2002 Honda S2000 Air and Fuel Delivery Parts
Choose your Part Name for your 2002 Honda S2000
Air Cleaner Assembly
Air Cleaner Fastener
Air Filter
Air Filter Housing Sleeve
Air Intake Kit
Electric Fuel Pump
Engine Air Filter
Engine Air Intake Hose
Engine Intake Manifold Runner Control Valve
Fuel Filter Washer
Fuel Injection Idle Air Control Valve
Fuel Injection Idle Air Control Valve Gasket
Fuel Injection Pressure Regulator
Fuel Injection Pressure Regulator O-Ring
Fuel Injector Cushion Ring
Fuel Injector O-Ring
Fuel Injector Seal
Fuel Pump Strainer
Fuel Pump Tank Seal
Fuel Tank Cap
Fuel Tank Pressure Sensor
Fuel Tank Vent Valve
Image
Product
Price
- Fuel Cap
- Vented Black Cap
- Standard
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10285948, 1078-290309, 10817, 10819, 10830, 10830D, 10834, 10834Y, 10837, 10869, 11817, 11830, 11834, 11834Y, 11837, 12335028, 12F46, 15001538...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Honda S2000 | L | 1997 | 4 Cyl 2.0L | - |
- Key Vent Fuel Cap
- Vented Black Cap
- Key Vent
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10501, 10501D, 1078-290305, 11501, 12F3PL, 17251F9926, 17501D, 31734, 40900, 4764917AA, 5501, 55010, 5501A, 703-1685, 9MGC900, MGC900, P5501
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Honda S2000 | L | 1997 | 4 Cyl 2.0L | - |
- Locking Fuel Cap
- Vented Black Cap
- Locking
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10501, 10501D, 10504, 10504Y, 10507, 10591, 10591D, 1078-290207, 11504, 11504Y, 11507, 11591, 12F20L, 1H0201553, 307201551, 31778, 31780, 31783...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Honda S2000 | L | 1997 | 4 Cyl 2.0L | - |
- Tethered Fuel Cap
- Vented Black Cap
- Tethered
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10817T, 10819T, 10834T, 10837T, 10868T, 10869T, 172511TG0F, 172514BA0B, 172519DC1C, 290409, 6817T, 703-1888, 9MGC817T, MGC817T
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Honda S2000 | L | 1997 | 4 Cyl 2.0L | - |
- Electric Fuel Pump
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Length: 113.0
- Connector Shape: Rectangle
- Minimum Pressure: 44
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Inlet Type: Strainer
- Maximum Amperage Draw: 5.0
- Average Flow Rating: 29.0
- Inlet Outside Diameter: 11.0
- Wire Quantity: 0
- Average Current Draw: 5.0
- Maximum Pressure: 85.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Mounting Bracket Included: No
- Gasket Or Seal Included: No
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Outlet Type: Hose Bead
-
Features:
- Always be sure to check and clean fuel tank to avoid returns
- Each part undergoes testing to ensure the same fit, form, and function as the OE
- Instructional installation sheets included in every box
- Sparta, distributed by the only OE full-line fuel supplier Delphi, is specifically designed for higher mileage and earlier model vehicles. Turn to the brand backed by the OE experts, who know fit and performance better than anyone.
This Part Fits the Following OEM/Substitute Numbers:
152-0886, 152-0925, 152-0961, 152-0964, 152-0965, 152-0970, 152-0972, 152-0998, 17040-S0X-A00, 17040-S0X-A01, 17040-S10-A10, 17040-S10-C20, 17040-S2A-930, 17040-S30-A31, 17040-S30-A50, 17040-S30-L01, 17040-SR2-A31, 17040-SR3-A31...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Honda S2000 | L | 1997 | In-Tank | 4 Cyl 2.0L | - |
- Electric Fuel Pump
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Length: 113.0
- Connector Shape: Rectangle
- Minimum Pressure: 44
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Inlet Type: Strainer
- Maximum Amperage Draw: 5.0
- Average Flow Rating: 29.0
- Inlet Outside Diameter: 11.0
- Wire Quantity: 0
- Average Current Draw: 5.0
- Maximum Pressure: 85.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Mounting Bracket Included: No
- Gasket Or Seal Included: No
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Outlet Type: Hose Bead
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
152-0886, 152-0925, 152-0961, 152-0964, 152-0965, 152-0970, 152-0972, 152-0998, 17040-S0X-A00, 17040-S0X-A01, 17040-S10-A10, 17040-S10-C20, 17040-S2A-930, 17040-S30-A31, 17040-S30-A50, 17040-S30-L01, 17040-SR2-A31, 17040-SR3-A31...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2002 - Honda S2000 | L | 1997 | In-Tank | 4 Cyl 2.0L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- OE Replacement
- Non-Locking
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Honda S2000 |
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Honda S2000 |
- Push Vent Fuel Cap
- Vented Black Cap
- Push Vent
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
1078-291433, 10819, 10819D, 11819, 12F1P, 31615, 31615D, 3527385, 3542094, 40819, 6819, 6819A, 703-1703, 9MGC819, F32Z9030A, F42Z9030A, F4DZ9030A, F5AZ9030B...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2002 - Honda S2000 | L | 1997 | 4 Cyl 2.0L | - |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing/Hardware; Estimated Horsepower Gain 9.56 HP At 6400 RPM;CARB E.O. D-269-38
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Mini
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 9.56 Hp @ 6400 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Rp-4980
- Item Weight: 10.900 Lbs. (4.9 Kg)
- RPM: 6400
- Product Box Height: 12.250 In. (311mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 12.250 In. (311mm)
- Air Filter Outlet Length: 4.000 In. (102mm)
- Product Box Length: 20.250 In. (514mm)
- Clamp Quantity: 7
- Air Filter Large End Diameter: 5.375 In. (137mm)
- Intake Pipe Color: Black
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 4.000 In. (102mm)
- Horse Power Increase: 10 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Honda S2000 |
Showing 1 - 10 of 44 products
Loading...