1969 Ford Mustang Yukon Gear Parts
Choose your Engine for your 1969 Ford Mustang
Image
Product
Price
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 4.86 ratio
- 9 in. 10 Bolt; 4.86 Ratio Ford 9 in.; 4.86 Ratio~Ford 9 in.; Ring and Pinion Set; 4.86 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 4.86
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 4.86 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG F9-486
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1969 - Ford Mustang | V | 7030 | Rear | 8 Cyl 7.0L | 429 |
- Yukon Master Overhaul kit for 9in. LM102910 diff; with crush sleeve eliminator
- PinSeal; CrshSlv; PinDpthShms; CarShms; MrkgCmpd; PinNut; O-Rng; Slngr; Gskt; 20in. Ring Bolts Ford 9 in.~Ford 9 in. Rear; Differential Rebuild Kit; Timken Bearings; LM102910/ LM102949 Carrier Bearings (Fits 1.78 in. Carrier Journal & 2.89 in. Dropout); Fits Non Daytona Pinion Support; Includes crush sleeve eliminator~LM102910 carrier race; Includes crush sleeve eliminator
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Ford 9 In.
-
Features:
- Fits Ford 9 in. w/LM102940 Carrier Race
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pilot Bearing
- Pinion Seal
- Complete Shim Kit
- Includes Ring Gear Bolts
- Pinion Nut
- Crush Sleeve Eliminator
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1969 - Ford Mustang | V | 7030 | 8 Cyl 7.0L | 429 |
- Yukon Master Overhaul kit for Ford 9in. LM603011 diff/crush sleeve eliminator
- Ford 9in. Rear; PinSeal; CrshSlv; PinDpthShms; CarShms; MrkgCmpd; PinNut; O-Rng; Slngr; Gskt Ford 9 in. Rear; Differential Rebuild Kit; Timken Bearings; LM603011/ LM603049 Carrier Bearings (Fits 1.78 in. Carrier Journal & 3.062 in. Dropout); Fits Non Daytona Pinion Support; Includes crush sleeve eliminator~Ford 9 in.; 31 Spline; w/LM102940 Carrier Races; w/Crush sleeve eliminator
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Ford 9 In.
-
Features:
- Fits Ford 9 in. w/LM603011 Carrier Races
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Ring Gear Bolts
- Includes Pinion Nut
- Crush Sleeve Eliminator
- Pilot Bearing
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1969 - Ford Mustang | V | 7014 | 8 Cyl 7.0L | 428 |
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 3.50 ratio
- 9 in. Ring Gear; 3.50 Ratio; 28 Spline Pinion Ford 9 in.; 3.50 Ratio~Ford 9 in.; Ring and Pinion Set; 3.50 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 3.5
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 3.50 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG F9-350
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1969 - Ford Mustang | V | 7030 | Rear | 8 Cyl 7.0L | 429 |
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 4.11 ratio
- 9 in. Ring Gear; 4.11 Ratio; 28 Spline Pinion Ford 9 in.; 4.11 Ratio~Ford 9 in.; Ring and Pinion Set; 4.11 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 4.11
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 4.11 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG F9-411
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1969 - Ford Mustang | V | 7014 | Rear | 8 Cyl 7.0L | 428 |
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 4.56 ratio
- 9 in. Ring Gear; 4.56 Ratio; 28 Spline Pinion Ford 9 in.; 4.56 Ratio~Ford 9 in.; Ring and Pinion Set; 4.56 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 4.56
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 4.56 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG F9-456
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1969 - Ford Mustang | V | 7014 | Rear | 8 Cyl 7.0L | 428 |
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 3.70 ratio
- 9 in. Ring Gear; 3.70 Ratio; 28 Spline Pinion Ford 9 in.; 3.70 Ratio~Ford 9 in.; Ring and Pinion Set; 3.70 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 3.7
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 3.70 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG F9-370
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1969 - Ford Mustang | V | 7014 | Rear | 8 Cyl 7.0L | 428 |
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 4.86 ratio
- 9 in. Ring Gear; 4.86 Ratio; 28 Spline Pinion Ford 9 in.; 4.86 Ratio~Ford 9 in.; Ring and Pinion Set; 4.86 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 4.86
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 4.86 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1969 - Ford Mustang | V | 7014 | Rear | 8 Cyl 7.0L | 428 |
- Yukon friction modifier/Posi additive
- Positraction Additive; 4 oz.
- Help keep Positraction chatter down with Yukon s popular friction modifier (Posi additive) for limited slip differentials with composite clutches like the Yukon Dura Grip.
- Friction Modifier
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- For Use In Any Clutch-Style Limited Slip
- Positraction Additive
- Yukon Limited Slip Friction Modifier is a proprietary Yukon blend that reduces noise and chatter in clutch driven positraction units and limited slip differentials. As clutch packs wear they can develop a chatter, our Modifier enhances the abrasive properties of the clutches to retain stock-like engagement. Formulated for composite clutches, like those found in Yukon Dura Grip LSDs, Yukon Limited Slip Friction Modifier will outperform parts store grade modifiers because they are formulated for OEM paper-style clutches and contain one-fifth the abrasive chemicals.
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Ford Mustang |
- Yukon friction modifier/Posi additive
- Positraction Additive; 4 oz.
- Help keep Positraction chatter down with Yukon s popular friction modifier (Posi additive) for limited slip differentials with composite clutches like the Yukon Dura Grip.
- Friction Modifier
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- For Use In Any Clutch-Style Limited Slip
- Positraction Additive
- Yukon Limited Slip Friction Modifier is a proprietary Yukon blend that reduces noise and chatter in clutch driven positraction units and limited slip differentials. As clutch packs wear they can develop a chatter, our Modifier enhances the abrasive properties of the clutches to retain stock-like engagement. Formulated for composite clutches, like those found in Yukon Dura Grip LSDs, Yukon Limited Slip Friction Modifier will outperform parts store grade modifiers because they are formulated for OEM paper-style clutches and contain one-fifth the abrasive chemicals.
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Ford Mustang |
Showing 1 - 10 of 17 products
Loading...