Image
Product
Price
- SPL55 Series with Uncoated Inside Snap Ring Dimension of 3.000in Non-Greasable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Pre Greased: Y
- Seal Material: Rubber
- Grease Zerk Included: Not Required
- Coating Type: None
- Greaseable: N
- Bearing Cap Diameter (2): 1.375
- Bearing Cap Diameter (1): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
- SR(1)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Diameter A (mm): 1.375
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2018 - Ford F-350 Super Duty | Front Axle at Wheels | 4WD |
- Drive Axle Shaft Universal Joint
- Greaseable Inside Snap Ring Dimension of 3.000in SPL55 Series with Uncoated
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Isr
- Model Number: Spicer 1480 Wj (spl55)
- Snap Ring (2): 3
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.375
- SR(1)Brng Cap to Brng Cap(OSR): 3
- Bearing Cap Diameter A (mm): 1.375
- Snap Ring (1): 3
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-807X, 3-0332, 374, 45U0301, 89029369, UJ374
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2018 - Ford F-350 Super Duty | Front Axle at Wheels | 4WD |
- SPL55 Series with Uncoated Greaseable Inside Snap Ring Dimension of 3.000in
- HGVF
- Product Attributes:
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.375
- Bearing Cap Diameter (1): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
- SR(1)Brng Cap to Brng Cap(OSR): 3
- Bearing Cap Diameter A (mm): 1.375
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2018 - Ford F-350 Super Duty | Front Axle at Wheels | 4WD |
- SPL70 Series with Uncoated Greaseable Inside Snap Ring Dimension of 3.780in
- HGVF
- Product Attributes:
- Bearing Cap Type B: Isr
- Length B (mm): 96
- SR(2)Brng Cap to Brng Cap(OSR): 3.78
- Bearing Cap Type A: Isr
- Greaseable: Y
- Bearing Cap Diameter (2): 1.375
- Bearing Cap Diameter (1): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl70wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 96
- SR(1)Brng Cap to Brng Cap(OSR): 3.78
- Bearing Cap Diameter A (mm): 1.375
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2018 - Ford F-350 Super Duty | Front Axle at Wheels | 4WD |
- Drive Axle Shaft Universal Joint
- Greaseable Inside Snap Ring Dimension of 3.780in SPL70 Series with Uncoated
- HGVF
- Product Attributes:
- Bearing Cap Type B: Isr
- Snap Ring (1): 3.78
- Snap Ring (2): 3.78
- Length B (mm): 96
- SR(2)Brng Cap to Brng Cap(OSR): 3.78
- Bearing Cap Type A: Isr
- Greaseable: Y
- Bearing Cap Diameter (2): 1.375
- Bearing Cap Diameter (1): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl70wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 96
- SR(1)Brng Cap to Brng Cap(OSR): 3.78
- Bearing Cap Diameter A (mm): 1.375
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
3-0157, 424, 45U2354, UJ424
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2018 - Ford F-350 Super Duty | Front Axle at Wheels | 4WD |
- Drive Axle Shaft Universal Joint
- Inside Snap Ring Dimension of 3.000in Non-Greasable SPL55 Series with Uncoated
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Isr
- Model Number: Spicer 1480 Wj (spl55)
- Snap Ring (2): 3
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: N
- Bearing Cap Diameter (1): 1.375
- SR(1)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Diameter A (mm): 1.375
- Snap Ring (1): 3
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3.000
- Pre Greased: Y
- Seal Material: Rubber
- Grease Zerk Included: Not Required
- Coating Type: None
- Bearing Cap Diameter (2): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-807X, 3-0332, 374, 45U0301, CP332X, UJ374
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2018 - Ford F-350 Super Duty | Front Axle at Wheels | 4WD |
- Differential Bearing Kit Ford Super Duty Rear M300
- with Dual Rear Wheels (DRW) with M300 Axle
- FSGR
- Product Attributes:
- Cup Length (In): 0.937
- Axle Model: 300
- Cup Length (Mm): 23.812
- Bearing Type: Single Taper
- Cone Bore (In): 2.625
-
Features:
- Highest quality mix of bearings, cups and cones, each precisely selected for maximum performance in every position and application
- Premium oil seals for your best protection against nagging leaks and damaging contamination
- All the small parts to do the job right, including sealant, snap rings, gaskets, shims, and more
- Production upgrades that keep Spicer parts as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Ford F-350 Super Duty | Rear |
- Axle Tube Seal
- Replaces OE Part Number(s) EC34-3N267-AA, EC3Z-3254-A with 18.9mm Thick Seal
- FSGR
- Product Attributes:
- Axle Model: M60
- Material: Fkm / Acm
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2510543C1, 48773, 52148, DS2019816, EC34-3N267-AA, EC3Z-3254-A, YMSS1018
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Ford F-350 Super Duty | Front |
- Differential Bearing Kit Ford Super Duty Rear M300
- with Dual Rear Wheels (DRW) with M300 Axle
- FSGR
- Product Attributes:
- Cup Length (In): 0.937
- Axle Model: 300
- Cup Length (Mm): 23.812
- Bearing Type: Single Taper
- Cone Bore (In): 2.625
-
Features:
- Highest quality mix of bearings, cups and cones, each precisely selected for maximum performance in every position and application
- Premium oil seals for your best protection against nagging leaks and damaging contamination
- All the small parts to do the job right, including sealant, snap rings, gaskets, shims, and more
- Production upgrades that keep Spicer parts as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Ford F-350 Super Duty | Rear |
- Universal Joint Greaseable 1350 Series
- Greaseable with 2 Piece Rear Drive Shaft 1.188in Bearing Cap Diameter 2 Piece Driveshaft with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.188
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.188
- 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm):
- 1.188
- 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
00002422475, 01-0729-504, 02330781, 0270006410, 02706410, 04371-04080, 04371-0C080, 04371-0C081, 04371-0C082, 04371-0C090, 04371-0C093, 04371-0C094, 0437104080, 043710C080, 043710C081, 043710C082, 043710C090, 043710C093...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2018 - Ford F-350 Super Duty | Front Driveshaft at Front Axle | XL | 4WD |
Showing 1 - 10 of 60 products
Loading...