2000 Honda Insight Belts and Cooling Parts
Choose your Part Name for your 2000 Honda Insight
Accessory Drive Belt
Accessory Drive Belt Tensioner Pulley
Engine Coolant Reservoir Cap
Engine Coolant Reservoir Hose Connector
Engine Coolant Temperature Sensor
Engine Coolant Temperature Sensor O-Ring
Engine Coolant Thermostat
Engine Coolant Thermostat Gasket
Engine Coolant Water Inlet Gasket
Engine Cooling Fan
Engine Cooling Fan Controller
Engine Cooling Fan Shroud Bolt
Engine Cooling Fan Switch
Engine Oil Cooler Gasket
Engine Oil Cooler O-Ring
Engine Oil Cooler Seal
Engine Water Pump
Radiator
Radiator Cap
Radiator Drain Plug
Radiator Drain Plug Gasket
Radiator Insulator
Radiator Support Splash Shield Clip
Serpentine Belt
Image
Product
Price
- w/o A.C.
- Product Attributes:
- Cross Section: K-section
- Top Width: .68
- Rib Profile: Straight Rib
- Outside Circumference:
- 37.67
- 956.82
- Rib Depth: Standard
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 37.01
- 940.06
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 5
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
1340A005, 141-1353, 146-050945, 19230-PHM-004, 206996, 25-050370, 25-70936, 31110-P12-A020, 31110-PD6-0030, 31110-PY3-0030, 31110P12A020M2, 370K5, 4050370, 42453, 5K370, 5PK940, 6703, 99365-50940...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Honda Insight | Water Pump |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Honda Insight |
- 12in. Tornado Electric Puller Fan; Standard Mounting Kit
- 880 CFM; 12 in. Fan Size; 12-3/8 in. Width; 11-1/4 in. x 5-1/4 in. Mounting; 11-13/16 in. Height; 1-1/4 in. Depth; 8.8 Amp Draw
- 12in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 880 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- This 12 in. reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Honda Insight |
- 12in. High Output Single RAD Pusher/Puller Fan with Standard Mount Kit
- w/Standard Mount Kit; 21/15 Amp Draw High/Low; 12-3/4 in. Width; 12-3/4 in. Height; 2-5/8 in. Depth; 8-1/4 in. x 11-5/8 in. Mounting; Single
- 12in. High Output Electric Fan; Std Kit
- Radiator Pusher/Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Steel Fan Blades
- Maximum Full-Time Airflow
- Black Powder Coated Finish
- 20 in. Reverse Rotation Design
- Rated Up To 8.000 Revolutions Per Minute
- Our most compact version in our High Output Single RAD fan series, this 12 in. fan is a self-shrouded, symmetrical design with four molded mounting points. Motivated by a 2-speed 265 watt Bosch motor driving 11 patented skewed blades, it can be used as a pusher or puller fan by simply flipping brackets without changing direction of the unit. Moves up to 1450 CFM while drawing up to 21 amps.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Honda Insight |
- Radiator cap
- Relief pressure 16 lb
- Standard
- Product Attributes:
- Valve OD: 1.30 In
- Cap Depth: 0.85
- Lever Type:
- No
- Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10242, 10242ST, 12R19, 1640131520, 1640131650, 1640131792, 1640131830, 1640136020, 1640137520, 1640146610, 1640150370, 1640175440, 1650221060, 1650221080, 1678-20126, 17037, 19045PWA004, 19045RAA003...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Honda Insight | L | 995 | 3 Cyl 1.0L | 61 |
- Thermostat-192 Degrees
- Temperature 192F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.38 In
- Temperature (Degree): 192
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T120E, 192-644, 19301PHM305, 19301RMX306, 34818, 446-192, 44692, 54692, 9446192, NI, P44692
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Honda Insight | L | 995 | 3 Cyl 1.0L | 61 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Honda Insight |
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Honda Insight |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Honda Insight |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- May need 19106-PA0-020 Connector sold separately
- The expansion tank hose connector elbow is serviced separately.
Additional Fitment Information:
| Vehicle |
|---|
| 2000 - Honda Insight |
Showing 1 - 10 of 50 products
Loading...