1998 Acura Integra Belts and Cooling Parts
Choose your Part Name for your 1998 Acura Integra
Accessory Drive Belt
Accessory Drive Belt Idler Pulley
Accessory Drive Belt Tensioner Pulley
Engine Coolant Bypass Hose
Engine Coolant Hose
Engine Coolant Pipe
Engine Coolant Pipe O-Ring
Engine Coolant Reservoir
Engine Coolant Reservoir Cap
Engine Coolant Reservoir Hose Connector
Engine Coolant Temperature Sender
Engine Coolant Temperature Sensor
Engine Coolant Thermostat
Engine Coolant Thermostat Gasket
Engine Coolant Thermostat Housing Cap
Engine Cooling Fan
Engine Cooling Fan Blade
Engine Cooling Fan Controller
Engine Cooling Fan Shroud Bolt
Engine Cooling Fan Switch
Engine Oil Cooler Gasket
Engine Oil Cooler Seal
Engine Water Pump
Engine Water Pump Gasket
Radiator
Radiator Cap
Radiator Coolant Hose
Radiator Drain Plug
Radiator Drain Plug Gasket
Serpentine Belt
Image
Product
Price
- Product Attributes:
- Cross Section: K-section
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference:
- 31.17
- 791.72
- Rib Depth: Deep
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 30.51
- 774.96
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
11720-26E02, 11720-26E12, 11950 31U01, 11950-31000, 11950-31U00, 11950-31U02, 11950-8J100, 11950-8J110, 146-040770, 146-040775, 146-040780, 25-040305, 25-74030, 305K4, 31110-P01-003, 31110-P01-0031, 31110-P01-004, 31110-P01-0041...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1998 - Acura Integra | L | 1797 | Alternator | 4 Cyl 1.8L | Type R | - |
- Product Attributes:
- Cross Section: K-section
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference:
- 34.91
- 886.72
- Rib Depth: Deep
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 34.25
- 869.95
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
11.28.7.546.164, 11.28.7.631.821, 25-040343, 25212-24320, 25212-24350, 342K4, 343K4, 38920-P08-0030, 38920-P75-A01, 38920-PM3-0031, 38920-PM5-A110, 4040342, 4612229, 4K343, 4PK870, 56992-P30-0040, 90082-93002, 99364-20870...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Acura Integra | L | 1834 | Air Conditioning and Idler | 4 Cyl 1.8L | - |
- Product Attributes:
- Cross Section: K-section
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference:
- 32.75
- 831.85
- Rib Depth: Standard
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 32.09
- 815.09
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
11720-D4007, 11720-D4017, 11720-Q5201, 11950-0M200, 11950-F4300, 141-1232, 146-040815, 17521-60A00, 17521-86500, 17521-86510, 25-040319, 25-040320, 25-70814, 30005514, 31-1E-28-4, 320K4, 38920-P73-003, 38920-P73-013...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1998 - Acura Integra | L | 1797 | Air Conditioning and Idler | 4 Cyl 1.8L | Type R | - |
- Small I.D. Heater Hose
- Product Attributes:
- Trunk Height: 7
- Contains Heat Shield: N
- End 1 Inside Diameter: 5/8
- Hose Type: Single I.d. Hose
- SAE Specification: Sae J20r3 Class D-1, Sae J1684 Type Ec
- Contains Protective Sleeve: N
- End 2 Inside Diameter: 5/8
This Part Fits the Following OEM/Substitute Numbers:
10096, 10701, 11042, 12590012, 14076S, 14161S, 14585S, 18096, 18701, 19042, 19506-PM6-000, 19508-P08-000, 19508-P2A-000, 19508-P2J-000, 19508-P2T-A00, 303618, 4383, 4519...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1998 - Acura Integra | L | 1797 | 4 Cyl 1.8L | Type R | - |
- K-Swap 92-00 Honda Civic / 94-01 Acura Integra All-Aluminum Radiator
- CSF manufactures the most advanced and efficient radiator in the industry for your K-Swapped Civic/Integra. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Core Material: Aluminum
- Title: K-swap 92-00 Honda Civic / 94-01 Acura Integra All-aluminum Radiator
-
Features:
- 2-Row 42mm Core (Dual Core) Featuring CSF's Exclusive B-Tube Technology
- Core Features an Ultra-Efficient Fin with 6.5mm Fin Height and Multi-Louvered Design for Maximum Surface Area Contact
- CNC Machined "Quick-Connect" Inlet/Outlet Connections
- CNC Machined Brackets and Fittings for Superb Fit and Durability
- All-Aluminum Race Style Drain Plug
- 1-Hour "Mirror Finish" Hand Polish
- Drop-in Fit
- CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your K-Swapped Civic/Integra running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.The CSF K-Swapped Civic/Integra radiator is a true "Drop-in fit" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Body | CID |
|---|---|---|---|---|---|---|
| 1998 - Acura Integra | L | 1797 | United States | 4 Cyl 1.8L | Sedan | - |
- Timing Belt Driven, Replace Timing Belt w/Pump
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Acura Integra | L | 1834 | 4 Cyl 1.8L | - |
- 12in. Tornado Electric Puller Fan; Standard Mounting Kit
- 880 CFM; 12 in. Fan Size; 12-3/8 in. Width; 11-1/4 in. x 5-1/4 in. Mounting; 11-13/16 in. Height; 1-1/4 in. Depth; 8.8 Amp Draw
- 12in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 880 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- This 12 in. reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Acura Integra |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Acura Integra |
- Adjustable Electric Fan Controller; 3/8in. NPT Thread In Probe
- Adjustable; w/3/8 in. NPT Thread In Probe; Maximum Draw Of 25 Amps
- Adjustable turn-on temperature from 150-240deg.F; Turn-off temperature is preset at 10deg.F below turn-on temperature; Thread in 3/8in. NPT probe; Heavy duty 40/60 amp relay maximum 25 amp continuous draw; AC override circuit included
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 150 To 240 Degrees Fahrenheit
- 10 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Thread in 3/8 in. NPT Temperature Sensor
- Heavy Duty 40/60 Amp Relay
- Includes AC Override Circuit
- Ground Circuit Relay
- Replacement 3/8 in. NPT Sensor Part Number 16750
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8 in. NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Acura Integra |
- Thermostat Gasket
- Type: Thermostat Gasket Use: Thermostat Housing Thermostat O-ring
- FEL-PRO 35480 Thermostat Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
0390123, 112191, 19305-PT0-000, 33615, 7714959, C31051, C31157, WO8359
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Acura Integra | L | 1797 | 4 Cyl 1.8L | - |
Showing 1 - 10 of 114 products
Loading...