1998 Audi A4 Belts and Cooling Parts
Choose your Part Name for your 1998 Audi A4
A/C Drive Belt Tensioner
Accessory Drive Belt
Accessory Drive Belt Tensioner
Automatic Transmission Oil Cooler Coolant Line Connector Seal
Automatic Transmission Oil Cooler Kit
Engine Auxiliary Water Pump
Engine Coolant Bypass Hose
Engine Coolant Hose
Engine Coolant Hose C-Clip Retainer
Engine Coolant Hose Flange Plug
Engine Coolant Hose Flange Retaining Spring
Engine Coolant Outlet Gasket
Engine Coolant Pipe
Engine Coolant Pipe O-Ring
Engine Coolant Reservoir
Engine Coolant Reservoir Cap
Engine Coolant Reservoir Hose
Engine Coolant Temperature Sender
Engine Coolant Temperature Sender O-Ring
Engine Coolant Temperature Sensor
Engine Coolant Temperature Sensor Clip
Engine Coolant Temperature Sensor O-Ring
Engine Coolant Thermostat
Engine Coolant Thermostat Housing
Engine Coolant Thermostat Housing O-Ring
Engine Coolant Thermostat Seal
Engine Coolant Water Outlet
Engine Cooling Fan
Engine Cooling Fan Clutch
Engine Cooling Fan Clutch Bearing
Engine Cooling Fan Clutch Pulley
Engine Cooling Fan Controller
Engine Cooling Fan Switch
Engine Cooling Fan Switch Seal
Engine Oil Cooler
Engine Oil Cooler Gasket
Engine Oil Cooler Kit
Engine Oil Cooler Seal
Engine Water Pump
Engine Water Pump Gasket
Hose Clamp
Intercooler
Intercooler Hose
Radiator
Radiator Coolant Hose
Radiator Coolant Hose Flange
Radiator Drain Plug
Radiator Drain Plug Gasket
Radiator Mount
Serpentine Belt
Image
Product
Price
- Product Attributes:
- Cross Section: K-section
- Rib Profile: Straight Rib
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 1295.40
- 51.00
- Rib Quantity: 5
- Maximum Operating Temperature:
- 100
- 212
- Top Width: .68
- Outside Circumference:
- 1312.17
- 51.66
- Color: Black
- Rib Depth: Standard
- Minimum Operating Temperature:
- -42.7
- -45
- Material: Epdm, Aramid Reinforced
This Part Fits the Following OEM/Substitute Numbers:
141-1339, 25-050510, 25-71294, 4050508, 4050510, 510K5, 5K510, 5PK1290, 5PK1295, 91950-12908, 91950-12980, 99365-01290, 99365-01300, 99365-51290, 99385-01300, AA91950-12908, K050510, MN187177...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Audi A4 | L | 1781 | Fan, Alternator, Power Steering and Tensioner | 4 Cyl 1.8L | - |
- Multi-Purpose O-Ring
- 50 (mm) Inside Diameter
- FEL-PRO 25598 Multi-Purpose O-Ring for Volkswagen Jetta
- Product Attributes:
- : O-ring
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
0374295, 059103095, 059121119, 0952009, 11140, 111401, 30715, 30928, 407636700, 417636700, 4200156, 471502, 5240692, 6028, 611464, 74-0096, 740096, 7459001...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Audi A4 | L | 1781 | 4 Cyl 1.8L | - |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 21.54
- 547
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 20.69
- 526
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
This Part Fits the Following OEM/Substitute Numbers:
058145271, 11X528, 15208, 25-7208, 3082747, 7208, AV11X528LA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Audi A4 | L | 1781 | Power Steering and Water Pump | GAS | 4 Cyl 1.8L | - |
- PWM Fan Controller, Flush surface mount sending unit.
- PWM Fan Controller, Flush surface mount sending unit.
- Best Electric Fan Control
- Product Attributes:
- Amp Rating: 70 Amp
-
Features:
- PWM Fan Controller, Flush surface mount sending unit.
- the electric fans often only run between 40-60% to keep your engine cool. Additional benefits include, reduced fan speeds which means reduced fan noise, which tends to compete with that sweet sound of your engine! This multi-fan controller has a built-in A/C Over-ride circuit and is designed to control as many 12 volt brushed electric fans as desired, up to 70 Amps combined. Even better, installation and calibration is a snap. It simply wires in-between your vehicles battery and electric fans.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Audi A4 | V | 2771 | 6 Cyl 2.8L | - |
- Adjustable Electric Fan Controller, Push In Radiator Probe
- 2 Required
- Adjustable Electric Fan Controller, Push In Radiator Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Trigger: Ground Circuit
-
Features:
- Adjustable Electric Fan Controller, Push In Radiator Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a push-in radiator probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Audi A4 | V | 2771 | 6 Cyl 2.8L | - |
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- 2 Required
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- Better Control
- Product Attributes:
- Amp Rating: 35 Amp Per Fan
-
Features:
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8" NPT thread-in probe.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Audi A4 | V | 2771 | 6 Cyl 2.8L | - |
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Push In Sensor Probe
- Product Attributes:
- Max Amp Draw: 25
-
Features:
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- This 180°F-on/165°F-off electric fan control kit is designed to activate up to 2 fans with a maximum draw of 25 amps. Includes a push-in radiator fin probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Audi A4 | V | 2771 | 6 Cyl 2.8L | - |
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- 2 Required
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Switching activation: Ground
-
Features:
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8" NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Audi A4 | V | 2771 | 6 Cyl 2.8L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 145
- 5.7
- End 1 Inside Diameter:
- .62
- 16
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- .62
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
078121096A, 12590013, 12590014, 12598524, 14-1700-6, 14229S, 21739, 55038831AG, 8430, BP-1739, BP1739, E6AE 8A527 AA, E6DZ 8A527 A, E8DE 8A527 AB, E9DE 8A527 AA, F0DZ 8A527 A, F10932, F1DE 8A527 AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Audi A4 | V | 2771 | GAS | 6 Cyl 2.8L | - |
- Product Attributes:
- Cross Section: K-section
- Rib Profile: Straight Rib
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 1880.11
- 74.02
- Rib Quantity: 6
- Maximum Operating Temperature:
- 100
- 212
- Top Width: .82
- Outside Circumference:
- 1896.88
- 74.68
- Color: Black
- Rib Depth: Standard
- Minimum Operating Temperature:
- -42.7
- -45
- Material: Epdm, Aramid Reinforced
This Part Fits the Following OEM/Substitute Numbers:
078.903.137BJ, 25-060739, 25-060739HD, 25519488, 25530594, 4060740, 4060741, 6PK1880, 6PK1882, 740K6, 90080-91136, 90080-91136-A, 90080-91136-B, 90080-91139, 90916-02547, 96 183 108, 96183108, 96417304...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1998 - Audi A4 | V | 2771 | Main Drive | 6 Cyl 2.8L | - |
Showing 1 - 10 of 139 products
Loading...