1998 Nissan Altima Belts and Cooling Parts
Choose your Part Name for your 1998 Nissan Altima
A/C Drive Belt Tensioner
Accessory Drive Belt
Accessory Drive Belt Idler Pulley
Accessory Drive Belt Tensioner Pulley
Automatic Transmission Oil Cooler Hose
Automatic Transmission Oil Cooler Hose Banjo Bolt O-Ring
Automatic Transmission Oil Cooler Kit
Engine Coolant Bypass Hose
Engine Coolant Reservoir
Engine Coolant Reservoir Cap
Engine Coolant Reservoir Hose
Engine Coolant Temperature Sender
Engine Coolant Temperature Sensor
Engine Coolant Thermostat
Engine Coolant Thermostat Housing
Engine Coolant Thermostat Housing Cap
Engine Cooling Fan
Engine Cooling Fan Controller
Engine Cooling Fan Motor
Engine Cooling Fan Motor Relay
Engine Oil Cooler Kit
Engine Water Pump
Radiator
Radiator Cap
Radiator Coolant Hose
Radiator Drain Plug
Radiator Drain Plug Gasket
Radiator Mount
Serpentine Belt
Image
Product
Price
- High Flow Thermostat-170 Degrees
- Temperature 170F Use Silicone Sealing OEM Recommended Temp
- High Flow
- Product Attributes:
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Bypass Length: 1.40 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12TP7C, 13967, 15397, 1601-24216, 2028-170, 212000C811, 2120040F00, 2120053J00, 2120053J10, 3, 33747, 33747S, 34011, 35967, 45967, 48447, 65287, 65967...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Nissan Altima | L | 2389 | 4 Cyl 2.4L | - |
- Safety Lever Radiator Cap
- Relief pressure 13 lb
- Safety Lever
- Product Attributes:
- Valve OD: 1.14 In
- Cap Depth: 1.32
- Lever Type: Safety Lever
- Coolant Recovery System: Open & Closed System
- Safely remove your radiator cap by venting the pressure from the cooling system before removing the cap. Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10327, 12R6S, 17237, 7913, 9ST13R, P7913, ST13R
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Nissan Altima | L | 2389 | 4 Cyl 2.4L | - |
- Serpentine Belt Driven
- Product Attributes:
- Water Pump Drive Type: Serpentine Belt
- Fan Clutch Included: No
- Mounting Hardware Included: No
- Thermostat And Housing Included: No
- Hub Hole Quantity: 4
- Impeller Vane Quantity: 6
- Impeller Rotation: Reverse
- Includes Back Housing: No
- Pulley Included: No
- Mounting Hole Quantity: 6
Additional Fitment Information:
| Vehicle |
|---|
| 1998 - Nissan Altima |
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- Sandwich Adapter Engine Oil Cooler Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- BTU: 21000
- Cooler inlet size: -8an
- Adapter o-ring size: 2-3/4, 3-1/2
- Cooler height: 8-7/16
- Cooler inlet dim: 8-1/2
- Adapter inlet size: 3/8 Npt
- Rated functional: 250psi Working / 300psi Burst Strength
- Cooler material: Aluminum
- Adapter thickness: 1-3/4, 2-1/8
-
Features:
- 13 Row Plate & Fin Engine Oil Cooler Kit with Sandwich Adapter
- A step up from the popular tube and fin design this aluminum plate and fin-based oil cooler kit not only reduces oil temperatures to help extend the life of lower end components and oil life, it also helps reduce coolant temperatures in the radiator and cooling system. This universal kit includes engine sandwich adapter, hose and everything you need to install on most passenger vehicles on the road today.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Nissan Altima | L | 2389 | 4 Cyl 2.4L | - |
- Adjustable Electric Fan Controller, Push In Radiator Probe
- 2 Required
- Adjustable Electric Fan Controller, Push In Radiator Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Trigger: Ground Circuit
-
Features:
- Adjustable Electric Fan Controller, Push In Radiator Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a push-in radiator probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Nissan Altima | L | 2389 | 4 Cyl 2.4L | - |
- 4 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit
- 16 5/8" x 5 1/8" x 3/4"
- 4 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit
- 7000 Series 4 Pass 11/32" Hose Barb Kit
- Product Attributes:
- Inlet dim: 3-3/4
- GVW: 14000
- Width: 16-5/8
- Height: 5-1/8
- Mounting: 13-3/4
- Depth: 3/4
-
Features:
- 4 Pass 17" Series 7000 Copper/Aluminum Transmission Cooler Kit
- This Tube & Fin transmission cooler features 1/2" copper tubing expanded into aluminum cooling fins and include embossed turbulators which serve to agitate fluid for maximum heat transfer. Perfect for today's highly-stressed compact cars and SUVs', they improve shifting performance and extend the life of the transmission by eliminating heat-related transmission failures. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Nissan Altima | L | 2389 | Automatic | United States | 4 Cyl 2.4L | - |
- 14" High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- 2 Required
- 14" High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- High Performance
- Product Attributes:
- CFM high/low: 2100/1500
- Amp draw high/low: 22/16.2
- Width: 14-1/2
- Height: 14-1/2
- Mounting: 8-3/4 X 13-1/4
- Depth: 2-5/8
-
Features:
- 14" High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- A very popular primary cooling fan, this 14" High Output Single RAD fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 2100 CFM while drawing up to 22 amps.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Nissan Altima | L | 2389 | 4 Cyl 2.4L | - |
- 14" Tornado Electric Puller Fan, Premium Mounting Kit
- 2 Required
- 14" Tornado Electric Puller Fan, Premium Mounting Kit
- Standard Duty, Premium Hardware Kit
- Product Attributes:
- Airflow: Puller (reversible)
- Blade size: 13-3/8
- Width: 14-1/2
- CFM: 1350
- Height: 13-5/8
- Mounting: 12-3/8 X 9
- Depth: 2
-
Features:
- 14" Tornado Electric Puller Fan, Premium Mounting Kit
- This extremely popular 14" reversible Tornado fan uses 8 skewed blades and its quiet, high torque electric motor producing a healthy 1350 CFM at 0 static pressure, drawing only 10.5 amps. Fan kit includes everything you will need for a manual switch installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Nissan Altima | L | 2389 | 4 Cyl 2.4L | - |
- Product Attributes:
- Cross Section: K-section
- Top Width: .82
- Rib Profile: Straight Rib
- Outside Circumference:
- 1351.03
- 53.19
- Rib Depth: Standard
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 1335.03
- 52.56
- Rib Quantity: 6
- Minimum Operating Temperature:
- -42.7
- -45
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
01-24196-000, 01-24196-003, 01-24196-013, 01-26709-002, 01-29729-330, 02-26709-002, 11720-1E400, 11720-9E001, 11720-9F001, 1833620C1, 25-060525, 25-060525HD, 25-71336, 3101293, 3101299, 311299, 3559397C1, 3560861C1...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Nissan Altima | Alternator, Water Pump and Power Steering |
- Radiator cap
- Relief pressure 13 lb
- Standard
- Product Attributes:
- Cap Depth: 0.97
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10227, 10227ST, 12R6, 1678-20166, 17137, 19317447, 214307999C, 21430F430A, 2533005000, 52467188, 7513, 7513-RC, 94842508, 94847233, 94854943, 96051840, 96051843, 96060164...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Nissan Altima | L | 2389 | 4 Cyl 2.4L | - |
Showing 1 - 10 of 63 products
Loading...