Image
Product
Price
- Universal Joint Greaseable 1330 Series OSR
- Greaseable with 1 Piece Rear Drive Shaft 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1330
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- Kit includes new snap rings.
- Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
- Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
- Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Nissan Xterra | Rear Driveshaft at Transmission |
- Wheel Bearing and Race Set
- with Dana Super 44 Axle Replaces OE Part Number(s) 40210-7S210 with 1.563in Bearing I.D. with 2.875in Bearing O.D.
- FSGR
- Product Attributes:
- Cup Outside Diameter (MM): 73.00
- Cup Radius (IN): 1.44
- Inner Diameter: 1.563
- Cone Bore (MM): 39.70
- Cup Outside Diameter (IN): 2.87
- Cup Radius (MM): 36.53
- Outer Diameter: 2.875
- Bearing Type: Wheel Bearing
- Thickness: 0.870
-
Features:
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Tested and validated to rigorous OE specifications
- Built to meet OE standards set by Dana
- Genuine OE quality. Tested and proven.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
267591001, 2JA423, 402107S210, 4203606, 83503064, DS565903
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Nissan Xterra | Rear |
- Axle Shaft Seal
- with Dana Super 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Inside Diameter (In): 1.878
- Axle Model: Dana 44
- Material: Rubber
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
432527S200, 68003270AA, DS52765
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Nissan Xterra | Rear |
- Axle Shaft Bearing Retainer
- with Dana Super 44 Axle
- FSGR
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
16346013, 4203605, 8353077, AUN8429, DS36797, J0994263
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Nissan Xterra | Rear |
- Wheel Bearing and Race Set
- with Dana Super 44 Axle Replaces OE Part Number(s) 40210-7S210 with 1.563in Bearing I.D. with 2.875in Outside Diameter Bearing(s)
- FSGR
- Product Attributes:
- Cup Outside Diameter (MM): 73.00
- Cup Radius (IN): 1.44
- Inner Diameter: 1.563
- Cone Bore (MM): 39.70
- Cup Outside Diameter (IN): 2.87
- Cup Radius (MM): 36.53
- Outer Diameter: 2.875
- Bearing Type: Wheel Bearing
- Thickness: 0.870
-
Features:
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Tested and validated to rigorous OE specifications
- Built to meet OE standards set by Dana
- Genuine OE quality. Tested and proven.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Nissan Xterra | Rear |
- Universal Joint Greaseable 1310 Series OSR
- with 1 Piece Rear Driveshaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm): 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
This Part Fits the Following OEM/Substitute Numbers:
02362830, 031468, 04371-04010, 04371-04020, 04371-0C010, 0437104010, 0437104020, 043710C010, 04723072, 051025Z1546, 051025Z3207, 055-0737, 06-06-1242, 1-0153, 1-0153G, 1-0154, 1-0200, 1-0278...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2010 - Nissan Xterra | Front Driveshaft at Front Axle | 4WD |
- Universal Joint Greaseable 1330 Series OSR
- with 3.625in Outside Snap Ring Dimension 1 Piece Driveshaft 1.062in Bearing Cap Diameter Greaseable with 1 Piece Rear Drive Shaft
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1330
- Snap Ring (2): 3.625
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Snap Ring (1): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- Kit includes new snap rings.
- Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
- Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
- Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
04362-60200, 0436260200, 04371-04030, 04371-04090, 04371-0K070, 04371-0K080, 0437104030, 0437104090, 043710K070, 043710K080, 04375-0C020, 04375-0C030, 04375-0C040, 04375-0C041, 043750C020, 043750C030, 043750C040, 043750C041...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Nissan Xterra | Rear Driveshaft at Transmission |
- DIFFERENTIAL DRIVE PINION GEAR NUT
- with Dana Super 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Thread Size: .875-14
- Self Locking: Y
- Series: 60
- Shaft Not Torque (Ft/Lbs): 47 Nm/20 To 35 Lbs
- Hex: 32.815mm
- Flange Diameter: 32.515mm
- Material: Steel
- Thickness: 15.875mm
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
This Part Fits the Following OEM/Substitute Numbers:
2510524C1, 382168S100, DS30271, SP 30271
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Nissan Xterra | Rear Differential |
- DIFFERENTIAL CRUSH SLEEVE
- with Dana Super 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Diameter: 1.340
- Length: 0.632
- Axle Model: Super Dana 44
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
This Part Fits the Following OEM/Substitute Numbers:
381658S100, 5183525AA, DS46925
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2010 - Nissan Xterra | Rear |
- Greaseable with 1 Piece Rear Drive Shaft 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2010 - Nissan Xterra | Front Driveshaft at Front Axle | 4WD |
Showing 1 - 10 of 30 products
Loading...