1989 Dodge W100 Spicer Parts
Image
Product
Price
- Axle Shaft Flange Gasket
- with Dana 70 Axle
- FSGR
- Product Attributes:
- Quantity: 1
- Fitment: Outer Axle Flange
- Axle Model: Dana 60, Dana 70, Dana 80
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
DS39697
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W100 | Rear |
- 4WD Actuator Housing Cover Gasket
- with Dana 44 Axle
- FSGR
- Product Attributes:
- Fitment: Disconnect Housing
- Axle Model: Dana 30
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W100 | Front |
- Ball Joint Kit - Upper/Lower (One Side)
- with Dana 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Location: Upper/lower
- Greasable: N
- Adjustable: N
- Ball Joint Kit: Y
- Axle Model: Dana 30/44
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Includes upper and one lower ball joint, one lower ball joint and hardware
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
816753, DS706116X
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W100 | Front |
- Differential Cover Bolt
- with Dana 44 Axle with Dana 44 Axle(s)
- FSGR
- Product Attributes:
- Thread Size: .312-18
- Self Locking: Y
- Head Style: Hex
- Length Under Head (In): 0.625
- Grade: 5
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
This Part Fits the Following OEM/Substitute Numbers:
DS34279, N155154
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W100 | Front |
- Inside Snap Ring Dimension of 2.556in Non-Greasable 1.125in Bearing Cap Diameter 2 Piece Driveshaft with 2 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Isr
- Length B (mm): 64.9
- SR(2)Brng Cap to Brng Cap(OSR): 2.556
- Bearing Cap Type A: Isr
- Greaseable: N
- Length B (In): 2.556
- Bearing Cap Diameter (2): 1.125
- Bearing Cap Diameter (1): 1.125
- OEM Mfg: Mechanics
- OEM Series: S44
- Bearing Cap Diameter B (mm): 28.6
- Length A (In): 2.556
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 64.9
- SR(1)Brng Cap to Brng Cap(OSR): 2.556
- Bearing Cap Diameter A (mm): 28.6
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W100 | Front Driveshaft - CV at Transfer Case |
- Universal Joint Greaseable S44/3R Series
- Greaseable Inside Snap Ring Dimension of 2.556in 1.125in Bearing Cap Diameter 2 Piece Driveshaft with 2 Piece Rear Drive Shaft
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: 3r, Saginaw 44, Aam 1344
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: Y
- Length B (In): 2.556
- Bearing Cap Diameter (1): 1.125
- Length A (In): 2.556
- Bearing Cap Diameter A (mm): 1.125
- Bearing Cap Type: Round
- Length B (mm): 64.9
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.125
- OEM Mfg: Mechanics
- OEM Series: S44
- Bearing Cap Diameter B (mm): 1.125
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 64.9
-
Features:
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12 47 9126, 12471502, 12479126, 15-3147X, 2-0795, 2-3010, 2-3011, 2-3011G, 2-3111, 2104-53147X, 23011, 23104840, 234, 235, 26042371, 2GN156, 2GN272, 45U0108...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W100 | Front Driveshaft - CV at Transfer Case |
- Inside Snap Ring Dimension of 2.556in Non-Greasable 1 Piece Driveshaft 1.125in Bearing Cap Diameter with 1 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Isr
- Length B (mm): 64.9
- SR(2)Brng Cap to Brng Cap(OSR): 2.556
- Bearing Cap Type A: Isr
- Greaseable: N
- Length B (In): 2.556
- Bearing Cap Diameter (2): 1.125
- Bearing Cap Diameter (1): 1.125
- OEM Mfg: Mechanics
- OEM Series: S44
- Bearing Cap Diameter B (mm): 28.6
- Length A (In): 2.556
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 64.9
- SR(1)Brng Cap to Brng Cap(OSR): 2.556
- Bearing Cap Diameter A (mm): 28.6
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12479126, 15-3147X, 2-0795, 2-3010, 2-3011, 2-3011G, 2-3011P, 2-3111, 234, 235, 45U0108, 45U0110, 45U0136, 45U0158, 5-3147X, 534G, UJ234, UJ235...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W100 | Front Driveshaft - CV at Transfer Case |
- Differential Gear Set - DANA 44 4.56 RATIO
- with 4.56 Gear Ratio with Dana Model 44 Axle
- FSGR
- Product Attributes:
- Axle Type: Semi Floating
- Ring Teeth Count: 50
- Gear Ratio: 4.55
- Ring Gear Diameter (In.): 8.500
- Pinion Gear Included: Y
- Ring Gear Included: Y
- Axle Model: Dana 44
- Ring Gear Bolt Qty: 10
- Pinion Shaft Diameter: 0.983
- Ring Gear Rotation: Standard
- Include Installation Kit: Y
- Pinion Spline Count: 26
- Carrier Breaks: 3.92 And Up
- On Vehicle Location: Rear
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 11
- Ring Gear Bolt Thread In.: .375-24
-
Features:
- All Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
- Lapped to reduce noise and heat. Lubrication process allows for no break in period.
- Precision heat-treating and shot-peening delivers consistent quality, enhanced life by reducing residual stress doubling the fatigue life of the gear
- High-grade steel for maximum durability
- All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.
This Part Fits the Following OEM/Substitute Numbers:
15584145, 3634301, 4506120, 83503087, D44456, DS221055X, YGD44456
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W100 | Front |
- 4WD Actuator Housing Cover Gasket
- with Dana 44 Axle with Dana 44 Axle(s)
- FSGR
- Product Attributes:
- Fitment: Disconnect Housing
- Axle Model: Dana 30
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
This Part Fits the Following OEM/Substitute Numbers:
DS41494
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W100 | Front |
- Axle Spindle Bearing
- with Dana 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Cup Outside Diameter (MM): 41.20
- Cone Bore (MM): 33.32
- Cup Outside Diameter (IN): 1.62
- Bearing Type: Spindle Bearing And Seal Kit
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2JA749, 816757, DS706527X
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1989 - Dodge W100 | Front |
Showing 1 - 10 of 28 products
Loading...