2015 GMC Sierra 1500 Accessories and Fluids Parts
Choose your Part Name for your 2015 GMC Sierra 1500
Image
Product
Price
- Low Profile
- Tonneau Cover Hardware Kit; Low Profile;
- Tonneau Cover Hardware Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Tonneau Cover Hardware Kit
- Replaces Standard Railmount Hardware. Allows Toolbox to be installed flush against BackRack(TM). Eliminates gap between Toolbox and Backrack. Allows Toolbox to be installed without drilling into truck bed. Standard 21 inches. Optional 31 inches available.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - GMC Sierra 1500 |
- Low Profile; 1 in. Riser
- Tonneau Cover Adaptor; Low Profile; 1 in. Riser;
- Tonneau Cover Adaptor
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Tonneau Cover Adaptor
- TONNEAU COVER ADAPTORS BACKRACK(TM) does not make Tonneau Covers but we have created an accessory called the Tonneau Cover Adaptor Kit (TCA). This kit allows you to install certain types of Tonneau Covers with BACKRACK(TM) and Safety Rack Cab Guards. CLAMP TO THE RAIL TONNEAU COVERS Backrack(TM) Cab Guards sit on the bed rail at the front of the truck bed, over the front Stake Pockets. Tonneau Covers that encroach on this area are generally not compatible with BACKRACK(TM) products. Certain Tonneau Cover manufacturers clamp their covers to the inside rail of the truck bed, exposing the area above the Stake Pockets. These type of Tonneau Covers are compatible with BACKRACK(TM) Cab Guards. HOW DO THE TONNEAU COVER ADAPTORS WORK? The TCAs simply lift your BACKRACK(TM) Cab Guard up by one or two inches depending on your trucks make, model and year. BACKRACK(TM) Cab Guards need that increase in height to clear the Tonneau Cover. The TCAs also include extended Stake Pocket Bolts (SPBs) to replace the SPBs that came with your BACKRACK(TM) Cab Guard originally. These extended SPBs are required to accommodate the increased height. IS YOUR TONNEAU COVER COMPATIBLE? We have created a Tonneau Cover Compatibility Chart listing covers that are compatible with BACKRACK(TM) Cab Guards. Before purchasing a Tonneau Cover, be sure to refer to this Chart. Click on the icon above to view. Some covers may require slight modification and are listed on the Chart along with the fully compatible and incompatible Tonneau Covers.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - GMC Sierra 1500 |
- Universal; 2 in. Riser
- Tonneau Cover Adaptor; Universal; 2 in. Riser;
- Tonneau Cover Adaptor
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Tonneau Cover Adaptor
- TONNEAU COVER ADAPTORS BACKRACK(TM) does not make Tonneau Covers but we have created an accessory called the Tonneau Cover Adaptor Kit (TCA). This kit allows you to install certain types of Tonneau Covers with BACKRACK(TM) and Safety Rack Cab Guards. CLAMP TO THE RAIL TONNEAU COVERS Backrack(TM) Cab Guards sit on the bed rail at the front of the truck bed, over the front Stake Pockets. Tonneau Covers that encroach on this area are generally not compatible with BACKRACK(TM) products. Certain Tonneau Cover manufacturers clamp their covers to the inside rail of the truck bed, exposing the area above the Stake Pockets. These type of Tonneau Covers are compatible with BACKRACK(TM) Cab Guards. HOW DO THE TONNEAU COVER ADAPTORS WORK? The TCAs simply lift your BACKRACK(TM) Cab Guard up by one or two inches depending on your trucks make, model and year. BACKRACK(TM) Cab Guards need that increase in height to clear the Tonneau Cover. The TCAs also include extended Stake Pocket Bolts (SPBs) to replace the SPBs that came with your BACKRACK(TM) Cab Guard originally. These extended SPBs are required to accommodate the increased height. IS YOUR TONNEAU COVER COMPATIBLE? We have created a Tonneau Cover Compatibility Chart listing covers that are compatible with BACKRACK(TM) Cab Guards. Before purchasing a Tonneau Cover, be sure to refer to this Chart. Click on the icon above to view. Some covers may require slight modification and are listed on the Chart along with the fully compatible and incompatible Tonneau Covers.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - GMC Sierra 1500 |
- Wide Top
- Tonneau Cover Hardware Kit; Wide Top;
- Tonneau Cover Hardware Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Tonneau Cover Hardware Kit
- BACKRACK(TM) products are manufactured exclusively in North America at our Oakville, Ontario manufacturing facility. Outsourcing jobs offshore is not part of our corporate culture. We feel that in order to control quality and maximize efficiency, a hands-on approach to manufacturing must be followed. Some of our competitors design or copy products and hand them off to a third-party manufacturer to add to their assortment of products. At BACKRACK(TM), we have been manufacturing quality truck racks since 1988. We have focused on our core product line and, as a result, our processes are lean and efficient. This has enabled BACKRACK(TM) to offer competitive pricing, superior quality, and fast turnaround times for our dealers and distributors. We are emotionally invested in our products, our company, and our reputation. When third party manufacturers build products, that level of commitment is lost. BACKRACK(TM) products are available wherever truck accessories are sold across North America. With warehouse locations in Ontario, New York, and California, our product is never far from where you need it. Our extensive network of Distributors and Dealers ensure that BACKRACK(TM) products are available for installation on your truck immediately or, within a few days. Be sure to ask for BACKRACK(TM) products by name and please, don't be fooled by cheap imitations. Only BACKRACK(TM) products have the BACKRACK(TM) trademark on the product.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - GMC Sierra 1500 |
- Prestone DOT 3 Brake Fluid - 12 fl oz- Synthetic, High Grade, 50,000 Mile
- Prestone Hi-Temp Synthetic DOT 3 Brake Fluid - 12 Oz.
- Product Attributes:
- Minimum Dry Boiling Point:
- 238
- 460
- Polyglycol Ether Based: Yes
- Minimum Wet Boiling Point:
- 291
- 300
- Volume: 354.9
- Composition: Synthetic
- Container Type: Plastic Container
- Boiling Point: 401
- Minimum Dry Boiling Point:
- Prestone® DOT 3 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 3. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 3 braking systems (ABS, disc or drum) and can mix with any DOT 3 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2015 - GMC Sierra 1500 | V | - | 6 Cyl 4.3L | 262 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - GMC Sierra 1500 |
- 4 Panel; No-Drill; With CYNC Latching System; Fitment Code [66GS14]
- LEER HF650M Hard Quad-Folding Tonneau Cover; 4 Panel; No-Drill; With CYNC Latching System; Fitment Code [66GS14];
- LEER HF650M Hard Quad-Folding Tonneau Cover
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Paintable: No
- WARNING CA Proposition 65 Message: Cr-cancer And Reproductive
- Works w/Toolbox: No
- Front Opening: No
- Style: Hard Folding Cover
- Key Lockable: No
- Full Bed Access: Yes
- Low Profile: Yes
-
Features:
- True Flush Mount Hard Folding Cover Offers Sleek Look
- LEERs Industry Exclusive CYNC Latching System
- Drill-Free Installation Provides Easy On and Off
- 3-Year Limited Warranty
- This durable, weather-resistant cover is engineered to provide higher-quality reliability and performance than any other truck bed cover on the market. The patented HF650M Hard Folding Cover has a sleek, 12MM low-profile design superior to all other truck bed covers. The HF650M offers ultimate flexibility with four lightweight yet durable panels to accommodate loads of all sizes, surpassing competitors' product utility capabilities and making any hauling job a breeze. The HF650M also offers a superior water management system – requiring no drain tubes – multiple latching positions, and much more.
Additional Fitment Information:
| Vehicle | Bed | Bed Length |
|---|---|---|
| 2015 - GMC Sierra 1500 | Fleetside | 78.9 |
- 3 Panel; Tri-Fold; Low Profile; With CYNC Latching System; Textured Matte Black; Fitment Code [58GS14]
- LEER HF350M Hard Tri-Folding Tonneau Cover; 3 Panel; Tri-Fold; Low Profile; With CYNC Latching System; Textured Matte Black; Fitment Code [58GS14];
- LEER HF350M Hard Tri-Folding Tonneau Cover
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Paintable: No
- WARNING CA Proposition 65 Message: Cr-cancer And Reproductive
- Works w/Toolbox: No
- Front Opening: No
- Style: Hard Folding Cover
- Key Lockable: No
- Full Bed Access: Yes
- Low Profile: Yes
-
Features:
- Low Profile Textured Matte Black Panels
- Easy On/Easy Off No-Drill Installation
- Exclusive CYNC Latching System For One Hand Operation-Avoid Flimsy Pull Cables
- Need to install a tonneau fast? This one doesn't even require tools. And it's dent-resistant, keeping your valuable load safe. It sounds too good to be true, which may be the best part - because it isn't.
Additional Fitment Information:
| Vehicle | Bed | Bed Length |
|---|---|---|
| 2015 - GMC Sierra 1500 | Fleetside | 69.3 |
- Vinyl; Rounded Corners And Double Stitching; No-Drill; With CYNC Latching System; Fitment Code [58GS14]
- LEER Latitude Soft Folding Tonneau Cover; Vinyl; Rounded Corners And Double Stitching; No-Drill; With CYNC Latching System; Fitment Code [58GS14];
- LEER Latitude Soft Folding Tonneau Cover
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Paintable: No
- WARNING CA Proposition 65 Message: Cr-cancer And Reproductive
- Works w/Toolbox: No
- Front Opening: No
- Style: Soft Folding Cover
- Key Lockable: No
- Full Bed Access: Yes
- Low Profile: Yes
-
Features:
- LEER Patent Pending CYNC Latching System
- CYNCs Unique Adjustable Catch Plate Allows Mounting The System Close To The Tailgate
- Sturdy Yet Flexible And Rugged Vinyl Cover Material is Designed To Give Years Of Service
- Keeping your cargo safe in extreme conditions just got easier with our Latitude soft tri-fold tonneau cover. An efficient self-tensioning system and added security fasteners keep the attractive vinyl cover in place. Opening and closing the cover is a snap—the system can be closed with the tailgate open or shut, you can control it from either side of the truck bed, and it only takes two fingers to release the latch. Beautifully rounded reinforced corners and easy maintenance make Latitude your best flexible folding cover choice.
Additional Fitment Information:
| Vehicle | Bed | Bed Length |
|---|---|---|
| 2015 - GMC Sierra 1500 | Fleetside | 69.3 |
- Vinyl; No-Drill; With CYNC Latching System; Fitment Code [66GS14]
- LEER SR250 Soft Rolling Tonneau Cover; Vinyl; No-Drill; With CYNC Latching System; Fitment Code [66GS14];
- LEER SR250 Soft Rolling Tonneau Cover
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Paintable: No
- WARNING CA Proposition 65 Message: Cr-cancer And Reproductive
- Works w/Toolbox: No
- Front Opening: No
- Style: Roll-up Soft Cover
- Drilling Required: No
- Full Bed Access: Yes
- Low Profile: Yes
-
Features:
- Exclusive CYNC Latching System Allows Opening From Either Side
- Automatic Tension Adjustment-No Tools Required
- Double-Coated Commercial Grade Reinforced Vinyl
- Innovative yet simple, the SR250 is the ideal economical option to keep your truck bed covered. The SR250 offers features you won't find anywhere else—like our LEER CYNC(TM) p in. release latch system that locks down the cover or opens the cover one handed from either side of the bed. And it gets even better. You can roll the cover back and secure it in place for full access to your bed, or unroll it to seal everything up—very easy. And when you drive with the cover in place, the aerodynamic profile reduces wind resistance, lowering your fuel costs. There's nothing else like the SR250.
Additional Fitment Information:
| Vehicle | Bed | Bed Length |
|---|---|---|
| 2015 - GMC Sierra 1500 | Fleetside | 78.9 |
Showing 1 - 10 of 209 products
Loading...