1991 Oldsmobile Cutlass Cruiser Belts and Cooling Parts
Choose your Part Name for your 1991 Oldsmobile Cutlass Cruiser
Accessory Drive Belt
Automatic Transmission Oil Cooler Kit
Engine Coolant Bypass Hose
Engine Coolant Outlet Gasket
Engine Coolant Outlet O-Ring
Engine Coolant Reservoir Cap
Engine Coolant Temperature Sensor
Engine Coolant Thermostat
Engine Coolant Thermostat Gasket
Engine Coolant Thermostat Housing Gasket
Engine Coolant Thermostat Seal
Engine Cooling Fan Motor
Engine Cooling Fan Shroud Bolt
Engine Oil Cooler Kit
Engine Water Pump
Engine Water Pump Gasket
Radiator Cap
Radiator Support Baffle Clip
Serpentine Belt
Image
Product
Price
- 2 Pole Radiator Fan Motor
- Radiator Fan Motor
- 2 Pole Radiator Fan Motor
- Fan Motor
- Product Attributes:
- Performance Rated?: Yes
- Bolt Quantity: Multi Hole
- Connector Gender: Female
- Voltage: 12 Volt
- Connector Shape: Square
- Shroud?: No
- Description: 2 Pole Radiator Fan Motor
- Color: Black
- Motor Type: 2 Pole
- Connector Qty: 1
- Terminal Pin Qty.: 2
- Terminal Gender: Male
- O.E. Replacement?: Yes
- Type: Motor Only
-
Features:
- Motor RPM equivalent to or exceeds OEM motor
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
02526, 02539, 02551, 10074158, 10427857, 11135656V, 126517, 130062, 130131, 158197, 158262, 158299, 158302, 158307, 158460, 158461, 158465, 158498...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Oldsmobile Cutlass Cruiser |
- Cut to Fit
- Curved Radiator Hose
- Product Attributes:
- : .63
- Trunk Height: 3 1/4
- Color: Black
- Contains Heat Shield: N
- Centerline Length: 3.25
- End 1 Inside Diameter:
- .63
- 5/8
- Hose Type: Single I.d. Hose
- SAE Specification: Sae J20r4 Class D-1, Sae J1684 Type Ec
- Contains Protective Sleeve: N
- Material: Epdm
- End 2 Inside Diameter: 5/8
This Part Fits the Following OEM/Substitute Numbers:
10042686, 10087632, 10160, 14100667, 142-0801, 142-5941, 142-5962, 14207S, 14605S, 15708634, 15708636, 16261-63010, 16261-64070, 16261-88360, 16261-88361, 16261-88380, 16283-42010, 169192-R1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Oldsmobile Cutlass Cruiser | V | - | 6 Cyl 3.3L | 204 |
- 180 Degrees F Alternate Temperature Option
- Standard
This Part Fits the Following OEM/Substitute Numbers:
115, 12572787, 12T4D, 13848, 15728, 15848, 1601-24040, 203-180, 20380, 24575984, 24576634, 33428, 35848, 3848, 9203180, 96051826, P3848, QRT42...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Oldsmobile Cutlass Cruiser | L | 2474 | 4 Cyl 2.5L | 151 |
- 195 Degrees F OE Specified Temperature
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10207375, 12T4E, 131-115, 131-122, 13849, 15849, 1601-24117, 203-195, 20395, 215, 24506986, 24577299, 33429, 34007, 34019, 34024, 35849, 3849...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Oldsmobile Cutlass Cruiser | L | 2474 | 4 Cyl 2.5L | 151 |
- Engine Coolant Thermostat Housing Gasket
- 1.560 (in) Inside Diameter
- FEL-PRO 35666 Engine Coolant Thermostat Housing Gasket for Buick LeSabre
- Product Attributes:
- Inside Diameter:
- 1.560
- 39.6
- Grade Type: Premium
- Mounting Hole Quantity: 0
- Inside Diameter:
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
112161, 113801, 24506985, 25535126, 711354900, C31227, C31979, WO8348, WO8636
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Oldsmobile Cutlass Cruiser | V | - | 6 Cyl 3.3L | 204 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 124
- 4.9
- End 1 Inside Diameter:
- .61
- 15
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- .61
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0491210631, 1, 10042686, 1010, 10120087, 122310, 12604942, 1333180, 1370436, 14-1725-8, 142-0801, 142-5941, 14207S, 1489658, 15115123, 15612108, 15665113, 15727639...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1991 - Oldsmobile Cutlass Cruiser | V | - | GAS | 6 Cyl 3.3L | 204 |
- 4 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit
- 16 5/8" x 5 1/8" x 3/4"
- 4 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit
- 7000 Series 4 Pass 11/32" Hose Barb Kit
- Product Attributes:
- Inlet dim: 3-3/4
- GVW: 14000
- Mounting: 13-3/4
- Depth: 3/4
-
Features:
- 4 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit
- This Tube & Fin transmission cooler features 1/2" copper tubing expanded into aluminum cooling fins and include embossed turbulators which serve to agitate fluid for maximum heat transfer. Perfect for today's highly-stressed compact cars and SUVs', they improve shifting performance and extend the life of the transmission by eliminating heat-related transmission failures. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1991 - Oldsmobile Cutlass Cruiser | L | 2474 | Automatic | United States | 4 Cyl 2.5L | 151 |
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- BTU: 21000
- Adapter o-ring size: 2-3/4, 3-1/2
- Cooler height: 8-7/16
- Cooler inlet dim: 8-1/2
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum
- Adapter thickness: 1-3/4, 2-1/8
-
Features:
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- A step up from the popular tube and fin design this aluminum plate and fin-based oil cooler kit not only reduces oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures in the radiator and cooling system. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles on the road today.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Oldsmobile Cutlass Cruiser | V | - | 6 Cyl 3.3L | 204 |
- 195 Degrees F OE Specified Temperature ; "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating."
- Fail-Safe
This Part Fits the Following OEM/Substitute Numbers:
1601-290991, 70395, 7203-192, 7203-195, 97203195, NI, P7203-192, SS195-3027
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1991 - Oldsmobile Cutlass Cruiser | L | 2474 | 4 Cyl 2.5L | 151 |
- Metal Clip Nut No.8
- Air Deflector Package Quantity: 3 Packaging Type: Clamshell
- Product Attributes:
- Thread Direction:
- Clockwise
- En Sentido Horario
- Integral Washer:
- No
- Non
- Heat Hardened:
- No
- Non
- Zinc Coated:
- No
- Non
- Finish:
- Aucun
- Ninguna
- None
- Inside Diameter: 0.125
- Shape: Rectangular
- Arandela integral: No
- Diseño de extremo abierto: Sí
- ACQ Rated:
- No
- Non
- Color:
- Black
- Negro
- Noir
- Métrico o SAE: Sae
- Grade:
- Reemplazo Estándar
- Standard
- Contenidos del paquete: 3 Tuercas Broche
- Open End Design:
- Oui
- Yes
- Metric Or SAE: Sae
- Type:
- Tipo U
- U-type
- Material:
- Acero
- Steel
- Thread Direction:
-
Features:
- Constructed of high-quality materials for long-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
- Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
This Part Fits the Following OEM/Substitute Numbers:
15650655, 381818S2, 454060, 9424837, 9431530
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1991 - Oldsmobile Cutlass Cruiser | Lower |
Showing 1 - 10 of 41 products
Loading...