1996 Geo Tracker Belts and Cooling Parts
Choose your Part Name for your 1996 Geo Tracker
Accessory Drive Belt
Automatic Transmission Oil Cooler Kit
Engine Coolant Bypass Hose
Engine Coolant Outlet Gasket
Engine Coolant Temperature Sender
Engine Coolant Temperature Sensor
Engine Coolant Thermostat
Engine Coolant Thermostat Gasket
Engine Oil Cooler Kit
Engine Water Pump Gasket
Engine Water Pump Housing Gasket
Radiator Cap
Radiator Coolant Hose
Radiator Drain Plug
Serpentine Belt
Image
Product
Price
This Part Fits the Following OEM/Substitute Numbers:
11720-53Y00, 11720-53Y20, 11720-Q5600, 146-040800, 17521-61A00, 17521-61A10, 17521-61A20, 25-040315, 25-74031, 30005359, 31110-P2A-003, 31110-P2A-004, 315K4, 4040315, 4K315, 4PK800, 4PK805, 8-94382-107-1...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1996 - Geo Tracker | Fan and Alternator |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 37.96
- 964
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 37.38
- 949
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
005435171, 1040372, 1040375, 1192004U00, 1192006P01, 1192060U00, 1192060U01, 11920AG900, 1195004U00, 1195059S02, 11950AR000, 11950AR00A, 128026, 128028, 14-0805-4, 141-1354, 141-1492, 146-040940...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Geo Tracker | L | 1588 | Air Conditioning and Power Steering | GAS | 4 Cyl 1.6L | 98 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 33.625
- 854
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 33.13
- 842
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0111017, 038260849, 038260849A, 1040330, 11282245850, 117204A0A1, 1172053J20, 1192077A20, 11920Q5200TT, 11920Q5200UU, 11920Q5200UW, 11920V7300, 11920V7310, 1195035F00, 119504Z800, 119505M001, 141-1393, 146-040840...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Steering System | CID |
|---|---|---|---|---|---|---|---|
| 1996 - Geo Tracker | L | 1588 | Air Conditioning | GAS | 4 Cyl 1.6L | Manual | 98 |
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 32.25
- 818
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 31.65
- 804
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
0019930796, 0019934496, 1040315, 11287570266, 11287631825, 117202F000, 117202F005, 1172053Y00, 1172053Y01, 1172053Y10, 1172053Y20, 1172088R10, 11720D4006, 11720D4016, 11720F4200, 14-0668-0, 141-1415, 141-1421...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Geo Tracker | L | 1588 | Fan and Alternator | GAS | 4 Cyl 1.6L | 98 |
- W/O A.C.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 32.75
- 831
- Grade Type: Oe Performance
- Cross Section Designation: K
- Effective Length:
- 32.16
- 817
- Rib Quantity: 4
- Type: Automotive V-ribbed Belt (standard)
- Cord Material: Polyester
- Material: Epdm
- Top Width:
-
Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision-fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
This Part Fits the Following OEM/Substitute Numbers:
009500M200, 1040320, 1172005201, 1172052Q00, 1172053Y20TT, 1172053Y20UU, 1172053Y20UW, 1172071J00, 11720D4007, 11720D4017, 11720Q5201, 11720Q5201TT, 11720Q5201UU, 11720Q5201UW, 11720Q5600, 11720V5301, 1192001B00, 1192001B10...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Geo Tracker | L | 1588 | Power Steering | GAS | 4 Cyl 1.6L | 98 |
- Optional Hose; Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 11.3
- 287
- End 1 Inside Diameter:
- 1.06
- 27
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.06
- 27
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Geo Tracker | L | 1588 | Upper | GAS | 4 Cyl 1.6L | 98 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 11.3
- 287
- End 1 Inside Diameter:
- 1.06
- 27
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.06
- 27
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
14-1880-6, 142-6043, 142-6045, 142-6133, 1657111040, 1657111071, 1657111110, 1657111210, 1785156B00, 1785160B00, 1785463B00, 1785463B10, 1785463E00, 1785563B20, 1785563B2D, 19501P08000, 20157S, 2099...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Geo Tracker | L | 1588 | Lower - Pipe To Radiator | GAS | 4 Cyl 1.6L | 98 |
- W/O Calif. Emission System; Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter:
- .25
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .25
- 6
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K24715281D, 10010, 1319171C50, 1319172C50, 14000S, 1405453F11, 15802763, 1626111060, 1626764010, 1734376010, 18010, 19130290, 19130424, 19524P5A000, 19528P3FA50, 22633443, 22717008, 22733960...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Geo Tracker | L | 1588 | GAS | 4 Cyl 1.6L | 98 |
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- Adapter o-ring size: 2-3/4
- Cooler height: 7-5/8
- Cooler mounting: 13-7/8
- Cooler inlet dim: 6-1/4
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum Tube & Fin
- Adapter thickness: 1-3/4
-
Features:
- 6 Pass Series 7000 Alum/Copper Universal Engine Oil Cooler Kit Sandwich Adapter
- Perfect for stock to mild street use, this universal 6 pass high capacity copper tube/aluminum fin engine oil cooler kit can not only reduce oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Geo Tracker | L | 1588 | 4 Cyl 1.6L | 98 |
- 10 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit, Truck/RV
- 16 5/8" x 12 5/8" x 3/4"
- 10 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit, Truck/RV
- 7000 Series 10 Pass 11/32" Hose Barb Kit
- Product Attributes:
- Inlet dim: 11-1/4
- GVW: 22500
- Mounting: 13-3/4
- Depth: 3/4
-
Features:
- 10 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit, Truck/RV
- This Tube & Fin transmission cooler features 1/2" copper tubing expanded into aluminum cooling fins and include embossed turbulators which serve to agitate fluid for maximum heat transfer. Perfect for full-size trucks and RV's used often for towing and hauling, they improve shifting performance and extend the life of the transmission by eliminating heat-related transmission failures. 11/32" hose barb inlets and complete hardware kit included.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1996 - Geo Tracker | L | 1588 | Automatic | United States | 4 Cyl 1.6L | 98 |
Showing 1 - 10 of 52 products
Loading...