1985 Toyota Cressida Belts and Cooling Parts
Choose your Part Name for your 1985 Toyota Cressida
Image
Product
Price
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1006
- 39.61
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 38.99
- 990
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
000067015321, 0059976892, 0070077, 0110037, 0116100, 016864, 0197810984, 0200085, 02032188, 027070553, 027100190, 027100190Y, 028410, 031104972, 035260849C, 0401393, 055260849C, 060518381...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1985 - Toyota Cressida | L | 2754 | Air Conditioning | GAS | 6 Cyl 2.8L | - |
- PWM Fan Controller, Flush surface mount sending unit.
- PWM Fan Controller, Flush surface mount sending unit.
- Best Electric Fan Control
- Product Attributes:
- Amp Rating: 70 Amp
-
Features:
- PWM Fan Controller, Flush surface mount sending unit.
- the electric fans often only run between 40-60% to keep your engine cool. Additional benefits include, reduced fan speeds which means reduced fan noise, which tends to compete with that sweet sound of your engine! This multi-fan controller has a built-in A/C Over-ride circuit and is designed to control as many 12 volt brushed electric fans as desired, up to 70 Amps combined. Even better, installation and calibration is a snap. It simply wires in-between your vehicles battery and electric fans.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | - |
- Adjustable Electric Fan Controller, Push In Radiator Probe
- 2 Required
- Adjustable Electric Fan Controller, Push In Radiator Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Trigger: Ground Circuit
-
Features:
- Adjustable Electric Fan Controller, Push In Radiator Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a push-in radiator probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | - |
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- 2 Required
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- Better Control
- Product Attributes:
- Amp Rating: 35 Amp Per Fan
-
Features:
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8" NPT thread-in probe.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | - |
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Push In Sensor Probe
- Product Attributes:
- Max Amp Draw: 25
-
Features:
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- This 180°F-on/165°F-off electric fan control kit is designed to activate up to 2 fans with a maximum draw of 25 amps. Includes a push-in radiator fin probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | - |
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- 2 Required
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Switching activation: Ground
-
Features:
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8" NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | - |
- Toyota Supra Racing Thermostat, 1986-1992
- Racing Thermostat, fits Toyota Supra 1986-1992
- Product Attributes:
- SellingPoint04: Mishimoto Lifetime Warranty
- SellingPoint05: N/a
- SellingPoint06: N/a
- SellingPoint07: N/a
- SellingPoint01: Fits The 1986-1992 Toyota Supra
- SellingPoint02: Activates At Lower Temperature So Coolant Flows Through System Earlier
- SellingPoint03: Allows For Cooler Engine Temperatures
- TechSpec Chassis Codes: Mark Iii--a20--a35--a30--a50--a60
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec OEM Activation Temperature (F): 194
- SellingPoint10: N/a
- TechSpec Note: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: 8rc--3rc--18rc--20r--22r--22re--22rec--22rtec--3vze--7mge--7mgte
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Applications: 1985-1995 Toyota 4runner--1973-1985 Toyota Celica--1974-1985 Toyota Corolla--1967-1982 Toyota Corona--1978-1992 Toyota Cressida--1973-1995 Toyota Pick Up
- TechSpec Includes: (1) Mishimoto Thermostat--mishimoto Lifetime Warranty
- TechSpec Mishimoto Activation Temperature (F): 154.4
- The Mishimoto racing thermostat for the 1986-1992 Toyota Supra will promote greater cooling efficiency throughout your engine.The Mishimoto racing thermostat will significantly lower high engine temperature produced by modified and upgraded turbo applications.Once the engine is fully warmed up, the Mishimoto racing thermostat will open up at a lower temperature than standard thermostats.Opening at a lower temperature allows the coolant to flow through the engine sooner thus reducing and maintaining cooler engine temperatures.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 1985 - Toyota Cressida | United States |
- Toyota Supra Racing Thermostat, 1986-1992
- Racing Thermostat, fits Toyota Supra 1986-1992
- Product Attributes:
- SellingPoint04: Mishimoto Lifetime Warranty
- SellingPoint15: N/a
- SellingPoint05: N/a
- SellingPoint06: N/a
- SellingPoint07: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint01: Fits The 1986-1992 Toyota Supra
- SellingPoint12: N/a
- TechSpec Engine Codes: 8rc--3rc--18rc--20r--22r--22re--22rec--22rtec--3vze--7mge--7mgte
- SellingPoint02: Activates At Lower Temperature So Coolant Flows Through System Earlier
- SellingPoint13: N/a
- SellingPoint03: Allows For Cooler Engine Temperatures
- SellingPoint14: N/a
- TechSpec Chassis Codes: Mark Iii--a20--a35--a30--a50--a60
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Applications: 1985-1995 Toyota 4runner--1973-1985 Toyota Celica--1974-1985 Toyota Corolla--1967-1982 Toyota Corona--1978-1992 Toyota Cressida--1973-1995 Toyota Pick Up
- TechSpec Includes: (1) Mishimoto Thermostat--mishimoto Lifetime Warranty
- TechSpec OEM Activation Temperature (F): 194
- SellingPoint10: N/a
- TechSpec Mishimoto Activation Temperature (F): 154.4
- TechSpec Note: N/a
- The Mishimoto racing thermostat for the 1986-1992 Toyota Supra will promote greater cooling efficiency throughout your engine.The Mishimoto racing thermostat will significantly lower high engine temperature produced by modified and upgraded turbo applications.Once the engine is fully warmed up, the Mishimoto racing thermostat will open up at a lower temperature than standard thermostats.Opening at a lower temperature allows the coolant to flow through the engine sooner thus reducing and maintaining cooler engine temperatures.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1985 - Toyota Cressida | Luxury |
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- BTU: 21000
- Adapter o-ring size: 2-3/4, 3-1/2
- Cooler height: 8-7/16
- Cooler inlet dim: 8-1/2
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum
- Adapter thickness: 1-3/4, 2-1/8
-
Features:
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- A step up from the popular tube and fin design this aluminum plate and fin-based oil cooler kit not only reduces oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures in the radiator and cooling system. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles on the road today.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | - |
- 180 Degrees F OE Specified Temperature ; "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating."
- Fail-Safe
This Part Fits the Following OEM/Substitute Numbers:
1601-18241, 7240-180, 74080, 97240180, NI, P7240-180, SS180-0427
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | - |
Showing 1 - 10 of 41 products
Loading...