1995 Ford Probe Air and Fuel Delivery Parts
Choose your Part Name for your 1995 Ford Probe
Image
Product
Price
- Fuel Cap
- Vented Black Cap
- Standard
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10285948, 1078-290309, 10817, 10819, 10830, 10830D, 10834, 10834Y, 10837, 10869, 11817, 11830, 11834, 11834Y, 11837, 12335028, 12F46, 15001538...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Ford Probe | L | 1989 | 4 Cyl 2.0L | 122 |
- Electric Fuel Pump
- To be used with OE Style Modules only; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Average Current Draw: 6
- Maximum Pressure: 103.0
- Pump Type: Electric
- Fuel Type: Gas
- Outlet Outside Diameter: 0.313
- Terminal Quantity: 2
- Wiring Harness Included: Yes
- Position(s): In-tank
- System Pressure: 44 Psi
- Terminal Type: Pin
- Terminal Gender: Male
- Strainer Included: No
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
0K01B-13-350, 152-0905, 152-0931, 152-0932, 152-0933, 17040-3S500, 17040-3S510, 17040-S3M-A00, 17042-5M800, 17042-7B025, 1F22-13-350B, 1F22-13-350C, 1L2Z 9H307-A, 1L2Z 9H307-B, 1W1Z 9H307-BG, 25164855, 25177309, 25177352...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Ford Probe | L | 1989 | In-Tank | 4 Cyl 2.0L | 122 |
- Fuel Pump - Electric In Tank
- Includes Hose, Clamps, Grommet, Rubber Sleeeve, Tank Seals, and Wire Harness
- Product Attributes:
- Voltage: 12v
- Minimum Flow Rating: 33.0
- Negative Ground: Yes
- Mounting Hardware Included: No
- Pump Type: Electric
- Fuel Sending Unit Included: No
- Length: 114.0
- Fuel Pump Inlet Type: Strainer
- Connector Shape: Rectangle
- Outlet Outside Diameter: 9.0
- Terminal Quantity: 2
- Mounting Bracket Included: No
- Minimum Pressure: 60.0
- Seal And Lock Ring Included: No
- Wiring Harness Included: Yes
- Terminal Type:
- Blade
- Spade
- Terminal Gender: Male
- Inlet Outside Diameter: 11.0
- Regulator Included: No
- Outlet Fitting Thread Size: 1/2
- Strainer Included: No
- The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
This Part Fits the Following OEM/Substitute Numbers:
1234663, 152017, 17040-3S500, 17040-3S505, 17040-3S510, 17040-3S515, 17040-5S105, 17040-S3M-A00, 17042-5M015, 17042-7B025, 1W1Z 9H307-BD, 1W1Z 9H307-BG, 2910231, 2910247, 2910313, 2950001, 2950190, 2C2Z 9H307-CB...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1995 - Ford Probe | V | 2497 | In-Tank | 6 Cyl 2.5L | - |
- Key Vent Fuel Cap
- Vented Black Cap
- Key Vent
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10501, 10501D, 1078-290305, 11501, 12F3PL, 17251F9926, 17501D, 31734, 40900, 4764917AA, 5501, 55010, 5501A, 703-1685, 9MGC900, MGC900, P5501
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Ford Probe | L | 1989 | 4 Cyl 2.0L | 122 |
- Tethered Fuel Cap
- Vented Black Cap
- Tethered
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: Yes
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10817T, 10819T, 10834T, 10837T, 10868T, 10869T, 172511TG0F, 172514BA0B, 172519DC1C, 290409, 6817T, 703-1888, 9MGC817T, MGC817T
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Ford Probe | L | 1989 | 4 Cyl 2.0L | 122 |
- Push Vent Fuel Cap
- Vented Black Cap
- Push Vent
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
1078-291433, 10819, 10819D, 11819, 12F1P, 31615, 31615D, 3527385, 3542094, 40819, 6819, 6819A, 703-1703, 9MGC819, F32Z9030A, F42Z9030A, F4DZ9030A, F5AZ9030B...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Ford Probe | L | 1989 | 4 Cyl 2.0L | 122 |
- Locking Fuel Cap
- Vented Black Cap
- Locking
- Product Attributes:
- Vented: Yes
- Lockable: Yes
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10501, 10501D, 10504, 10504Y, 10507, 10591, 10591D, 1078-290207, 11504, 11504Y, 11507, 11591, 12F20L, 1H0201553, 307201551, 31778, 31780, 31783...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Ford Probe | L | 1989 | 4 Cyl 2.0L | 122 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Ford Probe | V | 2497 | 6 Cyl 2.5L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1995 - Ford Probe | V | 2497 | 6 Cyl 2.5L | - |
- Performance Air Intake System
- Includes Air Filter/Hardware;CARB E.O. D-269-12
- K/N s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. This power gaining air intake comes with K/N s famous million mile limited warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 8.000 In. (203mm)
- Clamp Style: Regular
- Coupler Color: Not Applicable
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- TUV Approved (Europe): No
- Replacement Filter: Rf-1025
- Item Weight: 2.800 Lbs. (1.3 Kg)
- Product Box Height: 9.250 In. (235mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 9.130 In. (232 Mm)
- Air Filter Outlet Length: 3.250 In. (83mm)
- Product Box Length: 9.130 In. (232mm)
- Air Filter Large End Diameter: 5.500 In. (140mm)
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Air Filter Outlet Width: 3.250 In. (83mm)
- Air Filter Element Washable: Yes
- Package Material: Paperboard
- Couplers Included: No
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- The K&N 57-2507 FIPK air intake system replaces the restrictive factory air filter and air box in some Ford Probe and Mazda MX-6 models. K&N intakes are designed to dramatically reduce intake restriction and improve air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-2507 air intake comes with a chrome topped K&N high-flow air filter that installs onto the factory mass air sensor within the previous air box space. Air is directed through the air filter into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes requiring commonly available tools to do the job. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1995 - Ford Probe | V | 2497 | 6 Cyl 2.5L | GT | - |
Showing 1 - 10 of 20 products
Loading...