana 60 Axle
- FSGR
- Product Attributes:
- Axle Model: Dana 60
- Material: Rubber
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1981 - Ford F-350 | Front Inner |
- Axle Shaft Seal
- 3.112in Outside Diameter Replaces OE Part Number(s) F81Z-1175-HA, F81Z-1175-HC with Dana 60 Axle
- FSGR
- Product Attributes:
- Axle Model: Dana 60
- Material: Rubber
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1981 - Ford F-350 | Front Inner |
- SPINDLE NUT WASHER; LOCK WASHER
- Inside Diameter 50.95mm Outside Diameter 65,69mm Replaces OE Part Number(s) E5TZ-1198-A with Dana 50 Axle with Reverse Rotation
- FSGR
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Tested and validated to rigorous OE specifications
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
This Part Fits the Following OEM/Substitute Numbers:
1403358, 15582235, 4723089, 5005303-3, DS621028, E5TZ-1198-1
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1981 - Ford F-350 | Front Outer |
- SPINDLE NUT - OUTER
- with Dana Model 50 Axle with Reverse Rotation without Pin
- FSGR
- Product Attributes:
- Self Locking: N
- Flange Diameter: 63.31mm
- Material: Steel
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
This Part Fits the Following OEM/Substitute Numbers:
1403356, 4723087, DS621027
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1981 - Ford F-350 | Front |
- Drive Axle Shaft Universal Joint
- Non-Greasable with Blue Coated with Inside Snap Rings
- HGVF
- Product Attributes:
- Snap Ring (1): 2.188
- Snap Ring (2): 2.188
- SR(2)Brng Cap to Brng Cap(OSR): 2.188
- Pre Greased: Y
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Series: 1310wj
- OEM Mfg: Spicer
- Snap Ring Included: Y
- Snap Ring Type: Internal
- SR(1)Brng Cap to Brng Cap(OSR): 2.188
- Demand genuine Spicer. Made in the USA. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0297, 1-0298, 371, 377, 45U0104, 45U0114, 5-3226X, 5-760X, CP2971X, UJ371, UJ377
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1981 - Ford F-350 | Front Axle at Wheels | 4WD |
- with Inside Snap Rings Non-Greasable with Blue Coated
- HGVF
- Product Attributes:
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1310wj
- SR(2)Brng Cap to Brng Cap(OSR): 2.188
- Snap Ring Included: Y
- Pre Greased: Y
- Snap Ring Type: Internal
- SR(1)Brng Cap to Brng Cap(OSR): 2.188
- Greaseable: N
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1981 - Ford F-350 | Front Axle at Wheels | 4WD |
Showing 1 - 10 of 76 products
Loading...