1987 BMW 735i Belts and Cooling Parts
Choose your Part Name for your 1987 BMW 735i
Accessory Drive Belt
Automatic Transmission Oil Cooler Hose Seal
Automatic Transmission Oil Cooler Kit
Engine Auxiliary Water Pump Valve Vibration Damper
Engine Coolant Hose
Engine Coolant Level Sensor
Engine Coolant Reservoir Cap
Engine Coolant Reservoir Hose
Engine Coolant Temperature Sender
Engine Coolant Temperature Sensor
Engine Coolant Thermostat
Engine Coolant Thermostat Housing Cap
Engine Coolant Thermostat Housing Gasket
Engine Coolant Thermostat Seal
Engine Cooling Fan
Engine Cooling Fan Blade
Engine Cooling Fan Clutch
Engine Cooling Fan Controller
Engine Cooling Fan Resistor
Engine Cooling Fan Switch
Engine Oil Cooler Seal
Engine Water Pump
Engine Water Pump Gasket
Hose Clamp
Radiator Coolant Hose
Radiator Mount
Radiator Mount Bracket
Image
Product
Price
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 36.57
- 928.88
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length: 914.40
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
02117-90013, 02117-90513, 1.711.144, 111-903-137E, 11720-22101, 11720-73402, 11720-N8502, 11720-N9500, 11720-W7010, 11A0915, 13360, 13361, 14030085, 141-0679, 141-1205, 141-1300, 14853-C610101, 15-360...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1987 - BMW 735i | Power Steering |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 36.83
- 935
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length: 914
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
00015613365, 0009977592, 0019973792, 0023223156, 0039972592, 0069970292, 0079971492, 0119759, 027024468, 03-02-488-1, 050121039A, 068121039P, 0950914, 10-01544, 1013905M1, 10358, 10360, 10430744780...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - BMW 735i | L | 3430 | Power Steering | GAS | 6 Cyl 3.5L | - |
- 13 Row Series 9000 Plate & Fin Transmission Cooler Kit, 1/2" NPT
- 13 Row Cooler
- 13 Row Series 9000 Plate & Fin Transmission Cooler Kit, 1/2" NPT
- 9000 Series Plate and Fin Transmission Cooler Kit
- Product Attributes:
- BTU: 21000
- Inlet dim: 8-1/2
- GVW: 22000
- Mounting: 6-11/16 X 7-5/8
- Depth: 1-1/4
-
Features:
- 13 Row Series 9000 Plate & Fin Transmission Cooler Kit, 1/2" NPT
- Very popular with original equipment manufacturers for use on their towing applications, our Plate and Fin coolers is no exception, featuring strong furnace-brazed construction, 1 1/4" wide plates and embossed turbulators which maximize heat transfer while also minimizing pressure drop. This unit is perfect for light to medium duty use and occasional towing. It greatly extends transmission life by preventing heat-related transmission failures, and improve shifting performance. Built with 1/2" NPT female cooler ports and includes 1/2" NPT x 3/8" hose barb adapters. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - BMW 735i | L | 3430 | Automatic | United States | 6 Cyl 3.5L | - |
- PWM Fan Controller, Flush surface mount sending unit.
- PWM Fan Controller, Flush surface mount sending unit.
- Best Electric Fan Control
- Product Attributes:
- Amp Rating: 70 Amp
-
Features:
- PWM Fan Controller, Flush surface mount sending unit.
- the electric fans often only run between 40-60% to keep your engine cool. Additional benefits include, reduced fan speeds which means reduced fan noise, which tends to compete with that sweet sound of your engine! This multi-fan controller has a built-in A/C Over-ride circuit and is designed to control as many 12 volt brushed electric fans as desired, up to 70 Amps combined. Even better, installation and calibration is a snap. It simply wires in-between your vehicles battery and electric fans.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - BMW 735i | L | 3430 | 6 Cyl 3.5L | - |
- Adjustable Electric Fan Controller, Push In Radiator Probe
- 2 Required
- Adjustable Electric Fan Controller, Push In Radiator Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Trigger: Ground Circuit
-
Features:
- Adjustable Electric Fan Controller, Push In Radiator Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a push-in radiator probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - BMW 735i | L | 3430 | 6 Cyl 3.5L | - |
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- 2 Required
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- Better Control
- Product Attributes:
- Amp Rating: 35 Amp Per Fan
-
Features:
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8" NPT thread-in probe.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - BMW 735i | L | 3430 | 6 Cyl 3.5L | - |
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Push In Sensor Probe
- Product Attributes:
- Max Amp Draw: 25
-
Features:
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- This 180°F-on/165°F-off electric fan control kit is designed to activate up to 2 fans with a maximum draw of 25 amps. Includes a push-in radiator fin probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - BMW 735i | L | 3430 | 6 Cyl 3.5L | - |
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- 2 Required
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Switching activation: Ground
-
Features:
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8" NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - BMW 735i | L | 3430 | 6 Cyl 3.5L | - |
- Flexible Coolant Hose (Heavy-Duty)
- Product Attributes:
- Molded: No
- Centerline Length:
- 16.5
- 419
- End 1 Inside Diameter:
- 1.75
- 44
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.75
- 44
-
Features:
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
- EPDM tube and Neoprene cover for extended service life
- Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
- Resistant to heat, oil and ozone
- Performs to SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Green Stripe Vulco-Flex hose can replace a multitude of molded hose sizes and shapes on a range of trucks, buses and heavy-duty vehicles. Together with Gates straight and curved radiator hoses, this flexible quality hose allows optimum market coverage. Flexible coolant hose with built-in spiral wire is a permanent replacement hose equaling the performance of molded hose.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10-19231, 100434, 1022, 11531265271, 124461, 128, 129417, 1316, 1316HD, 1407243, 1615833, 1616352, 1670366, 1713956, 1719647, 1736083, 1778186, 1801645...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1987 - BMW 735i | L | 3430 | Upper | GAS | 6 Cyl 3.5L | - |
- Clutch Fan Blade - Plastic
- Product Attributes:
- Hub Depth: 45
- Rotation:
- Counterclockwise (left)
- Rotar En El Sentido Contrario A Las Agujas Del Reloj (izquierda)
- Blade Quantity: 11
- Flexible Blades:
- No
- Non
- Mounting Hardware Included:
- No
- Non
- Bolt Circle Diameter: 150 Mm
- Blade Color:
- Black
- Negro
- Noir
- Maximum RPM: 3500
- Hub Material:
- Acero
- Steel
- Blade Thickness: 2.5
- Airflow Type:
- Extractor
- Puller
- Contenidos del paquete: 1 Ensamble De Ventilador Del Embrague
- Cable Material:
- Plastic
- Plástico
- Blade Type:
- Alabe De Alineación Hacia Adelante
- Forward Align Fin
-
Features:
- Direct replacement - this engine cooling fan blade fits and functions like the original equipment fan blade
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
- Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.
This Part Fits the Following OEM/Substitute Numbers:
11521712058
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1987 - BMW 735i | L | 3430 | 6 Cyl 3.5L | - |
Showing 1 - 10 of 75 products
Loading...