1981 Jeep J20 Spicer Parts

Showing 1 - 10 of 35 products
Image
SKU
Product
Rating
Price

Spicer
  • Wheel End Spindle Lock Washer
  • with Dana 44 Front Axle 1.640in Inside Diameter x 2.180in Outside Diameter with 0.125in Width with 16 Outer Holes
  • FSGR
  • Product Attributes:
    • Inner Diameter: 1.645
    • Outer Diameter: 2.170
    • Thickness: 0.123
  • Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
816671, DS36569

Additional Fitment Information:
Vehicle
1981 - Jeep J20

Spicer
  • Universal Joint
  • 1.062in Bearing Cap Diameter Non-Greasable with 3.219in Outside Snap Ring Dimension
  • HGVF
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Bearing Cap Type: Round
    • Bearing Cap Type B: Osr
    • Snap Ring (1): 3.219
    • Snap Ring (2): 3.219
    • Length B (mm): 81.8
    • SR(2)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Type A: Osr
    • Greaseable: N
    • Length B (In): 3.219
    • Bearing Cap Diameter (2): 1.062
    • Bearing Cap Diameter (1): 1.062
    • OEM Mfg: Spicer
    • OEM Series: 1310/spl22
    • Bearing Cap Diameter B (mm): 1.062
    • Length A (In): 3.219
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 81.8
    • SR(1)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Diameter A (mm): 1.062
  • You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE

Additional Fitment Information:
Vehicle Position
1981 - Jeep J20 Front Driveshaft at Front Axle

Spicer
  • with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
  • HGVF
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Bearing Cap Type B: Osr
    • Grease Type: N.l.g.i. Grade 2
    • Model Number: Spicer 1310/spl22
    • Bearing Cap Finish: Ground
    • Bearing Cap Type A: Osr
    • Greaseable: Y
    • Length B (In): 3.219
    • Bearing Cap Diameter (1): 1.062
    • Length A (In): 3.219
    • Grease Fitting Location: One Lube Fitting In Bearing
    • SR(1)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Diameter A (mm): 1.062
    • Bearing Cap Type: Round
    • Length B (mm): 81.8
    • SR(2)Brng Cap to Brng Cap(OSR): 3.219
    • Pre Greased: N
    • Seal Material: Rubber
    • Grease Zerk Included: Y
    • Coating Type: None
    • Bearing Cap Diameter (2): 1.062
    • OEM Mfg: Spicer
    • OEM Series: 1310/spl22
    • Bearing Cap Diameter B (mm): 1.062
    • Seal Color/Finish: Blue
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 81.8
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE

Additional Fitment Information:
Vehicle Position
1981 - Jeep J20 Front Driveshaft at Front Axle

Spicer
  • with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
  • HGVF
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Bearing Cap Type B: Osr
    • Grease Type: N.l.g.i. Grade 2
    • Model Number: Spicer 1310/spl22
    • Bearing Cap Finish: Ground
    • Bearing Cap Type A: Osr
    • Greaseable: Y
    • Length B (In): 3.219
    • Bearing Cap Diameter (1): 1.062
    • Length A (In): 3.219
    • Grease Fitting Location: One Lube Fitting In Bearing
    • SR(1)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Diameter A (mm): 1.062
    • Bearing Cap Type: Round
    • Length B (mm): 81.8
    • SR(2)Brng Cap to Brng Cap(OSR): 3.219
    • Pre Greased: N
    • Seal Material: Rubber
    • Grease Zerk Included: Y
    • Coating Type: None
    • Bearing Cap Diameter (2): 1.062
    • OEM Mfg: Spicer
    • OEM Series: 1310/spl22
    • Bearing Cap Diameter B (mm): 1.062
    • Seal Color/Finish: Blue
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 81.8
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

Additional Fitment Information:
Vehicle Position
1981 - Jeep J20 Rear Driveshaft at Transmission

Spicer
  • with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
  • HGVF
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Bearing Cap Type B: Osr
    • Grease Type: N.l.g.i. Grade 2
    • Model Number: Spicer 1310/spl22
    • Bearing Cap Finish: Ground
    • Bearing Cap Type A: Osr
    • Greaseable: Y
    • Length B (In): 3.219
    • Bearing Cap Diameter (1): 1.062
    • Length A (In): 3.219
    • Grease Fitting Location: One Lube Fitting In Bearing
    • SR(1)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Diameter A (mm): 1.062
    • Bearing Cap Type: Round
    • Length B (mm): 81.8
    • SR(2)Brng Cap to Brng Cap(OSR): 3.219
    • Pre Greased: N
    • Seal Material: Rubber
    • Grease Zerk Included: Y
    • Coating Type: None
    • Bearing Cap Diameter (2): 1.062
    • OEM Mfg: Spicer
    • OEM Series: 1310/spl22
    • Bearing Cap Diameter B (mm): 1.062
    • Seal Color/Finish: Blue
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 81.8
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

Additional Fitment Information:
Vehicle Position
1981 - Jeep J20 Rear Driveshaft at Rear Axle

Spicer
  • with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Non-Greasable
  • HGVF
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Bearing Cap Type: Round
    • Bearing Cap Type B: Osr
    • Length B (mm): 81.8
    • SR(2)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Type A: Osr
    • Greaseable: N
    • Length B (In): 3.219
    • Bearing Cap Diameter (2): 1.062
    • Bearing Cap Diameter (1): 1.062
    • OEM Mfg: Spicer
    • OEM Series: 1310/spl22
    • Bearing Cap Diameter B (mm): 1.062
    • Length A (In): 3.219
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 81.8
    • SR(1)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Diameter A (mm): 1.062
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

Additional Fitment Information:
Vehicle Position
1981 - Jeep J20 Rear Driveshaft at Transmission

Spicer
  • with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Non-Greasable
  • HGVF
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Bearing Cap Type: Round
    • Bearing Cap Type B: Osr
    • Length B (mm): 81.8
    • SR(2)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Type A: Osr
    • Greaseable: N
    • Length B (In): 3.219
    • Bearing Cap Diameter (2): 1.062
    • Bearing Cap Diameter (1): 1.062
    • OEM Mfg: Spicer
    • OEM Series: 1310/spl22
    • Bearing Cap Diameter B (mm): 1.062
    • Length A (In): 3.219
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 81.8
    • SR(1)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Diameter A (mm): 1.062
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

Additional Fitment Information:
Vehicle Position
1981 - Jeep J20 Rear Driveshaft at Rear Axle

Spicer
  • with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Non-Greasable
  • HGVF
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Bearing Cap Type: Round
    • Bearing Cap Type B: Osr
    • Length B (mm): 81.8
    • SR(2)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Type A: Osr
    • Greaseable: N
    • Length B (In): 3.219
    • Bearing Cap Diameter (2): 1.062
    • Bearing Cap Diameter (1): 1.062
    • OEM Mfg: Spicer
    • OEM Series: 1310/spl22
    • Bearing Cap Diameter B (mm): 1.062
    • Length A (In): 3.219
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 81.8
    • SR(1)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Diameter A (mm): 1.062
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

Additional Fitment Information:
Vehicle Position
1981 - Jeep J20 Front Driveshaft at Front Axle

Spicer
  • with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Non-Greasable
  • HGVF
  • Product Attributes:
    • California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
    • Bearing Cap Type: Round
    • Bearing Cap Type B: Osr
    • Length B (mm): 81.8
    • SR(2)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Type A: Osr
    • Greaseable: N
    • Length B (In): 3.219
    • Bearing Cap Diameter (2): 1.062
    • Bearing Cap Diameter (1): 1.062
    • OEM Mfg: Spicer
    • OEM Series: 1310/spl22
    • Bearing Cap Diameter B (mm): 1.062
    • Length A (In): 3.219
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 81.8
    • SR(1)Brng Cap to Brng Cap(OSR): 3.219
    • Bearing Cap Diameter A (mm): 1.062
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

Additional Fitment Information:
Vehicle Position
1981 - Jeep J20 Front Driveshaft - CV at Transfer Case

Spicer
  • Wheel Hub Mounting Stud
  • Replaces OE Part Number(s) J8124847 with Dana 44 Front Axle
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
    • Thread Size: .375-24
    • Self Locking: N
    • Head Style: Button
    • Length Under Head (In): 1.500
    • Grade: 8
  • Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
  • Suggested Purchase Quantity: 12
    • Most jobs typically require 12 of this item.

This Part Fits the Following OEM/Substitute Numbers:
DS363262

Additional Fitment Information:
Vehicle
1981 - Jeep J20
Showing 1 - 10 of 35 products

Loading...