2005 Ford Excursion Spicer Parts
Choose your Engine for your 2005 Ford Excursion
Image
Product
Price
- Drive Axle Shaft Universal Joint
- with Uncoated 1 Piece Driveshaft Inside Snap Ring Dimension of 3.000in Non-Greasable with 1 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Isr
- Model Number: Spicer 1480 Wj (spl55)
- Snap Ring (2): 3
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: N
- Bearing Cap Diameter (1): 1.375
- SR(1)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Diameter A (mm): 1.375
- Snap Ring (1): 3
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3.000
- Pre Greased: Y
- Seal Material: Rubber
- Grease Zerk Included: Not Required
- Coating Type: None
- Bearing Cap Diameter (2): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-807X, 3-0332, 374, 45U0301, CP332X, UJ374
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2005 - Ford Excursion | Front Axle at Wheels | 4WD |
- Non-Greasable with 1 Piece Rear Drive Shaft 1 Piece Driveshaft Inside Snap Ring Dimension of 3.000in with Uncoated
- HGVF
- Product Attributes:
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Pre Greased: Y
- Seal Material: Rubber
- Grease Zerk Included: Not Required
- Coating Type: None
- Greaseable: N
- Bearing Cap Diameter (2): 1.375
- Bearing Cap Diameter (1): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
- SR(1)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Diameter A (mm): 1.375
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2005 - Ford Excursion | Front Axle at Wheels | 4WD |
- Drive Axle Shaft Universal Joint
- with Uncoated 1 Piece Driveshaft Greaseable Inside Snap Ring Dimension of 3.000in with 1 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Isr
- Model Number: Spicer 1480 Wj (spl55)
- Snap Ring (2): 3
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.375
- SR(1)Brng Cap to Brng Cap(OSR): 3
- Bearing Cap Diameter A (mm): 1.375
- Snap Ring (1): 3
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-807X, 3-0332, 374, 45U0301, 89029369, UJ374
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2005 - Ford Excursion | Front Axle at Wheels | 4WD |
- Inside Snap Ring Dimension of 3.000in with 1 Piece Rear Drive Shaft 1 Piece Driveshaft Greaseable with Uncoated
- HGVF
- Product Attributes:
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.375
- Bearing Cap Diameter (1): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
- SR(1)Brng Cap to Brng Cap(OSR): 3
- Bearing Cap Diameter A (mm): 1.375
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2005 - Ford Excursion | Front Axle at Wheels | 4WD |
- Axle Shaft Seal
- 4.464in Outside Diameter Replaces OE Part Number(s) F81Z-3254-CB with Dana 50 Axle
- FSGR
- Product Attributes:
- Axle Model: Dana 50/60
- Material: Rubber
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
This Part Fits the Following OEM/Substitute Numbers:
DS50491, F81Z3254CB
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Ford Excursion | Front Outer |
- Axle Shaft Seal
- Replaces OE Part Number(s) F81Z-1175-HA, F81Z-1175-HC with Dana 50 Axle
- FSGR
- Product Attributes:
- Axle Model: Dana 60
- Material: Rubber
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2510566C1, 88967017, DS50381, F81Z-1175-HA, F81Z-1175-HC
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Ford Excursion | Front |
- SPINDLE NUT WASHER; LOCK WASHER
- with Dana 50 Axle Inside Diameter 50.95mm Outside Diameter 65.69mm Replaces OE Part Number(s) E5TZ-1198-A
- FSGR
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Tested and validated to rigorous OE specifications
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
This Part Fits the Following OEM/Substitute Numbers:
1403358, 15582235, 4723089, 5005303-3, DS621028, E5TZ-1198-1
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Ford Excursion | Front Outer |
- SPINDLE NUT & PIN - INNER
- with Dana Model 50 Axle with Pin
- FSGR
- Product Attributes:
- Self Locking: N
- Series: 60
- Flange Diameter: 63.31mm
- Material: Steel
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
This Part Fits the Following OEM/Substitute Numbers:
1403357, 15582233, 4723088, DS660568, E5TZ-1B198-A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Ford Excursion | Front |
- DIFFERENTIAL PINION SEAL
- with 0.629in Width with Dana 50 Axle
- FSGR
- Product Attributes:
- Axle Model: Dana 30, Dana 44
- Material: Rubber
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Ford Excursion | Front |
- DIFFERENTIAL PINION SEAL
- with 0.629in Width with Dana 50 Axle
- FSGR
- Product Attributes:
- Axle Model: Dana 30, Dana 44
- Material: Rubber
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
This Part Fits the Following OEM/Substitute Numbers:
5066446AA, DS50531, YMS8873
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Ford Excursion | Front |
Showing 1 - 10 of 49 products
Loading...