1970 Nissan 240Z Air and Fuel Delivery Parts
Choose your Part Name for your 1970 Nissan 240Z
Image
Product
Price
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1970 - Nissan 240Z |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1970 - Nissan 240Z |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 10/1969-
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 1970 - Nissan 240Z | Fr:10-00-69 |
- Custom Racing Assembly
- Fits w/1969-81 Austin Maxi/75-77 Triumph 2500/70-84 Nissan Bluebird/240C/100A/65-75 Rover Austin Morris/MGC; Round; H-2.125 in.; ID-4.875 in.
- K/N Custom Air Filter kits are designed to boost the performance from your carburetor while keeping dirt on the outside where it belongs. These assemblies come with custom chrome top and base plates and a K/N washable air filter.
- Racing Custom Air Cleaner
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Overall Height: 2.250 In. (57mm)
- Air Filter Height: 2.125 In. (54mm)
- Mounting Hardware Included: Yes
- Inlet Diameter: 1.625 In. (41mm)
- WARNING CA Proposition 65: Yes
- Replacement Filter: E-9143
- Item Weight: 1.200 Lbs. (0.6 Kg)
- Product Box Height: 3.500 In. (89mm)
- Filter Material: Cotton Gauze
- Neck Flange: 1.625 In. (41mm)
- Product Box Width: 6.310 In. (160mm)
- Product Box Length: 6.560 In. (167mm)
- Prop 65 (C, R or CR): Cr
- Top Style: Metal
- Air Filter Inside Diameter: 4.875 In. (124mm)
- Top Material: Chrome
- Size: 6-8
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- CARB/Air Horn Diameter: N/a
- Air Filter Element Washable: Yes
- Shape: Round
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
-
Features:
- Designed To Increase Horsepower And Acceleration
- Show Quality With Custom Chrome Top and Base
- Washable And Reusable Air Filter
- High Air Flow With Excellent Filtration
- One Year Limited Warranty
- K&N Custom Air Filters for Single or Two Barrel Carburetors - K&N custom air filter kits are designed to boost performance from your carburetor while keeping the dirt on the outside where it belongs. These assemblies come with custom chrome top and base plates and the famous K&N High-Flow Washable Air Filter.
Additional Fitment Information:
| Vehicle |
|---|
| 1970 - Nissan 240Z |
Showing 1 - 5 of 5 products
Loading...