2012 Ford F 150 Air and Fuel Delivery Parts
Choose your Part Name for your 2012 Ford F-150
Air Cleaner Assembly
Air Filter
Air Filter Housing Grommet
Air Filter Housing Insulator
Air Filter Housing Lid Clip
Air Filter Housing Sleeve
Air Intake Kit
Direct Injection High Pressure Fuel Pump
Engine Air Duct Clamp
Engine Air Filter
Engine Air Intake Hose
Fuel Filler Neck
Fuel Injection Plenum Gasket
Fuel Injection Plenum Gasket Set
Fuel Injection Throttle Body
Fuel Injection Throttle Body Mounting Gasket
Fuel Injector
Fuel Injector O-Ring Kit
Fuel Pump Bolt
Fuel Pump Driver Module
Fuel Pump Gasket
Fuel Pump Module Assembly
Fuel Pump Relay
Fuel Pump Tank Seal
Fuel Tank Cap
Fuel Tank Strap
Throttle Assist
Turbocharger
Turbocharger Coolant Line
Turbocharger Drain Tube
Turbocharger Gasket
Turbocharger Intercooler Pipe Set
Turbocharger Mounting Bolt
Turbocharger Oil Filter
Turbocharger Oil Line
Turbocharger Oil Line Gasket
Image
Product
Price
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford F-150 | V | 4951 | 8 Cyl 5.0L | 302 |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford F-150 | V | 6210 | 8 Cyl 6.2L | 379 |
- Fuel Injector O-Ring Kit
- 0.296 (in) Inside Diameter x 0.574 (in) Outside Diameter
- FEL-PRO ES 70599 Fuel Injector O-Ring Kit for Ford F-150
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
019.997.13.48112.997, 0199971348112997, 021 198 031 C, 021198031C, 035 906 149 A, 035906149A, 0K2A5-13-253, 0K2A513253, 10031124, 12458114, 12537425, 12570621, 12574292, 12574332, 12575954, 12576479, 12580647, 12581319...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford F-150 | V | 3726 | Upper | 6 Cyl 3.7L | 227 |
- Fuel Injection Plenum Gasket Set
- FEL-PRO MS 97214 Fuel Injection Plenum Gasket Set for Ford Edge
- Product Attributes:
- Grade Type: Premium
-
Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES -- Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE -- Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
711477000, AT4Z-9H486A, AT4Z9H486A, MS19928
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford F-150 | V | 3726 | Upper | 6 Cyl 3.7L | 227 |
- Ford F-150 3.5L EcoBoost Intercooler Pipe Kit, 2011-2014
- Intercooler Pipe Kit, fits Ford F-150 3.5L EcoBoost 2011-2014
- Product Attributes:
- SellingPoint04: No Trimming Of The Engine Cover Or Modifications Necessary For Installation
- TechSpec Pipe Shape: N/a
- SellingPoint05: Includes All Boots Necessary For Easy Installation, Including Couplers To The Intercooler
- SellingPoint06: Includes Mishimoto Silicone Boots With Duracore Technology For Superior Resistance To Heat, Pressure, Fuel, And Oil
- SellingPoint07: Max Gains Of 15whp/21wtq When Using Our Full Kit
- SellingPoint01: Direct Fit For The 2011-2014 Ford F-150 3.5l Ecoboost
- SellingPoint02: 2.5-in Aluminum Hot-side Intercooler Pipes Replace Stock Plastic Pipes
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): N/a
- SellingPoint03: 3-3.5-in Aluminum Cold-side Intercooler Pipes Replace Stock Plastic Pipes
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: P415
- TechSpec Pipe Length: N/a
- SellingPoint08: 10-percent Greater Flow Than Stock
- SellingPoint09: 41-percent And 34-percent Increase In Internal Volume For Hot And Cold-side Pipes, Respectively
- CARB EO Number: D-759-6
- TechSpec Core Type: N/a
- TechSpec Core Height (in): N/a
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): N/a
- TechSpec Pipe Diameter: N/a
- Installation Difficulty: 4
- SellingPoint10: Cnc Quick-disconnect For Maximum Durability, Perfect Fitment And Ease Of Installation On Stock Or Mishimoto Intercooler
- TechSpec Note: N/a
- TechSpec Installation Notes: 27 In-lbs (3nm) Recommended For All T-bolt And Constant-tension T-bolt Clamps. These Clamps Have An Operating Range Of 18-35 In-lbs (2-4nm). Do Not Exceed The Maximum Torque Rating Of 35 In-lbs (4nm).
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: Available In Polished Or Wrinkle Black Powder-coated Finish
- SellingPoint12: Mishimoto Lifetime Warranty
- TechSpec Engine Codes: 3.5l V6 Ecoboost
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): N/a
- TechSpec Applications: 2011-2014 Ford F-150 3.5l V6 Ecoboost
- TechSpec Includes: (1) Aluminum Intercooler Pipe W/ Cnc Quick-disconnect Flange--(1) Aluminum Intercooler Pipe W/ Cnc Iat Sensor Housing--(3) Aluminum Intercooler Pipes--(7) Silicone Boots W/ Duracore Technology--(2) High-torque Worm Gear Clamps--(12) Constant-tension T-bol
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): N/a
- TechSpec Overall Width (in): N/a
- TechSpec Outlet (in): N/a
-
Features:
- No trimming of the engine cover or modifications necessary for installation
- Includes all boots necessary for easy installation, including couplers to the intercooler
- Includes Mishimoto Silicone Boots with DuraCore™ technology for superior resistance to heat, pressure, fuel, and oil
- Max gains of +15whp/+21wtq when using our full kit
- 10% greater flow than stock
- 41% and 34% increase in internal volume for hot and cold&ndash
- 3"-3.5" Aluminum cold-side intercooler pipes replace stock plastic pipes
- side intercooler pipes replace stock plastic pipes
- 2.5" Aluminum hot&ndash
- Direct fit for the 2011-2014 Ford F-150 3.5L EcoBoost
- side pipes, respectively
- CNC quick-disconnect for maximum durability, perfect fitment and ease of installation on stock or Mishimoto intercooler
- Available in polished or wrinkle black powder-coated finish
- Mishimoto Lifetime Warranty
- The Mishimoto 2011?2014 F?150 EcoBoost Intercooler Pipe kit is an ideal upgrade in reliability and performance. The Mishimoto kit features cold-side and hot-side piping in polished aluminum or wrinkle black. Accompanied by silicone couplers with DuraCore? technology, Mishimoto's F?150 EcoBoost intercooler piping is engineered to eliminate restrictive bends while improving durability and airflow. Compared to normal silicone, DuraCore? provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our couplers by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto Constant Tension T?bolt clamps for an accurate and secure installation. Upgrade to the Mishimoto 2011?2014 F?150 EcoBoost Intercooler Pipe Kit and give your truck the efficient, unimpeded airflow it needs to make up to 15 more horsepower and 21 Ft/lbs more torque. To further improve your charge?air system, pair this pipe kit with the Mishimoto 2011?2014 F?150 EcoBoost performance intercooler. Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler pipe kit again.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford F-150 | V | 3496 | GAS | 6 Cyl 3.5L | 213 |
- Ford F-150 3.5L EcoBoost Cold-Side Intercooler Pipe Kit, 2011-2014
- Cold-Side Intercooler Pipe Kit, fits Ford F-150 3.5L EcoBoost 2011-2014
- Product Attributes:
- SellingPoint04: No Trimming Or Modifications Necessary For Installation
- TechSpec Pipe Shape: N/a
- SellingPoint05: Cnc Quick-disconnect For Maximum Durability, Perfect Fitment, And Ease Of Installation On Stock Or Mishimoto Intercooler
- SellingPoint06: Includes Mishimoto Silicone Boots With Duracore Technology For Superior Resistance To Heat, Pressure, Fuel, And Oil
- SellingPoint07: Max Gains Of 15whp/21wtq When Using Mishimoto's Full Kit
- SellingPoint01: Direct Fit For The 2011-2014 Ford F-150 3.5l Ecoboost
- SellingPoint02: 34-percent Greater Internal Volume Than Stock
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): N/a
- SellingPoint03: 3-3.5-in Aluminum Intercooler Pipes Replace Weak Stock Plastic Pipes
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: P415
- TechSpec Pipe Length: N/a
- SellingPoint08: Available In Polished Or Wrinkle Black Powder-coated Finish
- SellingPoint09: Mishimoto Lifetime Warranty
- CARB EO Number: D-759-6
- TechSpec Core Type: N/a
- TechSpec Core Height (in): N/a
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): N/a
- TechSpec Pipe Diameter: N/a
- Installation Difficulty: 4
- SellingPoint10: N/a
- TechSpec Note: N/a
- TechSpec Installation Notes: 27 In-lbs (3nm) Recommended For All T-bolt And Constant-tension T-bolt Clamps. These Clamps Have An Operating Range Of 18-35 In-lbs (2-4nm). Do Not Exceed The Maximum Torque Rating Of 35 In-lbs (4nm).
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: 3.5l V6 Ecoboost
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): N/a
- TechSpec Applications: 2011-2014 Ford F-150 3.5l V6 Ecoboost--2015-2017 Ford Expedition 3.5l V6 Ecoboost--2015-2017 Lincoln Navigator 3.5l V6 Ecoboost
- TechSpec Includes: (1) Aluminum Intercooler Pipe W/ Cnc Quick-disconnect Flange--(1) Aluminum Intercooler Pipe W/ Cnc Iat Sensor Housing--(2) Silicone Boots W/ Duracore Technology--(4) Constant-tension T-bolt Clamps--mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3.5
- TechSpec Overall Width (in): N/a
- TechSpec Outlet (in): 3
-
Features:
- Direct fit for the 2011-2014 Ford F-150 3.5L EcoBoost
- 34% greater internal volume than stock
- 3"-3.5" Aluminum intercooler pipes replace weak stock plastic pipes
- No trimming or modifications necessary for installation
- CNC quick-disconnect for maximum durability, perfect fitment, and ease of installation on stock or Mishimoto intercooler
- Includes Mishimoto Silicone Boots with DuraCore™ technology for superior resistance to heat, pressure, fuel, and oil
- Max gains of +15whp/+21wtq when using Mishimoto's full kit
- Available in polished or wrinkle black powder-coated finish
- Mishimoto Lifetime Warranty
- The Mishimoto 2011?2014 F?150 EcoBoost Cold?Side Intercooler Pipe Kit is an ideal upgrade in reliability and performance. The Mishimoto kit features polished aluminum or wrinkle black piping accompanied by silicone couplers with DuraCore? technology. Engineered to eliminate restrictive bends, this cold?side pipe kit increases internal volume by 34-percent when compared to stock. The DuraCore? couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our couplers by preventing leaks and blowouts. To add even more reliability, Mishimoto's constant tension T?bolt clamps are included for an accurate and secure installation.Pairing this kit with our Mishimoto 2011?2014 F?150 EcoBoost hot?side intercooler pipe kit gives your truck the efficient, unimpeded airflow it needs to make up to 15 more horsepower and 21 ft/lbs more torque. To further improve your charge?air system, combine this pipe kit with the Mishimoto 2011?2014 F?150 EcoBoost performance intercooler. Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler pipe kit again.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford F-150 | V | 3496 | GAS | 6 Cyl 3.5L | 213 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 11.05 HP At 4318 RPM;CARB E.O. D-269-48
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 11.05 Hp @ 4318 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Ru-5173
- Item Weight: 12.000 Lbs. (5.4 Kg)
- RPM: 4318
- Product Box Height: 15.600 In. (396mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 20.200 In. (513mm)
- Air Filter Outlet Length: 0.625 In. (16mm)
- Product Box Length: 24.200 In. (615mm)
- Clamp Quantity: 5
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 11 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 3
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Ford F-150 | V | 3496 | 6 Cyl 3.5L | FX2 | 213 |
- FRAM, CA10262, Air Filter
- Flexible Panel Air Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Gasket Or Seal Included: No
- Shape: Square
- Flexible or Rigid: Flexible
- Grade Type: Regular
- Replacable Filter: Yes
- Grade: Advanced
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Washable: No
- Filter Media Material: Cellulose
-
Features:
- Keep your engine running smoothly by preventing damaging particles from entering your vehicle’s engine
- Ensures maximum airflow to prevent engine wear
- Installs quickly in as little as 5 minutes
- Protects up to 12 months or 12,000 miles (19,000 kilometers)
- FRAM Extra Guard® engine air filters are engineered to protect your engine from harmful contaminants. Replacing an air filter with FRAM Extra Guard can help improve horsepower, acceleration, and engine performance. To prevent engine wear, FRAM recommends changing your air filter every 12 months.
This Part Fits the Following OEM/Substitute Numbers:
11110284, 1330, 29883, 33-2365, 33-2385, 42331, 49088, 49883, 5372WS, 69883, 7C3Z-9601-A, 7R3V-9601-AA, 83883, 9883, A2883, A3453C, A35642, A36105...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ford F-150 | V | 6210 | 8 Cyl 6.2L | 379 |
- Fuel Pump Module Assembly
- Product Attributes:
- Fuel Filter Included: Yes
- Connector Gender: Female
- Voltage: 13
- Negative Ground: No
- Grade Type: Standard Replacement
- Mounting Hardware Included: No
- Fuel Type: Flex
- Gasket Or Seal Material: Nitrile Rubber
- Connector Shape: Rectangle
- Fuel Tank Pressure Sensor Included: No
- Minimum Pressure: 58
- Outlet Quantity: 2
- Installation Warnings: No
- Resistance Ohms Empty: 180
- Lock Ring Included: No
- Average Flow Rating: 37
- Average Current Draw: 11
- Maximum Pressure: 109
- Pump Type: Electric
- Wire Harness Included: No
- Fuel Sending Unit Included: Yes
- Pump Design: Turbine
- Connector Quantity: 1
- Outlet Outside Diameter: 0.375
- Terminal Quantity: 4
- Gasket Or Seal Included: Yes
- Internal Or External Strainer: Internal
- Terminal Type: Blade
- Terminal Gender: Male
- Regulator Included: Yes
- Strainer Included: Yes
-
Features:
- Instructional installation sheets included in every box
- Each part undergoes testing to ensure the same fit, form, and function as the OE
- Always be sure to check and clean fuel tank to avoid returns
- Sparta, distributed by the only OE full-line fuel supplier Delphi, is specifically designed for higher mileage and earlier model vehicles. Turn to the brand backed by the OE experts, who know fit and performance better than anyone.
This Part Fits the Following OEM/Substitute Numbers:
9L3Z 9H307-D, A30439, C0130M, E2530M, P76466M, P76817, PFS-488, SP1395, SP2094M, USEP2530M
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | Wheel FeedBase | CID |
|---|---|---|---|---|---|---|---|
| 2012 - Ford F-150 | V | 3726 | Canada | 6 Cyl 3.7L | STX | 126.0 | 227 |
- Fuel Pump Module Assembly
- Product Attributes:
- Fuel Filter Included: Yes
- Connector Gender: Female
- Negative Ground: No
- Grade Type: Standard Replacement
- Mounting Hardware Included: No
- Fuel Type: Gas
- Gasket Or Seal Material: Nitrile Rubber
- Fuel Tank Pressure Sensor Included: No
- Minimum Pressure: 65
- Outlet Quantity: 2
- Installation Warnings: No
- Resistance Ohms Empty: 180
- Lock Ring Included: No
- Average Flow Rating: 80
- Maximum Pressure: 78
- Pump Type: Electric
- Wire Harness Included: No
- Fuel Sending Unit Included: Yes
- Pump Design: Turbine
- Connector Quantity: 1
- Outlet Outside Diameter: 0.375
- Terminal Quantity: 4
- Gasket Or Seal Included: Yes
- Internal Or External Strainer: Internal
- Terminal Type: Blade
- Terminal Gender: Male
- Regulator Included: Yes
- Strainer Included: Yes
-
Features:
- Instructional installation sheets included in every box
- Always be sure to check and clean fuel tank to avoid returns
- Each part undergoes testing to ensure the same fit, form, and function as the OE
- Sparta, distributed by the only OE full-line fuel supplier Delphi, is specifically designed for higher mileage and earlier model vehicles. Turn to the brand backed by the OE experts, who know fit and performance better than anyone.
This Part Fits the Following OEM/Substitute Numbers:
9L3Z 9A299-E, A33142, BL3Z 9H307-C, C0155M, CL3Z 9H307-A, E2588M, P76759M, PFS-930, PS-344, SP2464M, USEP2588M
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2012 - Ford F-150 | V | 3496 | Canada | 6 Cyl 3.5L | RWD | 213 |
Showing 1 - 10 of 110 products
Loading...