1985 Subaru DL Belts and Cooling Parts
Choose your Part Name for your 1985 Subaru DL
Image
Product
Price
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1006
- 39.61
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 38.99
- 990
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1985 - Subaru DL | H | 1781 | Water Pump, Air Conditioning and Power Steering | GAS | 4 Cyl 1.8L | - |
- W/O A.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1006
- 39.61
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 38.99
- 990
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
000067015321, 0059976892, 0070077, 0110037, 0116100, 016864, 0197810984, 0200085, 02032188, 027070553, 027100190, 027100190Y, 028410, 031104972, 035260849C, 0401393, 055260849C, 060518381...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1985 - Subaru DL | H | 1781 | Water Pump, Alternator and Power Steering | GAS | 4 Cyl 1.8L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 124
- 4.9
- End 1 Inside Diameter:
- .61
- 15
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- .61
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0491210631, 1, 10042686, 1010, 10120087, 122310, 12604942, 1333180, 1370436, 14-1725-8, 142-0801, 142-5941, 14207S, 1489658, 15115123, 15612108, 15665113, 15727639...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Subaru DL | H | 1781 | GAS | 4 Cyl 1.8L | - |
- PWM Fan Controller, Flush surface mount sending unit.
- PWM Fan Controller, Flush surface mount sending unit.
- Best Electric Fan Control
- Product Attributes:
- Amp Rating: 70 Amp
-
Features:
- PWM Fan Controller, Flush surface mount sending unit.
- the electric fans often only run between 40-60% to keep your engine cool. Additional benefits include, reduced fan speeds which means reduced fan noise, which tends to compete with that sweet sound of your engine! This multi-fan controller has a built-in A/C Over-ride circuit and is designed to control as many 12 volt brushed electric fans as desired, up to 70 Amps combined. Even better, installation and calibration is a snap. It simply wires in-between your vehicles battery and electric fans.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Subaru DL | H | 1781 | 4 Cyl 1.8L | - |
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- 2 Required
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- Better Control
- Product Attributes:
- Amp Rating: 35 Amp Per Fan
-
Features:
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8" NPT thread-in probe.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Subaru DL | H | 1781 | 4 Cyl 1.8L | - |
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- 2 Required
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Switching activation: Ground
-
Features:
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8" NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Subaru DL | H | 1781 | 4 Cyl 1.8L | - |
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Push In Sensor Probe
- Product Attributes:
- Max Amp Draw: 25
-
Features:
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- This 180°F-on/165°F-off electric fan control kit is designed to activate up to 2 fans with a maximum draw of 25 amps. Includes a push-in radiator fin probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Subaru DL | H | 1781 | 4 Cyl 1.8L | - |
- Adjustable Electric Fan Controller, Push In Radiator Probe
- 2 Required
- Adjustable Electric Fan Controller, Push In Radiator Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Trigger: Ground Circuit
-
Features:
- Adjustable Electric Fan Controller, Push In Radiator Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a push-in radiator probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Subaru DL | H | 1781 | 4 Cyl 1.8L | - |
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- Adapter o-ring size: 2-3/4
- Cooler height: 7-5/8
- Cooler mounting: 13-7/8
- Cooler inlet dim: 6-1/4
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum Tube & Fin
- Adapter thickness: 1-3/4
-
Features:
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- Perfect for stock to mild street use, this universal 6 pass high capacity copper tube/aluminum fin engine oil cooler kit can not only reduce oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Subaru DL | H | 1781 | 4 Cyl 1.8L | - |
- Relief pressure 13 lb
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10227, 10227ST, 12R6, 1678-20166, 17137, 19317447, 214307999C, 21430F430A, 2533005000, 52467188, 7513, 7513-RC, 94842508, 94847233, 94854943, 96051840, 96051843, 96060164...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Subaru DL | H | 1781 | 4 Cyl 1.8L | - |
Showing 1 - 10 of 55 products
Loading...