1992 Honda Prelude Belts and Cooling Parts
Choose your Part Name for your 1992 Honda Prelude
Accessory Drive Belt
Engine Coolant Outlet Gasket
Engine Coolant Pipe O-Ring
Engine Coolant Temperature Sender
Engine Coolant Temperature Sensor
Engine Coolant Thermostat
Engine Coolant Thermostat Gasket
Engine Coolant Thermostat Housing Cap
Engine Cooling Fan
Engine Cooling Fan Blade
Engine Cooling Fan Controller
Engine Cooling Fan Motor
Engine Cooling Fan Shroud Bolt
Engine Cooling Fan Switch
Engine Cooling Fan Switch Seal
Engine Oil Cooler Gasket
Engine Oil Cooler Seal
Engine Water Pump
Engine Water Pump Gasket
Radiator
Radiator Cap
Radiator Coolant Hose
Radiator Drain Plug
Radiator Drain Plug Gasket
Serpentine Belt
Image
Product
Price
- w/o A.C.
- Product Attributes:
- Cross Section: K-section
- Top Width: .68
- Rib Profile: Straight Rib
- Outside Circumference:
- 37.67
- 956.82
- Rib Depth: Standard
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 37.01
- 940.06
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 5
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
1340A005, 141-1353, 146-050945, 19230-PHM-004, 206996, 25-050370, 25-70936, 31110-P12-A020, 31110-PD6-0030, 31110-PY3-0030, 31110P12A020M2, 370K5, 4050370, 42453, 5K370, 5PK940, 6703, 99365-50940...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1992 - Honda Prelude | L | 2259 | Alternator | 4 Cyl 2.3L | - |
- Radiator cap
- Relief pressure 16 lb with Toyo radiator
- Standard
- Product Attributes:
- Cap Depth: 0.97
- Lever Type:
- No
- Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10233, 10233ST, 12R8, 1350A730, 1640162090, 1678-29300, 17167, 1793282Z00, 214301P111, 253301P000, 253303K000, 253303Z000, 253304H000, 4495805, 45137AE003, 45137AE00B, 45137AE01A, 7516...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Honda Prelude | L | 2156 | 4 Cyl 2.2L | - |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1992 - Honda Prelude | S |
- 12in. Tornado Electric Puller Fan; Standard Mounting Kit
- 880 CFM; 12 in. Fan Size; 12-3/8 in. Width; 11-1/4 in. x 5-1/4 in. Mounting; 11-13/16 in. Height; 1-1/4 in. Depth; 8.8 Amp Draw
- 12in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 880 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- This 12 in. reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Honda Prelude |
- 12in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 21/15 Amp Draw High/Low; 12-3/4 in. Width; 12-3/4 in. Height; 2-5/8 in. Depth; 8-1/4 in. x 11-5/8 in. Mounting; Single
- 12in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Steel Fan Blades
- Maximum Full-Time Airflow
- Black Powder Coated Finish
- 20 in. Reverse Rotation Design
- Rated Up To 8.000 Revolutions Per Minute
- Our most compact version in our High Output Single RAD fan series, this 12 in. fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 1450 CFM while drawing up to 21 amps.
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Honda Prelude |
- Radiator cap
- Relief pressure 16 lb w/Nippondenso Radiator
- Standard
- Product Attributes:
- Valve OD: 1.30 In
- Cap Depth: 0.85
- Lever Type:
- No
- Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10242, 10242ST, 12R19, 1640131520, 1640131650, 1640131792, 1640131830, 1640136020, 1640137520, 1640146610, 1640150370, 1640175440, 1650221060, 1650221080, 1678-20126, 17037, 19045PWA004, 19045RAA003...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Honda Prelude | L | 2156 | 4 Cyl 2.2L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 78°C/172°F - OE Temp - The rubber thermostat gasket is serviced separately.
- (78°C/172°F)
- OE Temp - 78°C/172°F
Additional Fitment Information:
| Vehicle |
|---|
| 1992 - Honda Prelude |
- Thermostat Gasket
- Type: Thermostat Gasket Use: Thermostat Housing Thermostat O-ring
- FEL-PRO 35480 Thermostat Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
0390123, 112191, 19305-PT0-000, 33615, 7714959, C31051, C31157, WO8359
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Honda Prelude | L | 2156 | 4 Cyl 2.2L | - |
- Thermostat-170 Degrees
- Temperature 170F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.41 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T75C, 15187, 1601-24096, 170-823, 19300P08003, 19300PH7014, 19300PR3004, 19300PT0003, 19300PT0004, 19301P08000, 19301P08305, 19301P08315, 19301P08316, 19301P10307, 19301PAA305, 19301PAA306, 19301PLC315, 3187...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Honda Prelude | L | 2156 | 4 Cyl 2.2L | - |
- Fail-Safe Thermostat-170 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 170F OEM Recommended Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.41 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
7328-170, 73287, 97328170, NI, P7328-170, SS170-8237
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1992 - Honda Prelude | L | 2156 | 4 Cyl 2.2L | - |
Showing 1 - 10 of 79 products
Loading...