1992 Chevrolet Corvette Air-and-Fuel-Delivery Parts

Choose your Part Name for your 1992 Chevrolet Corvette

A/C Line O-Ring Kit A/C Orifice Tube Accessory Drive Belt Accessory Drive Belt Idler Pulley Accessory Drive Belt Tensioner Pulley Air Charge Temperature Sensor Air Distribution Duct Clip Air Filter Antenna Adapter Automatic Transmission Dipstick Automatic Transmission Extension Housing Seal Automatic Transmission Fluid Automatic Transmission Indicator Light Bulb Automatic Transmission Kickdown Automatic Transmission Manual Shaft Seal Automatic Transmission Oil Pump Seal Automatic Transmission Shift Lever Automatic Transmission Shift Lever Kit Axle Differential Bearing Axle Differential Bearing Race Back Up Light Bulb Brake Bleeder Screw Brake Fluid Brake Hydraulic Hose Brake Hydraulic Hose Lock Clip Brake Light Bulb Car Cover Cargo Area Liner Catalytic Converter Center High Mount Stop Light Bulb Clutch Alignment Tool Clutch Flywheel Bolt Clutch Flywheel Bolt Set Clutch Master Cylinder Clutch Pilot Bearing Clutch Slave Cylinder Console Trim Panel Clip Courtesy Light Bulb Differential Differential Drive Pinion Gear Nut Differential Pinion Bearing Differential Pinion Race Differential Pinion Repair Sleeve Differential Pinion Seal Disc Brake Caliper Bolt Disc Brake Caliper Seal Kit Disc Brake Hardware Kit Disc Brake Pad Set Disc Brake Rotor Distributor Door Hinge Pin and Bushing Kit Door Lock Actuator Motor Door Sill Plate Clip Drive Axle Shaft Seal Drive Shaft Pinion Yoke Washer Electric Fuel Pump Engine Air Filter Engine Camshaft Bearing Set Engine Compartment Light Bulb Engine Connecting Rod Bearing Engine Connecting Rod Bearing Pair Engine Coolant / Antifreeze Engine Coolant Outlet O-Ring Engine Coolant Temperature Sensor Engine Coolant Thermostat Engine Coolant Thermostat Gasket Engine Coolant Thermostat Housing Engine Coolant Thermostat Housing Gasket Engine Coolant Thermostat Seal Engine Cooling Fan Motor Engine Crankshaft Main Bearing Set Engine Crankshaft Seal Engine Crankshaft Seal Kit Engine Cylinder Head Bolt Engine Cylinder Head Bolt Set Engine Oil Dipstick Engine Oil Drain Plug Engine Oil Drain Plug Gasket Engine Oil Filler Cap Engine Oil Filter Engine Oil Filter Adapter Gasket Engine Oil Filter Remote Mounting Kit Engine Oil Level Sensor Engine Oil Pan Gasket Engine Oil Pan Gasket Set Engine Oil Pump Engine Oil Pump Pickup Tube and Screen Engine Oil Pump Shaft Retainer Engine Rocker Arm Engine Timing Cover Gasket Engine Timing Cover Repair Sleeve Engine Timing Crankshaft Gear Engine Timing Crankshaft Sprocket Engine Valve Cover Engine Valve Cover Gasket Engine Valve Cover Hold Down Tab Engine Valve Lifter Engine Water Pump Engine Water Pump Gasket Exhaust Clamp Exhaust Gas Recirculation (EGR) Valve Gasket Exhaust Header Bolt Exhaust Header Gasket Exhaust System Kit Exterior Multi-Purpose LED Flood Light Floor Carpet Clip Fog Light Fog Light Bulb Fuel Filler Door Retaining Clip Fuel Filter Fuel Filter Washer Fuel Injection Idle Air Control Valve Fuel Injection Pressure Regulator Fuel Injection Throttle Body Mounting Gasket Fuel Injector Control Module Clip Fuel Injector O-Ring Fuel Injector O-Ring Kit Fuel Line Connector Fuel Pump Strainer Fuel Tank Cap Fuel Tank Sender Assembly Glove Box Light Bulb HVAC Blend Door Actuator HVAC Blower Motor HVAC Heater Hose HVAC Heater Hose Connector HVAC Heater Hose Retainer Clip HVAC Pressure Switch Hard Top Storage Cart Headlight Bezel Nut Headlight Bulb Headlight Conversion Kit Headlight Lens Headlight Set High Beam Indicator Light Bulb Hood Light Pod Hood Stop Bumper Retainer Ignition Coil Ignition Lock Assembly Ignition Lock Cylinder Instrument Panel Light Bulb Interior Panel Retainer License Plate Light Bulb Light Bar Manual Transmission Fluid Manual Transmission Output Shaft Seal Map Light Bulb Multi-Purpose Relay Oxygen Sensor Parking Brake Cable Parking Brake Indicator Light Bulb Parking Light Bulb Power Steering Fluid Power Window Motor Radiator Cap Radiator Drain Petcock Radiator Support Baffle Bolt Radiator Support Baffle Clip Radio Installation Kit Seat Belt Warning Light Bulb Secondary Air Injection Check Valve Serpentine Belt Side Marker Light Bulb Spark Plug Spark Plug Wire Holder Spark Plug Wire Set Starter Motor Steering Tie Rod End Steering Tie Rod End Boot Suspension Ball Joint Suspension Ball Joint Boot Kit Suspension Bushing Kit Tail Light Bulb Tent Trailer Hitch Trailer Wire Converter Transmission Clutch Kit Transmission Filter Kit Transmission Oil Pan Gasket Trunk Light Bulb Trunk or Cargo Area Light Turn Signal Indicator Light Bulb Turn Signal Light Bulb Universal Joint Vehicle-Mounted Spotlight Wheel Bearing and Hub Assembly Wheel Lock Wheel Lock Set Wheel Lug Nut Wheel Lug Stud Wheel Nut Window Motor Window Shade Windshield Washer Pump Windshield Wiper Blade Windshield Wiper Motor Wiper Blade

Showing 1 - 10 of 700 products
Image
SKU
Product
Rating
Price

Denso
  • Spark Plug Platinum TT
  • Gap 0.040 Platinum TT - Twin-Tip Technology Design with Platinum Center Electrode and Titanium Enhanced Ground Strap
  • Spark Plug Platinum TT
  • Spark Plug - Platinum TT
  • Product Attributes:
    • Seat Type: Flat
    • Ground Electrode Quantity: 1
    • Center Electrode Core Material: Copper
    • Hex Size: 16
    • Reach: 19.0
    • Center Electrode Tip Material: Platinum
    • Ground Electrode Tip Design: Titanium Enhanced Twin-tip
    • Manufacturer Heat Range: 16
    • Ground Configuration: Twin-tip
    • Pre-Gap Size: 1.0
    • Resistance: 5000.0
    • Ground Electrode Core Material: Nickel
    • Thread Diameter: 14.0
  • Twin-Tip design enables faster flame propagation for more complete combustion.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.

This Part Fits the Following OEM/Substitute Numbers:
0000-18-BP01, 0000-18-F287, 0000-18-JE41, 0000-18-KJ13, 003 159 31 03, 003 159 54 03, 003 159 66 03, 003 159 67 03, 003 159 68 03, 003 159 71 03, 003 159 81 03, 003 159 94 03, 003 159 97 03, 004 159 07 03, 004 159 19 03, 09482-00549, 0K23A-18-110, 101 000 044 AA...VIEW MORE

Additional Fitment Information:
Vehicle Cylinder Head Type
1992 - Chevrolet Corvette DOHC

NGK
  • NGK G-Power Platinum Spark Plug
  • Gap 0.050"
  • G-Power Spark Plug
  • Product Attributes:
    • Center Electrode Design: Fine Wire
    • Center Electrode Insulator Tip Projection:
      • 0.12
      • 3.0
    • Washer Included: Yes
    • Electrical Terminal Type: Non-removable Nut
    • Grade Type: Standard Replacement
    • Service Number: Bkr5egp
    • Washer Type: Crush
    • Ground Electrode Tip Material: Nickel
    • Short Style Spark Plug: No
    • Skirt: No
    • Center Electrode Core Material: Copper
    • Part Number: Bkr5egp
    • Resistor Type: Yes
    • Stock Number: 7090
    • Ground Electrode Tip Design: Trapezoid
    • Pre-Gap Size:
      • .040
      • 1.0
    • Ground Electrode Core Material: Nickel
    • Material Grade: Platinum
    • Center Electrode Projection: Mid Projection
    • Seat Type: Flat
    • Ground Electrode Quantity: 1
    • Insulator Material: Ceramic
    • Hex Size: 5/8" (16mm)
    • Reach:
      • 0.750
      • 19.0
    • Center Electrode Tip Material: Platinum
    • Skirt Length: 0.0
    • Manufacturer Heat Range: 5
    • Ground Configuration: J-gap
    • Resistance: 5000.0
    • Insulator Height:
      • 1.99
      • 50.5
    • Thread Diameter:
      • 0.551
      • 14.0
  • Features:
    • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
    • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
    • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
    • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
    • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
    • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
3034, 3412, 3412-2, 3436, 3436-2, 3980, 41-800, 4202, 4503, 4507, 4701, 6702, 6726, 6730, 696202, 7090, AGSP32FSM, AP3924...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Engine VIN CID
1992 - Chevrolet Corvette V - 8 Cyl 5.7L J 350

NGK
  • NGK V-Power Spark Plug
  • Gap 0.050"
  • V-Power Spark Plug
  • Product Attributes:
    • Center Electrode Design: Standard
    • Center Electrode Insulator Tip Projection:
      • 0.12
      • 3.0
    • Washer Included: Yes
    • Electrical Terminal Type: Non-removable Nut
    • Grade Type: Standard Replacement
    • Service Number: Bkr5e-11
    • Washer Type: Crush
    • Ground Electrode Tip Material: Nickel
    • Short Style Spark Plug: No
    • Skirt: No
    • Center Electrode Core Material: Copper
    • Part Number: Bkr5e-11
    • Resistor Type: Yes
    • Stock Number: 6953
    • Ground Electrode Tip Design: Standard
    • Pre-Gap Size:
      • .044
      • 1.1
    • Ground Electrode Core Material: Nickel
    • Material Grade: Nickel/copper
    • Center Electrode Projection: Mid Projection
    • Seat Type: Flat
    • Ground Electrode Quantity: 1
    • Insulator Material: Ceramic
    • Hex Size: 5/8" (16mm)
    • Reach:
      • 0.750
      • 19.0
    • Center Electrode Tip Material: Nickel
    • Skirt Length: 0.0
    • Manufacturer Heat Range: 5
    • Ground Configuration: J-gap
    • Resistance: 5000.0
    • Insulator Height:
      • 1.99
      • 50.5
    • Thread Diameter:
      • 0.551
      • 14.0
  • Features:
    • NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
    • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
    • RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
    • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
    • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
    • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
  • NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
0000-18-BP01, 09482-00566, 12599-6771-6, 1765234, 1835270T, 1844168T, 1P09-18-110, 1Y09, 21025103, 22401 55Y15, 22401-50Y05, 2240150Y05, 2240155Y75, 22401KA210, 2430, 2FR3LS6, 3130, 3924...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Engine VIN CID
1992 - Chevrolet Corvette V - 8 Cyl 5.7L J 350

Denso
  • Spark Plug Iridium Power
  • Gap 0.044 Iridium Power - Performance Upgrade with World's Smallest Center Electrode (0.4 mm Dia.) & Tapered Tip Patented U-Groove Design & Patented Ir Alloy (90% Ir)
  • Spark Plug Iridium Power
  • Spark Plug - Iridium Power
  • Product Attributes:
    • Seat Type: Flat
    • Ground Electrode Quantity: 1
    • Center Electrode Core Material: Copper
    • Hex Size: 16
    • Reach: 19.0
    • Center Electrode Tip Material: Iridium
    • Ground Electrode Tip Design: Tapercut, U-groove
    • Manufacturer Heat Range: 16
    • Ground Configuration: Standard
    • Pre-Gap Size: 1.1
    • Resistance: 5000.0
    • Ground Electrode Core Material: Nickel
    • Thread Diameter: 14.0
  • Increased performance with World's smallest Iridium Center Eletrode (0.4mm).
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
0000-18-BP01, 0000-18-JE41, 003 159 31 03, 003 159 54 03, 003 159 66 03, 003 159 67 03, 003 159 68 03, 003 159 71 03, 003 159 81 03, 003 159 94 03, 004 159 07 03, 004 159 19 03, 09482-00549, 0K23A-18-110, 101 000 044 AA, 101 905 611 A, 101 905 631 A, 101 905 631 F...VIEW MORE

Additional Fitment Information:
Vehicle Cylinder Head Type
1992 - Chevrolet Corvette DOHC

NGK
  • NGK G-Power Platinum Spark Plug
  • Gap 0.050"
  • G-Power Spark Plug
  • Product Attributes:
    • Center Electrode Design: Fine Wire
    • Center Electrode Insulator Tip Projection:
      • 0.16
      • 4.0
    • Washer Included: No
    • Electrical Terminal Type: Non-removable Nut
    • Grade Type: Standard Replacement
    • Service Number: Tr55gp
    • Ground Electrode Tip Material: Nickel
    • Short Style Spark Plug: No
    • Skirt: No
    • Center Electrode Core Material: Copper
    • Part Number: Tr55gp
    • Resistor Type: Yes
    • Stock Number: 3403
    • Ground Electrode Tip Design: Trapezoid
    • Pre-Gap Size:
      • .060
      • 1.5
    • Ground Electrode Core Material: Nickel
    • Material Grade: Platinum
    • Center Electrode Projection: Mid Projection
    • Seat Type: Tapered
    • Ground Electrode Quantity: 1
    • Insulator Material: Ceramic
    • Hex Size: 5/8" (16mm)
    • Reach:
      • 0.689
      • 17.5
    • Center Electrode Tip Material: Platinum
    • Skirt Length: 0.0
    • Manufacturer Heat Range: 5
    • Ground Configuration: J-gap
    • Resistance: 5000.0
    • Insulator Height:
      • 2.07
      • 52.5
    • Thread Diameter:
      • 0.551
      • 14.0
  • Features:
    • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
    • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
    • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
    • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
    • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
    • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
12, 14, 3013, 3015, 3015-2, 3401, 3401-2, 3403, 3408, 3408-2, 3983, 3983-2, 41-902, 4511, 6701, 6703, 6706, 6709...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Engine VIN CID
1992 - Chevrolet Corvette V - 8 Cyl 5.7L P 350

Trico
  • 19" TRICO Exact Fit Wiper Blade
  • Check for Hood Clearance OE Design this is a 19'' 3/16 Side Lock Conventional Wiper Blade
  • 9mm Hook, 9x4 Hook, 3/16 Side Lock
  • TRICO Exact Fit Wiper Blade
  • Product Attributes:
    • Product Width (in): 0.945
    • Salability Restrictions: N
    • Product Weight (lb): 0.3600
    • Blade Material: Natural Rubber
    • AAP_UDA_121: Y
    • AAP_UDA_4: 110
    • AAP_UDA_122: N
    • AAP_UDA_123: N
    • Engine Specific: N
    • AAP_UDA_124: N
    • ASIN Parent: B000cb6aco
    • AAP_UDA_120: Y
    • AAP_UDA_129: N
    • Frame Color: Black
    • AAP_UDA_125: N
    • Blade Design: Conventional
    • AAP_UDA_126: N
    • AAP_UDA_127: N
    • AAP_UDA_128: N
    • Adapter Type: Pre-attached Adapter
    • AAP_UDA_33: 05071984
    • Adapters Required: Yes
    • Snowmobile: N
    • AAP_UDA_32: Xfi
    • AAP_UDA_31: 326
    • Shipping Exclusions: N
    • High Performance: Y
    • Is Or Contains A Bulb: No
    • Adapters Included: Yes
    • Non-Vehicle Specific: N
    • Aggric Equipment: N
    • Wiper Blade Connection Type: 3/16 Side Lock, 7mm Bayonet, 9x3 Hook, 9x4 Hook
    • AAP_UDA_119: Y
    • Product Height (in): 19.000
    • Transmission Specific: N
    • Refillable: Yes
    • Small Engine: N
    • AAP_UDA_22: 1
    • Product Length/Depth (in): 0.689
    • Number of Wiping Edges: 1
    • Frame Material: Steel
    • Pressure Point Quantity: 6
    • Contains Electronic Components: No
    • Marine: N
    • Is Item A Chemical: No
    • Blade Type: Conventional
    • AAP_UDA_12: Ea
    • Car or Light Truck: Y
    • Personal Watercraft: N
    • Winter Blade: No
    • Is Or Contains A Battery: No
    • Variable Speed: No
    • ASIN Child: B000cb6aco
    • Attached Spoiler/Aerofoil: No
    • AAP_UDA_132: N
    • California Proposition 65 Warning Type: N/a
    • AAP_UDA_133: N
    • Motorcycle ATV: N
    • AAP_UDA_130: Y
    • AAP_UDA_131: N
    • Industrial Off Highway Equip: N
  • Features:
    • Original Factory Performance Blade
    • Original replacement wiper designed to exactly match your car’s original specifications as when your vehicle was new.
    • Superior performance all weather windshield wiper.
    • Durable steel frame for reliable quality.
    • Pre-assembled connector for quick and easy, one-step wiper replacement every time. Provides critical rear visibility in today's aggressive driving environment.
  • TRICO ExactFit Conventional wiper blades are easy to install and designed to match OE specifications and standards. These wiper blades live up to their name because they feature a pre-attached adaptor specific to your vehicle for an exact fit and easy installation.

Additional Fitment Information:
Vehicle Position
1992 - Chevrolet Corvette Front Left

Trico
  • 19" TRICO Exact Fit Wiper Blade
  • Check for Hood Clearance OE Design this is a 19'' 3/16 Side Lock Conventional Wiper Blade
  • 9mm Hook, 9x4 Hook, 3/16 Side Lock
  • TRICO Exact Fit Wiper Blade
  • Product Attributes:
    • Product Width (in): 0.945
    • Salability Restrictions: N
    • Product Weight (lb): 0.3600
    • Blade Material: Natural Rubber
    • AAP_UDA_121: Y
    • AAP_UDA_4: 110
    • AAP_UDA_122: N
    • AAP_UDA_123: N
    • Engine Specific: N
    • AAP_UDA_124: N
    • ASIN Parent: B000cb6aco
    • AAP_UDA_120: Y
    • AAP_UDA_129: N
    • Frame Color: Black
    • AAP_UDA_125: N
    • Blade Design: Conventional
    • AAP_UDA_126: N
    • AAP_UDA_127: N
    • AAP_UDA_128: N
    • Adapter Type: Pre-attached Adapter
    • AAP_UDA_33: 05071984
    • Adapters Required: Yes
    • Snowmobile: N
    • AAP_UDA_32: Xfi
    • AAP_UDA_31: 326
    • Shipping Exclusions: N
    • High Performance: Y
    • Is Or Contains A Bulb: No
    • Adapters Included: Yes
    • Non-Vehicle Specific: N
    • Aggric Equipment: N
    • Wiper Blade Connection Type: 3/16 Side Lock, 7mm Bayonet, 9x3 Hook, 9x4 Hook
    • AAP_UDA_119: Y
    • Product Height (in): 19.000
    • Transmission Specific: N
    • Refillable: Yes
    • Small Engine: N
    • AAP_UDA_22: 1
    • Product Length/Depth (in): 0.689
    • Number of Wiping Edges: 1
    • Frame Material: Steel
    • Pressure Point Quantity: 6
    • Contains Electronic Components: No
    • Marine: N
    • Is Item A Chemical: No
    • Blade Type: Conventional
    • AAP_UDA_12: Ea
    • Car or Light Truck: Y
    • Personal Watercraft: N
    • Winter Blade: No
    • Is Or Contains A Battery: No
    • Variable Speed: No
    • ASIN Child: B000cb6aco
    • Attached Spoiler/Aerofoil: No
    • AAP_UDA_132: N
    • California Proposition 65 Warning Type: N/a
    • AAP_UDA_133: N
    • Motorcycle ATV: N
    • AAP_UDA_130: Y
    • AAP_UDA_131: N
    • Industrial Off Highway Equip: N
  • Features:
    • Original Factory Performance Blade
    • Original replacement wiper designed to exactly match your car’s original specifications as when your vehicle was new.
    • Superior performance all weather windshield wiper.
    • Durable steel frame for reliable quality.
    • Pre-assembled connector for quick and easy, one-step wiper replacement every time. Provides critical rear visibility in today's aggressive driving environment.
  • TRICO ExactFit Conventional wiper blades are easy to install and designed to match OE specifications and standards. These wiper blades live up to their name because they feature a pre-attached adaptor specific to your vehicle for an exact fit and easy installation.

This Part Fits the Following OEM/Substitute Numbers:
000067019AMV, 000067H19 MV, 160-1119, 160-1319, 160-1419, 160-2019, 160-2319, 19-1, 19HD, 22-20, 40719A, 6-019-1, 60191, 700-19-1, 700-19-2, 73-19, 75-19, 76-19...VIEW MORE

Additional Fitment Information:
Vehicle Position
1992 - Chevrolet Corvette Front Right

NGK
  • NGK Standard Spark Plug
  • Gap 0.050" OE Equivalent Design
  • Standard Spark Plug
  • Product Attributes:
    • Center Electrode Design: Standard
    • Center Electrode Insulator Tip Projection:
      • 0.12
      • 3.0
    • Washer Included: Yes
    • Electrical Terminal Type: Non-removable Nut
    • Grade Type: Standard Replacement
    • Service Number: Bkr5es-11
    • Washer Type: Crush
    • Ground Electrode Tip Material: Nickel
    • Short Style Spark Plug: No
    • Skirt: No
    • Center Electrode Core Material: Copper
    • Part Number: Bkr5es-11
    • Resistor Type: Yes
    • Stock Number: 2382
    • Ground Electrode Tip Design: Standard
    • Pre-Gap Size:
      • .044
      • 1.1
    • Ground Electrode Core Material: Nickel
    • Material Grade: Nickel/copper
    • Center Electrode Projection: Mid Projection
    • Seat Type: Flat
    • Ground Electrode Quantity: 1
    • Insulator Material: Ceramic
    • Hex Size: 5/8" (16mm)
    • Reach:
      • 0.750
      • 19.0
    • Center Electrode Tip Material: Nickel
    • Skirt Length: 0.0
    • Manufacturer Heat Range: 5
    • Ground Configuration: J-gap
    • Resistance: 5000.0
    • Insulator Height:
      • 1.99
      • 50.5
    • Thread Diameter:
      • 0.551
      • 14.0
  • Features:
    • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
    • RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
    • NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
    • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
    • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
    • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • NGK Standard spark plugs (in the iconic NGK 'yellow box' packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
04887031, 1765269, 18814-11051, 22401-85E15, 22401-85E75, 2382, 3926, 3926BP, 3926DP2, 3927, 4887031, 5-86121749, 5-86121749-0, K5RTC-11, K5RTC11, K5TC

Additional Fitment Information:
Vehicle Block CC Engine Engine VIN CID
1992 - Chevrolet Corvette V - 8 Cyl 5.7L J 350

NGK
  • NGK Iridium IX Spark Plug
  • Gap 0.050"
  • Iridium IX Spark Plug
  • Product Attributes:
    • Center Electrode Design: Fine Wire
    • Center Electrode Insulator Tip Projection:
      • 0.14
      • 3.5
    • Washer Included: Yes
    • Electrical Terminal Type: Non-removable Nut
    • Grade Type: Performance
    • Service Number: Bkr5eix-11
    • Washer Type: Crush
    • Ground Electrode Tip Material: Nickel
    • Short Style Spark Plug: No
    • Skirt: No
    • Center Electrode Core Material: Copper
    • Part Number: Bkr5eix-11
    • Resistor Type: Yes
    • Stock Number: 5464
    • Ground Electrode Tip Design: Taper Cut
    • Pre-Gap Size:
      • .044
      • 1.1
    • Ground Electrode Core Material: Nickel
    • Material Grade: Iridium
    • Center Electrode Projection: Mid Projection
    • Seat Type: Flat
    • Ground Electrode Quantity: 1
    • Insulator Material: Ceramic
    • Hex Size: 5/8" (16mm)
    • Reach:
      • 0.750
      • 19.0
    • Center Electrode Tip Material: Iridium
    • Skirt Length: 0.0
    • Manufacturer Heat Range: 5
    • Ground Configuration: J-gap
    • Resistance: 5000.0
    • Insulator Height:
      • 1.99
      • 50.5
    • Thread Diameter:
      • 0.551
      • 14.0
  • Features:
    • TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
    • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
    • IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
    • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
    • SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
    • RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
  • NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode's durability is six times harder than platinum. Iridium alloy's extremely high melting point is perfect for today's engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
  • This item must be purchased in quantities of 4

This Part Fits the Following OEM/Substitute Numbers:
0000-18-JE41, 1765267, 1UN9-18-110, 3160, 3161, 3166, 3412, 4202, 4418, 4701, 5303, 5464, 5603, 9003, 9003S, 9600, 9652, 98079-5514E-HE...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine Engine VIN CID
1992 - Chevrolet Corvette V - 8 Cyl 5.7L J 350

Trico
  • 19" TRICO 30 Series Wiper Blade
  • Check for Hood Clearance OE Design this is a 19'' 3/16 Side Lock Conventional Wiper Blade
  • Bayonet Arms (8);Large J-Hooks (2);Large Pin Arms (3);Small J-Hooks (6);Small Pin Arms (7)
  • TRICO 30-Series Wiper Blade
  • Product Attributes:
    • Salability Restrictions: N
    • Number of Wiping Edges: 1
    • Blade Material: Natural Rubber
    • Frame Material: Steel
    • AAP_UDA_4: 110
    • Pressure Point Quantity: 6
    • Contains Electronic Components: No
    • Engine Specific: N
    • AAP_UDA_129: N
    • Frame Color: Black
    • AAP_UDA_125: N
    • AAP_UDA_126: N
    • AAP_UDA_127: N
    • Is Item A Chemical: No
    • Blade Type: Conventional
    • Adapter Type: Pre-attached Adapter
    • Adapters Required: Yes
    • Snowmobile: N
    • Personal Watercraft: N
    • Winter Blade: No
    • Is Or Contains A Battery: No
    • Variable Speed: No
    • Shipping Exclusions: N
    • High Performance: Y
    • Attached Spoiler/Aerofoil: No
    • AAP_UDA_132: N
    • California Proposition 65 Warning Type: N/a
    • AAP_UDA_133: N
    • Is Or Contains A Bulb: No
    • Adapters Included: Yes
    • Motorcycle ATV: N
    • Non-Vehicle Specific: N
    • AAP_UDA_130: Y
    • AAP_UDA_131: N
    • Wiper Blade Connection Type: 3/16 Side Lock, 7mm Bayonet, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook, Pin Type Side Lock
    • AAP_UDA_119: Y
    • Transmission Specific: N
    • Refillable: Yes
    • Small Engine: N
  • Features:
    • Available in retail and bulk packaging
    • Universal Steel Frame Blade
    • Engineered to provide better windshield wrap
    • Pre-attached universal adaptor fits 9mm hook, 9x4 hook, side lock and bayonet arms
    • Precision-cut rubber edge creates superior clean windshield
    • Available in lengths from 11” to 28”
  • The aerodynamic steel frame in TRICO 30-series wiper blades delivers exceptional strength and durability and is engineered to wrap to curved windshields.

This Part Fits the Following OEM/Substitute Numbers:
01119, 11191, 14C-19, 19, 19192670, 20191, 30-190, 30-192RF, 30-193PC, 31-19, 31-190, 3119, 40519, 500-19, 600-19, 700219, 8-4419, 836430...VIEW MORE

Additional Fitment Information:
Vehicle Position
1992 - Chevrolet Corvette Front Left
Showing 1 - 10 of 700 products

Loading...