1992 Toyota 4Runner Air and Fuel Delivery Parts


Showing 1 - 10 of 68 products
Image
SKU
Product
Rating
Price

Delphi
  • Electric Fuel Pump
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 6
    • Maximum Pressure: 80.0
    • Fuel Type: Gas
    • Pump Type: Electric
    • Outlet Outside Diameter: 0.313
    • Terminal Quantity: 2
    • Wiring Harness Included: No
    • Position(s): In-tank
    • System Pressure: 44 Psi
    • Terminal Type: Pin
    • Terminal Gender: Male
    • Average Flow Rating: 26
    • Strainer Included: No
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

This Part Fits the Following OEM/Substitute Numbers:
152-0894, 152-0895, 152-0910, 152-0914, 195130-6970, 1951306970, 1AMFP00149, 23220-03020, 23220-03030, 23220-03040, 23220-0C010, 23220-20020, 23220-74020, 23220-74021, 2322003020, 2322003030, 2322003040, 232200C010...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1992 - Toyota 4Runner L 2366 In-Tank 4 Cyl 2.4L -

Wix
  • WIX Air Filter Panel
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Duty Type: Ld
    • Length: 9.84
    • Style: Air Filter Panel
    • Media Material: Synthetic
    • Class: B
    • Cubic Feet Per Minute Rating: 210
  • WIX Premium Panel Air Filters provide excellent engine protection for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM air filter change intervals. These filters contain 30% more media than OES filters and use a phenolic resin treated enhanced cellulose media which provides excellent durability against moisture ingestion. When applicable, the high-tear strength polyurethane seal survives extreme hot and cold temperature conditions. Air filter Laboratory Tests per ISO 5011 at least 99.5% efficiency (Based on Wix 42389)

This Part Fits the Following OEM/Substitute Numbers:
0 986 AF2 517, 0421488, 0AC00310, 1 457 433 952, 1432080, 1500A286, 16002, 1607673380, 17801-08010, 17801-35020, 17801-35020-83, 17801-55020, 20-02-299, 20-09-998, 2452, 25099549, 25175321, 26162...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1992 - Toyota 4Runner L 2366 Canada 4 Cyl 2.4L -

Motorad
  • Tethered Fuel Cap
  • Non-Vented Black Cap
  • Tethered
  • Product Attributes:
    • Vented: No
    • Lockable: No
    • Tethered: Yes
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:
10825T, 23368720, 23373281, 290410, 6825T, 703-1889, 9MGC825T, MGC825T

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
1992 - Toyota 4Runner L 2366 GAS 4 Cyl 2.4L -

Motorad
  • Fuel Cap
  • Non-Vented Black Cap
  • Standard
  • Product Attributes:
    • Vented: No
    • Lockable: No
    • Tethered: No
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:
1078-19701, 10825, 11825, 12F51, 1725179915, 20804101, 20962524, 22821353, 22821354, 22921365, 22921366, 22944177, 22944270, 22992634, 22997859, 23368720, 30003995, 30005314...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
1992 - Toyota 4Runner L 2366 GAS 4 Cyl 2.4L -

Ishino Stone
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • O-Ring

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1992 - Toyota 4Runner V 2959 Upper 6 Cyl 3.0L -

Delphi
  • Fuel Pump Strainer
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Attachment Type: Push On
    • Strainer Material: Polyester
    • Fitting Inside Diameter: 11.0
    • Micron Rating: 31
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

This Part Fits the Following OEM/Substitute Numbers:
23217-03030, 23217-0F010, 23217-11020, 23217-20060, 23217-23010, 23217-46090, 23217-74021, 23217-76040, 2321711020, 2321746090, 68000, 68020, 68021, 68031, 68040, 68043, 952-0002, 952-0005...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1992 - Toyota 4Runner L 2366 4 Cyl 2.4L -

Denso
  • Electric Fuel Pump
  • DENSO OE Replacement Fuel Pump
  • Electric Fuel Pump
  • New Electric Fuel Pump
  • Product Attributes:
    • Negative Ground: Yes
    • Mounting Hardware Included: Yes
    • Inlet Outside Diameter: 11.000
    • Regulator Included: No
    • Mounting Bracket Included: No
    • Strainer Included: No
    • Seal And Lock Ring Included: No
  • Electric Fuel Pump

This Part Fits the Following OEM/Substitute Numbers:
23220-03020, 23220-03040, 23220-0C010, 23220-20020, 23220-74021, 23221-03030, 23221-0A030, 23221-0D011, 23221-11070, 23221-20040, 23221-21020, 23221-21060, 23221-28280, 23221-46010, 67484, 69487, 69697, 69763...VIEW MORE

Additional Fitment Information:
Vehicle Engine Designation
1992 - Toyota 4Runner 22RE

Motorad
  • Locking Fuel Cap
  • Non-Vented Black Cap
  • Locking
  • Product Attributes:
    • Vented: No
    • Lockable: Yes
    • Tethered: No
  • Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:
10595, 1078-317696, 11595, 12F24L, 191201551D, 1H0201553B, 20968135, 31675, 40795, 533201551C, 5795, 703-1610, 895201551, 9MGC795, G795, MGC795, P5795

Additional Fitment Information:
Vehicle Block CC Fuel Type Engine CID
1992 - Toyota 4Runner L 2366 GAS 4 Cyl 2.4L -

K&N
  • Performance Air Intake System
  • Includes Air Filter/Adaptor/Tubing/Hardware; Estimated Horsepower Gain 3.33 HP At 4405 RPM;CARB E.O. D-269-8
  • K/N s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K/N s No-Hassle Lifetime Limited Warranty.
  • Filtercharger Injection Performance Kit
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Air Filter Height: 4.000 In. (102mm)
    • Clamp Style: Mini
    • Coupler Color: Not Applicable
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 3.33 Hp @ 4405 Rpm
    • TUV Approved (Europe): No
    • Replacement Filter: Rf-1009
    • Item Weight: 4.600 Lbs. (2.1 Kg)
    • RPM: 4405
    • Product Box Height: 9.250 In. (235mm)
    • Filter Material: Cotton Gauze
    • Air Filter Outlet Shape: Round
    • Product Box Width: 9.130 In. (232 Mm)
    • Air Filter Outlet Length: 6.000 In. (152mm)
    • Product Box Length: 9.130 In. (232mm)
    • Clamp Quantity: 3
    • Air Filter Large End Diameter: 7.500 In. (191mm)
    • Intake Pipe Color: Black
    • Clamp Color: Natural
    • Clamp Material: Stainless Steel
    • Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Intake Pipe Material: High-density Cross-linked Polyethylene
    • Air Filter Outlet Width: 6.000 In. (152mm)
    • Horse Power Increase: 3 Hp
    • Air Filter Element Washable: Yes
    • Couplers Included: No
    • Package Material: Paperboard
    • Filter Color: Red
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Package Type: Box
    • Air Box Included: No
    • Street Legal: Yes
  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response And Engine Sound
    • Washable And Reusable Lifetime Air Filter
    • Easy To Install Usually In 90 Minutes or Less
    • Replaces Entire Factory Air Intake System
    • K&N Million Mile Limited Warranty
  • The K&N 57-9006 FIPK air intake system replaces your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-9006 air intake comes with a chrome topped K&N high-flow air filter that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and an engine vent line. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 60 minutes or less using the existing factory mounting points. The tools needed are a screwdriver, socket set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's No-Hassle Lifetime Limited Warranty.

Additional Fitment Information:
Vehicle Block CC Engine CID
1992 - Toyota 4Runner V 2959 6 Cyl 3.0L -

K&N
  • Performance Air Intake System
  • Includes Air Filter/Adaptor/Hardware; Estimated Horsepower Gain 5.13 At 4700 RPM;CARB E.O. D-269-8
  • K/N s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K/N s No-Hassle Lifetime Limited Warranty.
  • Filtercharger Injection Performance Kit
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • Air Filter Height: 4.000 In. (102mm)
    • Clamp Style: Regular
    • Coupler Color: Not Applicable
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • Estimated Horse Power Gain: 5.13 Hp @ 4700 Rpm
    • TUV Approved (Europe): No
    • Replacement Filter: Rf-1009
    • Item Weight: 3.800 Lbs. (1.7 Kg)
    • RPM: 4700
    • Product Box Height: 9.250 In. (235mm)
    • Filter Material: Cotton Gauze
    • Air Filter Outlet Shape: Round
    • Product Box Width: 9.130 In. (232 Mm)
    • Air Filter Outlet Length: 6.000 In. (152mm)
    • Product Box Length: 9.130 In. (232mm)
    • Clamp Quantity: 2
    • Air Filter Large End Diameter: 7.500 In. (191mm)
    • Clamp Color: Natural
    • Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
    • Clamp Material: Stainless Steel
    • Prop 65 (C, R or CR): Cr
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Air Filter Outlet Width: 6.000 In. (152mm)
    • Horse Power Increase: 5 Hp
    • Air Filter Element Washable: Yes
    • Couplers Included: No
    • Package Material: Paperboard
    • Filter Color: Red
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Package Type: Box
    • Air Box Included: No
    • Street Legal: Yes
  • Features:
    • Guaranteed To Increase Horsepower
    • Designed To Improve Throttle Response And Engine Sound
    • Washable And Reusable Lifetime Air Filter
    • Easy To Install Usually In 90 Minutes or Less
    • Replaces Entire Factory Air Intake System
    • K&N Million Mile Limited Warranty
  • The K&N 57-9008 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Toyota 4 Runner and Pickup models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-9008 air intake comes with a chrome topped K&N high-flow air filter that installs onto the factory mass air sensor and directs air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 60 minutes or less using existing factory mounting points requiring commonly available tools to do the job. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's No-Hassle Lifetime Limited Warranty.

Additional Fitment Information:
Vehicle Block CC Engine CID
1992 - Toyota 4Runner L 2366 4 Cyl 2.4L -
Showing 1 - 10 of 68 products

Loading...