2003 Dodge Dakota Yukon Gear Parts

Choose your Submodel for your 2003 Dodge Dakota


Showing 1 - 10 of 35 products
Image
SKU
Product
Rating
Price

Yukon Gear
  • Yukon Master Overhaul kit for 01/up Chrysler 9.25in. rear differential
  • 9.25 in. 12 Bolt; Rear Chrysler 9.25 in.~Chrysler 9.25 in. Rear; Differential Rebuild Kit; Timken Bearings
  • Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
  • Yukon Differential Master Overhaul Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
    • Model: Chrysler 9.25 In.
  • Features:
    • Fits 2001 And Up Chrysler 9.25 in. Rear
    • Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
    • Includes Kit Are Carrier Bearings And Races
    • Pinion Bearings And Races
    • Pinion Seal
    • Complete Shim Kit
    • Includes Ring Gear Bolts
    • Pinion Nut
    • Crush Sleeve
    • Thread Locker
    • Marking Compound w/Brush And Silicone
  • Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

This Part Fits the Following OEM/Substitute Numbers:
ZK C9.25-R-B

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Drive Type CID
2003 - Dodge Dakota V 3906 6 Cyl 3.9L SLT 4WD 239

Yukon Gear
  • Yukon 1310 U/Joint with zerk fitting on cross.
  • 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
  • Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
  • U-Joint
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Quantity Sold: 1
  • Features:
    • Yukon Products Are Held To The Highest Quality Standards In The Industry
    • Engineered Using State-Of-The-Art Design Software
    • Units Are Inspected To Ensure Precise Accuracy And Fitment
  • Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Additional Fitment Information:
Vehicle
2003 - Dodge Dakota

Yukon Gear
  • Yukon 1310 U/Joint with zerk fitting on cross.
  • 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
  • Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
  • U-Joint
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Quantity Sold: 1
  • Features:
    • Yukon Products Are Held To The Highest Quality Standards In The Industry
    • Engineered Using State-Of-The-Art Design Software
    • Units Are Inspected To Ensure Precise Accuracy And Fitment
  • Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Additional Fitment Information:
Vehicle Position
2003 - Dodge Dakota Front Right

Yukon Gear
  • Yukon 1310 U/Joint with zerk fitting on cross.
  • 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
  • Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
  • U-Joint
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Quantity Sold: 1
  • Features:
    • Yukon Products Are Held To The Highest Quality Standards In The Industry
    • Engineered Using State-Of-The-Art Design Software
    • Units Are Inspected To Ensure Precise Accuracy And Fitment
  • Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Additional Fitment Information:
Vehicle Position
2003 - Dodge Dakota Rear Driveshaft at Transfer Case

Yukon Gear
  • Yukon 1310 U/Joint with zerk fitting on cross.
  • 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
  • Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
  • U-Joint
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Quantity Sold: 1
  • Features:
    • Yukon Products Are Held To The Highest Quality Standards In The Industry
    • Engineered Using State-Of-The-Art Design Software
    • Units Are Inspected To Ensure Precise Accuracy And Fitment
  • Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Additional Fitment Information:
Vehicle Position
2003 - Dodge Dakota Front Left

Yukon Gear
  • Yukon 1310 U/Joint with zerk fitting on cross.
  • 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
  • Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
  • U-Joint
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Quantity Sold: 1
  • Features:
    • Yukon Products Are Held To The Highest Quality Standards In The Industry
    • Engineered Using State-Of-The-Art Design Software
    • Units Are Inspected To Ensure Precise Accuracy And Fitment
  • Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Additional Fitment Information:
Vehicle Position
2003 - Dodge Dakota Front

Yukon Gear
  • Yukon 1310 U/Joint with zerk fitting on cross.
  • 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
  • Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
  • U-Joint
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Quantity Sold: 1
  • Features:
    • Yukon Products Are Held To The Highest Quality Standards In The Industry
    • Engineered Using State-Of-The-Art Design Software
    • Units Are Inspected To Ensure Precise Accuracy And Fitment
  • Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Additional Fitment Information:
Vehicle Position
2003 - Dodge Dakota Rear

Yukon Gear
  • Yukon 1310 U/Joint with zerk fitting on cross.
  • 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
  • Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
  • U-Joint
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Quantity Sold: 1
  • Features:
    • Yukon Products Are Held To The Highest Quality Standards In The Industry
    • Engineered Using State-Of-The-Art Design Software
    • Units Are Inspected To Ensure Precise Accuracy And Fitment
  • Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Additional Fitment Information:
Vehicle Position
2003 - Dodge Dakota Rear Driveshaft - CV at Transmission

Yukon Gear
  • Yukon 1310 U/Joint with zerk fitting on cross.
  • 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
  • Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
  • U-Joint
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Quantity Sold: 1
  • Features:
    • Yukon Products Are Held To The Highest Quality Standards In The Industry
    • Engineered Using State-Of-The-Art Design Software
    • Units Are Inspected To Ensure Precise Accuracy And Fitment
  • Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Additional Fitment Information:
Vehicle Position
2003 - Dodge Dakota Rear Driveshaft at Transmission

Yukon Gear
  • Yukon 1310 U/Joint with zerk fitting on cross.
  • 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
  • Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
  • U-Joint
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Quantity Sold: 1
  • Features:
    • Yukon Products Are Held To The Highest Quality Standards In The Industry
    • Engineered Using State-Of-The-Art Design Software
    • Units Are Inspected To Ensure Precise Accuracy And Fitment
  • Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Additional Fitment Information:
Vehicle Position
2003 - Dodge Dakota Front Axle
Showing 1 - 10 of 35 products

Loading...