1986 Jeep Cherokee Yukon Gear Parts
Choose your Engine for your 1986 Jeep Cherokee
Image
Product
Price
- Yukon Axle Bearing/Seal Kit for Dana 44/Model 20
- AMC 20; Timken Brand; Some Flanged Dana 44; Timken Brand; Some Flanged
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Axle Bearing And Seal
- Services One Side
- Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
- Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1986 - Jeep Cherokee | Rear | 4WD |
- Yukon Chromoly Front Axle Kit; Dana 30; Both Sides; 27 Spline; 1310 U-Joints
- 4340 Chrome-Moly Replacement; 27 Spline; Fits Dana 30/Reverse/Super; Includes Spicer U-Joints Dana 30 Front Axle Kit; 4340 Chrome-Moly Shafts; 27 Spline Inner and Outer Axles; Spicer U-Joints; and Disconnect Block Off Kit with Axle Seals~Dana 30; Reverse Rotation; 4340 Chrome-Moly Replacement; 27 Spline; Fits Dana 30/Reverse/Super; Includes Spicer U-Joints
- Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
- Axle Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Jeep Wrangler And Cherokee Front w/Dana Spicer 30
- Front Axle Kit
- 4340 Chromoly Axles
- 27 Spline Inner Axles
- Includes Inner And Outer Axle Shafts w/Spicer U-Joints
- Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.
This Part Fits the Following OEM/Substitute Numbers:
ZA W24110
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1986 - Jeep Cherokee | Front | 4WD |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~AMC Model 35~Dana 30; Reverse Rotation~Dana 44
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1986 - Jeep Cherokee | 4WD |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~AMC Model 35~Dana 30; Reverse Rotation~Dana 44
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1986 - Jeep Cherokee | Center | 4WD |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~AMC Model 35~Dana 30; Reverse Rotation~Dana 44
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1986 - Jeep Cherokee | Front Left | 4WD |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~AMC Model 35~Dana 30; Reverse Rotation~Dana 44
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1986 - Jeep Cherokee | Front Driveshaft at Front Axle | 4WD |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~AMC Model 35~Dana 30; Reverse Rotation~Dana 44
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1986 - Jeep Cherokee | Rear Driveshaft at Transmission | 4WD |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~AMC Model 35~Dana 30; Reverse Rotation~Dana 44
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1986 - Jeep Cherokee | Rear Driveshaft at Transfer Case | 4WD |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~AMC Model 35~Dana 30; Reverse Rotation~Dana 44
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1986 - Jeep Cherokee | Front Right | 4WD |
- Yukon standard open spider gear kit for Dana 30 with 27 spline axles
- Dana 30/Reverse; 27 Spline Dana 30; Reverse Rotation; 27 Spline~Dana 30; Spider Gear Set; 27 spline; Fits Standard Open Carrier
- Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
- Spider Gear Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fit Dana Spicer 30 Open Differential w/27 Spline Axles
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
- Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.
This Part Fits the Following OEM/Substitute Numbers:
ZIKD30-S-27
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 1986 - Jeep Cherokee | 4WD |
Showing 1 - 10 of 46 products
Loading...